[SLE] (Revisited) Works in Windoze, NOT in SuSE!?!?!?!?!?!?

From: Bernd (bernd_at_covenantmail.net)
Date: 09/15/03

  • Next message: Johnny Ernst Nielsen: "Re: [SLE] Can't get updates" 
    To: Lincoln Ramsay <ramsayl@bigfoot.com>, SuSE Users Group <suse-linux-e@suse.com>
Date: Mon, 15 Sep 2003 10:22:38 -0700

    On Sunday, 14 September, 2003 17:17, Lincoln Ramsay wrote:
    <snip>
    > If your modem is a top-of-the-line one, I would expect it to have no
    > problems. I'd guess Windows does stuff with the modem to prevent the
    > disconnection, perhaps it keeps the line busy with null/echo packets or
    > something. Try unplugging your phones though as that worked for me.

    Thanks, but...

    Removed the phones, rewired the phone lines, changed pci slots, changed IRQ's
    in BIOS so the modem would be on its' own IRQ, pinged, echoed, set idle time
    to indefinite, removed idle time, changed AT commands to match those in
    windoze exactly, added additional AT commands to allow flex in line noise,
    verified windoze com port is same as linux ttyS (com5=ttyS4), on and on and
    on..................

    It is sooo scary to me that my modem (USR PCI 56K FaxModem Model 5610 (rev
    01)), which is fully supported in SuSE, works in windoze, yet I get a
    (SIGHUP) and get dumped in linux.

    <snip>

    Thanks again! Any other suggestions are greatfully appreciated!!!

    MTIA

    Bernd 

    -- 
"If you want to build a ship, don't drum up the men to gather
wood, divide the work, and give orders. Instead, teach them
to yearn for the vast and endless sea."
Antoine de St. Exupery
-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Johnny Ernst Nielsen: "Re: [SLE] Can't get updates"

    Relevant Pages

    • Re: [SLE] (Revisited) Works in Windoze, NOT in SuSE!?!?!?!?!?!?
      ... > modem will be initialised with is to put the string in yourself. ... <serious snip> ... and verified to the modem manufacturers list of commands. ... may be appropriate to eliminate disconnect due to line noise and idle time, ...
      (SuSE)
    • Re: minicom serial output
      ... >doesn't react and a multimeter accross the serial port shows that no data ... >initialisation / hangup commands. ... I already changed the modem initialisation string to ... present minicom configuration, go back to the default configuration ...
      (comp.os.linux.hardware)
    • Re: Great SWT Program
      ... to unite temporarily against their common enemy -- me? ... the manual to write a shell script, oops, .bat file. ... (It lists all commands whose ...
      (comp.lang.java.programmer)
    • Re: minicom serial output
      ... >>doesn't react and a multimeter accross the serial port shows that no data ... I already changed the modem initialisation string to ... >>'D' (one of the commands recognised by my device) and I can get my device ... > present minicom configuration, go back to the default configuration ...
      (comp.os.linux.hardware)
    • Re: recording voice through a independent TSP
      ... I have no experience in developing a wav driver. ... > so where will be my translations from TAPI commands to the PBX ... Unimodem can translate between TAPI and AT modem commands. ...
      (microsoft.public.win32.programmer.tapi)