RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card
From: Stuart Powell (stuart_at_yorkshirepudding.com)
Date: 12/23/03
- Previous message: Charles Love: "Re: [SLE] ATI Radeon Question - Driver on SuSE 9.0"
- In reply to: Craig Herring: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Next in thread: Stuart Powell: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Reply: Stuart Powell: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: "SuSE Linux List" <suse-linux-e@suse.com> Date: Mon, 22 Dec 2003 21:13:00 -0600
Hello.
Oh, yes, I forgot to mention that I tried the various acpi and APIC
disabling options, and still no joy. My aging IBM had a similar problem way
back when, and the noapic option cured it.
I did wonder if using the older megaraid driver might work better, but I was
concerned that it didn't even seem to be trying to load the correct driver.
And I did check and see which PCI slot the RAID card is supposed to be in,
and I do have the card in the properly supported slot for the machine type.
Bye for now,
Stuart.
-----Original Message-----
From: Craig Herring [mailto:cherring@nbbc.edu]
Sent: Monday, December 22, 2003 15:54
To: SuSE Linux List
Subject: RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID
3si Card
I have the same problem except we have a server with an Adaptec 2010S
ZCR RAID card configured with 2x36GB and 3x72GB drives. Trying to boot
using the 2x36GB as RAID 1.
Try disabling acpi
Boot using the option
acpi=off
Craig Herring
-----Original Message-----
From: Stuart Powell [mailto:stuart@yorkshirepudding.com]
Sent: Sunday, December 21, 2003 12:23 AM
To: SuSE Linux List
Subject: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si
Card
Hello, everyone.
I just tried a couple of times to install 9.0 on a spare HP Netserver
LC3 I
have here. The two 9GB hard drives are mirrored via the NetRAID 3si
card.
I understand this card is an LSI MegaRAID 438 card, and as such have
tried
using the megaraid2 driver. The installation goes OK, although I had to
manually select the RAID driver as it wasn't autodetected. Partitioning
seems to go OK, and the packages all install, but after the first boot,
there's a kernel panic. I don't see the RAID driver being loaded, and
the
panic occurs as the system fails to mount / from sda2.
Has anyone had success with this setup ? I have an identical machine
that I
plan to install SLOX4.1 onto this week, and this problem concerns me
somewhat. I bought the 3si card as it was the only HP RAID card that
shows
up in the SuSE hardware database, and it shows as being fully supported.
Bye for now,
Stuart.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
- Previous message: Charles Love: "Re: [SLE] ATI Radeon Question - Driver on SuSE 9.0"
- In reply to: Craig Herring: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Next in thread: Stuart Powell: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Reply: Stuart Powell: "RE: [SLE] Problems Installing 9.0 on Netserver LC3 w/ NetRAID 3si Card"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|