Re: [SLE] nic problem - solved

• Previous message: John Andersen: "Re: [SLE] ssh configuration"
• In reply to: John Andersen: "Re: [SLE] nic problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: Suse <suse-linux-e@suse.com>
Date: Fri, 19 Sep 2003 23:22:18 -0700

I'm good now. Some how, some way, my modules for the nic didn't load.
I'm still trying to figure that one out.

Tom

On Fri, 2003-09-19 at 23:11, John Andersen wrote:

> On Friday 19 September 2003 21:03, tom@neuro-logic.com wrote:
> > Hi kids.
> >
> > I came home from work today and found my 8.2 box locked up, so I hit the
> > reset button and moved on. I popped open a Guiness and sat down ready to
> > read some email when I noticed that I couldn't access the net. Upon
> > further examination, I found that when I ran an rcnetwork restart, my eth0
> > failed to come up. When I run an ifconfig all I see is my lo. My router
> > port lights up and my lights on the back of my nic light up. I can't ping
> > my box from my wife's laptop (w2k).
> >
> > So, anyone have any ideas? I tried reseating the nic. If I delete my nic
> > from yast and start over, my nic pops right up and is identified. I'm out
> > of options.
>
> Tom:
> Check your wires, its more often that than the nic itself.
> Nics cost 6 bucks. Don't waste your time dicking around
> with it, ask your computer friends if they have a spare.
>
>
> --
> _____________________________________
> John Andersen

- - - - - - - - - - - - - - - - - -

Tom Nielsen
Neuro Logic Systems, Inc.
805.389.5435 x18
www.neuro-logic.com

• Previous message: John Andersen: "Re: [SLE] ssh configuration"
• In reply to: John Andersen: "Re: [SLE] nic problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]