Re: [SLE] 9.0 DVD installation troubles

From: Terence McCarthy (tjmc_at_torhouse.eclipse.co.uk)
Date: 11/02/03

  • Next message: Chris Smith: "[SLE] Clearing the location bar in Konqueror" 
    Date: Sun, 2 Nov 2003 08:11:15 +0000
To: suse-linux-e@suse.com

    On Sat, 01 Nov 2003 21:35:12 -0500
    "Rafael E. Herrera" <raffo@neuronet.pitt.edu> wrote:

    > A temporary solution for those of you who haven't installed/upgraded
    > yet, I would disconnect any extra CD-ROM drives and leave the DVD as
    > master and the only cd drive in the system.

    I installed 9.0 yesterday morning from dvd- (the only hiccup was, once installed, having to boot using acpi=no to stop the machine powering up and straightaway shutting down!), with a cdrw also installed in my box.

    However, when KDE came up it told me it had detected a new piece of hardware which was my cdrw, and it's now in fstab as a scsi and a ide drive.

    Terence 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Chris Smith: "[SLE] Clearing the location bar in Konqueror"

    Relevant Pages

    • Lost CDRW and DVD Drives
      ... Now I have lost my CDRW and DVD drives, they get boot error: ... Should I update the BIOS? ...
      (microsoft.public.windowsxp.hardware)
    • RE: Lost CDRW and DVD Drives
      ... Now I have lost my CDRW and DVD drives, they get boot error: ...
      (microsoft.public.windowsxp.hardware)
    • Re: Attn: Frodo >> Installing DVD (was zip drive data rescue)
      ... the same motherboard and hard drives after all. ... The Manual showed configurations for sharing DVD & HD ... Master, is not going to limit the new AOpen DVD drive's capabilities? ... or 1 seen on the IDE cable or via the Master/Slave jumper scheme. ...
      (microsoft.public.windowsxp.hardware)
    • Re: CDVD on Iyonix
      ... and set to Master. ... 420MB not wanting to be slave to certain other drives, ... If I swap the DVDRW to the CDRW ribbon the DVDRW works from ... of the ribbon cables, then each of those devices must be set as ...
      (comp.sys.acorn.hardware)
    • Re: cdrom does not mount
      ... This morning I disabled certain services so as to enable FC5 Linux to ... Both of my cdrw and dvd are currently not being mounted although kudzu ... Now the GUI lists the cd and dvd drives. ...
      (alt.os.linux)