[SLE] How do I use a virtual mixer with Suse and an Intel8x0 sound card?

From: Sam Stern (samstern_at_samstern.net)
Date: 01/12/04

  • Next message: Russ: "Re: [SLE] Game - Neverball"
    To: Suse_Discuss <suse-linux-e@suse.com>
    Date: Sun, 11 Jan 2004 20:15:34 -0500
    
    

    All,

    I would like to setup the following scenario:

    1) Run Xmms to listen to music.
    2) Run Vmware and get sounds from my virtual machine(s)
    3) Run Win4Lin (with it's much better clipboard integration) and hear
    event sounds from that program.
    3) Hear alert sounds from Suse's KDE interface.

    I can obtain this exact functionality using the for-pay oss "virtual
    mixer" product. However, OSS's midi support does not work well with my
    favorite game, Never winter nights. Suse's ALSA support provides great
    performance for that game, or any other use -- so long as only one
    program is using the sound system at at a time. If two or more sounds
    play at one time, one or both will fail. I would like to change this.

    So I was wondering if I can use Suse's sound system to perform the
    virtual mixing, and if so how??

    BTW, RTFM (Which FM??) gracefully accepted, silly flames to /dev/null.

    -- Begin Technical configuration information

    Base Sound Card (from lsmod):

    snd-intel8x0 19588 4
    snd-pcm 65092 0 [snd-pcm-oss snd-intel8x0]
    snd-timer 15040 0 [snd-seq snd-pcm]
    snd-ac97-codec 39608 0 [snd-intel8x0]
    snd-mpu401-uart 3584 0 [snd-intel8x0]
    snd-rawmidi 14208 0 [snd-mpu401-uart]
    snd-seq-device 4048 0 [snd-seq snd-rawmidi]
    snd-page-alloc 6004 0 [snd-intel8x0 snd-pcm]
    snd 35172 4 [snd-seq snd-pcm-oss snd-mixer-oss
    snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart
    snd-rawmidi snd-seq-device]
    soundcore 3588 0 [snd]

    uname -a: Linux hermes 2.4.21-166-default #1 Wed Jan 7 03:10:21 UTC 2004
    i686 i686 i386 GNU/Linux

    Dmesg:

    samstern@hermes:~> dmesg
    emap area available.
    127MB HIGHMEM available.
    896MB LOWMEM available.
    ACPI: have wakeup address 0xc0001000
    On node 0 totalpages: 262016
    zone(0): 4096 pages.
    zone(1): 225280 pages.
    zone(2): 32640 pages.
    IBM machine detected. Enabling interrupts during APM calls.
    ACPI: Searched entire block, no RSDP was found.
    ACPI: RSDP located at physical address c00f6350
    RSD PTR v0 [PTLTD ]
    __va_range(0x3fef73ec, 0x68): idx=8 mapped at ffff6000
    ACPI table found: RSDT v1 [PTLTD RSDT 1540.208]
    __va_range(0x3fefaee2, 0x24): idx=8 mapped at ffff6000
    __va_range(0x3fefaee2, 0x74): idx=8 mapped at ffff6000
    ACPI table found: FACP v1 [IBM NETVISTA 1540.208]
    __va_range(0x3fefaf56, 0x24): idx=8 mapped at ffff6000
    __va_range(0x3fefaf56, 0x32): idx=8 mapped at ffff6000
    ACPI table found: TCPA v1 [IBM NETVISTA 1540.208]
    ACPI: Unsupported table TCPA
    __va_range(0x3fefaf88, 0x24): idx=8 mapped at ffff6000
    __va_range(0x3fefaf88, 0x50): idx=8 mapped at ffff6000
    ACPI table found: APIC v1 [PTLTD APIC 1540.208]
    __va_range(0x3fefaf88, 0x50): idx=8 mapped at ffff6000
    LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
    CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version
    20

    IOAPIC (id[0x1] address[0xfec00000] global_irq_base[0x0])
    INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
    LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
    1 CPUs total
    Local APIC address fee00000
    __va_range(0x3fefafd8, 0x24): idx=8 mapped at ffff6000
    __va_range(0x3fefafd8, 0x28): idx=8 mapped at ffff6000
    ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.208]
    Building zonelist for node : 0
    Kernel command line: root=/dev/hdh1 vga=0x317 acpi=off desktop
    hdc=ide-scsi hdclun=0 splash=silent
    ide_setup: hdc=ide-scsi
    ide_setup: hdclun=0
    bootsplash: silent mode.
    Initializing CPU#0
    Detected 1993.759 MHz processor.
    Console: colour dummy device 80x25
    Calibrating delay loop... 3932.16 BogoMIPS
    Memory: 1031996k/1048064k available (1583k kernel code, 15612k reserved,
    605k data, 160k init, 130496k highmem)
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    CPU: Common caps: bfebfbff 00000000 00000000 00000000
    CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    ACPI: Subsystem revision 20030619
    ACPI: Disabled via command line (acpi=off)
    PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=2
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
    PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
    PCI: Found IRQ 5 for device 00:1f.1
    PCI: Sharing IRQ 5 with 00:1d.2
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    apm: BIOS not found.
    Starting kswapd
    bigpage subsystem: allocated 0 bigpages (=0MB).
    allocated 32 pages and 32 bhs reserved for the highmem bounces
    kinoded started
    VFS: Disk quotas vdquot_6.5.1
    aio_setup: num_physpages = 65504
    aio_setup: sizeof(struct page) = 48
    vesafb: framebuffer at 0xe0000000, mapped to 0xf8810000, size 65536k
    vesafb: mode is 1024x768x16, linelength=2048, pages=1
    vesafb: protected mode interface info at c000:e9d0
    vesafb: scrolling: redraw
    vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size
    22326 bytes, found (1024x768, 11098 bytes, v3).
    bootsplash: silent jpeg found.
    bootsplash: silent jpeg found.
    Console: switching to colour frame buffer device 118x38
    fb0: VESA VGA frame buffer device
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
    SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    PCI: Found IRQ 11 for device 02:0a.0
    Redundant entry in serial pci_table. Please send the output of
    lspci -vv, this message (12b9,1008,12b9,00d3)
    and the manufacturer and name of serial board or modem board
    to serial-pci-info@lists.sourceforge.net.
    ttyS04 at port 0x2068 (irq = 11) is a 16550A
    Real Time Clock Driver v1.10e
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    loop: loaded (max 16 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    PIIX-4: IDE controller at PCI slot 00:1f.1
    PCI: Enabling device 00:1f.1 (0005 -> 0007)
    PCI: Found IRQ 5 for device 00:1f.1
    PCI: Sharing IRQ 5 with 00:1d.2
    PIIX-4: chipset revision 1
    PIIX-4: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
    PDC20269: IDE controller at PCI slot 02:09.0
    PCI: Found IRQ 9 for device 02:09.0
    PDC20269: chipset revision 2
    PDC20269: not 100% native mode: will probe irqs later
        ide2: BM-DMA at 0x2040-0x2047, BIOS settings: hde:pio, hdf:pio
        ide3: BM-DMA at 0x2048-0x204f, BIOS settings: hdg:pio, hdh:pio
    hda: ST340014A, ATA DISK drive
    blk: queue c03bc8e0, I/O limit 4095Mb (mask 0xffffffff)
    hdc: OPTORITEDVD RW DD0203, ATAPI CD/DVD-ROM drive
    hdh: Maxtor 6E040L0, ATA DISK drive
    blk: queue c03bd7f8, I/O limit 4095Mb (mask 0xffffffff)
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    ide3 at 0x2058-0x205f,0x2052 on irq 9
    hda: attached ide-disk driver.
    hda: host protected area => 1
    hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63,
    UDMA(100)
    hdh: attached ide-disk driver.
    hdh: host protected area => 1
    hdh: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=79656/16/63,
    UDMA(133)
    ide-floppy driver 0.99.newide
    Partition check:
     hda: hda1 hda2 hda3
     hdh: [PTBL] [4998/255/63] hdh1
    ide-floppy driver 0.99.newide
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    cryptoapi: loaded
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 344k freed
    VFS: Mounted root (ext2 filesystem).
    SCSI subsystem driver Revision: 1.00
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    reiserfs: found format "3.6" with standard journal
    reiserfs: enabling write barrier flush mode
    reiserfs: using ordered data mode
    reiserfs: checking transaction log (device ide3(34,65)) ...
    for (ide3(34,65))
    Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Trying to move old root to /initrd ... failed
    Unmounting old root
    Trying to free ramdisk memory ... okay
    Freeing unused kernel memory: 160k freed
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    reiserfs: enabling write barrier flush mode
    device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
    reiserfs: enabling write barrier flush mode
    reiserfs: enabling write barrier flush mode
    reiserfs: enabling write barrier flush mode
    Adding Swap: 714884k swap-space (priority 42)
    hdc: attached ide-scsi driver.
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
      Vendor: OPTORITE Model: DVD RW DD0203 Rev: 2.30
      Type: CD-ROM ANSI SCSI revision: 02
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 941M
    agpgart: Detected an Intel(R) 845G, but could not find the secondary
    device. Assuming a non-integrated video card.
    agpgart: Detected Intel(R) 845G chipset
    agpgart: AGP aperture is 64M @ 0xd0000000
    0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328
    Wed Dec 17 13:54:51 PST 2003
    hdc: CHECK for good STATUS
    Intel(R) PRO/100 Network Driver - version 2.3.27
    Copyright (c) 2003 Intel Corporation

    PCI: Found IRQ 11 for device 02:08.0
    PCI: Sharing IRQ 11 with 02:0c.0
    e100: selftest OK.
    e100: eth0: Intel(R) PRO/100 Network Connection
      Hardware receive checksums enabled

    ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
    PCI: Found IRQ 11 for device 02:0c.0
    PCI: Sharing IRQ 11 with 02:08.0
    ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c4009000-c40097ff] Max
    Packet=[2048]
    ieee1394: Node added: ID:BUS[0-00:1023] GUID[00d04b351b04f46e]
    ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a38d48]
    ieee1394: Node added: ID:BUS[0-02:1023] GUID[0030e001e0001c12]
    ieee1394: The root node is not cycle master capable; selecting a new
    root node and resetting...
    ieee1394: Node changed: 0-02:1023 -> 0-00:1023
    ieee1394: Node changed: 0-00:1023 -> 0-01:1023
    ieee1394: Node changed: 0-01:1023 -> 0-02:1023
    e100: eth0 NIC Link is Up 100 Mbps Full duplex
    raw1394: /dev/raw1394 device initialized
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    PCI: Found IRQ 9 for device 00:1d.7
    PCI: Setting latency timer of device 00:1d.7 to 64
    ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 Enhanced Host Controller
    ehci_hcd 00:1d.7: irq 9, pci mem fc8d6000
    usb.c: new USB bus registered, assigned bus number 1
    ehci_hcd 00:1d.7: enabled 64bit PCI DMA
    PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
    PCI: 00:1d.7 PCI cache line size corrected to 32.
    ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
    hub.c: USB hub found
    hub.c: 6 ports detected
    usb-uhci.c: $Revision: 1.275 $ time 18:43:16 Dec 18 2003
    usb-uhci.c: High bandwidth mode enabled
    PCI: Found IRQ 11 for device 00:1d.0
    PCI: Sharing IRQ 11 with 01:00.0
    PCI: Setting latency timer of device 00:1d.0 to 64
    usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 2
    hub.c: USB hub found
    hub.c: 2 ports detected
    PCI: Found IRQ 10 for device 00:1d.1
    PCI: Setting latency timer of device 00:1d.1 to 64
    usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 10
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 3
    hub.c: USB hub found
    hub.c: 2 ports detected
    PCI: Found IRQ 5 for device 00:1d.2
    PCI: Sharing IRQ 5 with 00:1f.1
    PCI: Setting latency timer of device 00:1d.2 to 64
    usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 5
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 4
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    uhci.c: USB Universal Host Controller Interface driver v1.1
    mice: PS/2 mouse device common for all mice
    sbp2: $Rev: 1018 $ Ben Collins <bcollins@debian.org>
    scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
    blk: queue c3518214, I/O limit 4095Mb (mask 0xffffffff)
    Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.12
    ieee1394: sbp2: Logged into SBP-2 device
    ieee1394: sbp2: Node 0-01:1023: Max speed [S400] - Max payload [2048]
    ieee1394: sbp2: Logged into SBP-2 device
    ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
    scsi singledevice 1 0 0 0
    blk: queue c3518c14, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 0 0
      Vendor: WDC WD12 Model: 00BB-00DWA0 Rev: 15.0
      Type: Direct-Access ANSI SCSI revision: 06
    blk: queue c3518e14, I/O limit 4095Mb (mask 0xffffffff)
    Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
    SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
     sda: sda1
    scsi singledevice 1 0 1 0
    scsi singledevice 1 0 1 0
      Vendor: IC35L180 Model: AVV207-1 Rev:
      Type: Direct-Access ANSI SCSI revision: 06
    blk: queue c3966014, I/O limit 4095Mb (mask 0xffffffff)
    Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
    SCSI device sdb: 361882080 512-byte hdwr sectors (185284 MB)
     sdb: sdb1 <<6>scsi singledevice 1 0 2 0
    blk: queue c390d214, I/O limit 4095Mb (mask 0xffffffff)
     sdb5 >
    scsi singledevice 1 0 2 0
    blk: queue c3966014, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 3 0
    scsi singledevice 1 0 3 0
    blk: queue c390d414, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 4 0
    scsi singledevice 1 0 5 0
    blk: queue c390d614, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 4 0
    blk: queue c390d814, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 6 0
    blk: queue c390de14, I/O limit 4095Mb (mask 0xffffffff)
    scsi singledevice 1 0 5 0
    scsi singledevice 1 0 7 0
    scsi singledevice 1 0 6 0
    scsi singledevice 1 0 7 0
    PCI: Found IRQ 9 for device 00:1f.5
    PCI: Sharing IRQ 9 with 00:1f.3
    PCI: Setting latency timer of device 00:1f.5 to 64
    intel8x0: clocking to 48000
    IPsec Security Association Database (SADB): initialized.
    IPsec Security Policy Database (SPD): initialized.
    IPsec PF_KEY V2: initialized
    IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
    IPv6 over IPv4 tunneling driver
    parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
    parport0: irq 7 detected
    lp0: using parport0 (polling).
    usb.c: registered new driver serial
    usbserial.c: USB Serial support registered for Generic
    usbserial.c: USB Serial Driver core v1.4
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    /dev/vmmon: VMMON CPUID: Unrecognized CPU
    /dev/vmmon: Module vmmon: registered with major=10 minor=165
    /dev/vmmon: Module vmmon: initialized
    /dev/vmnet: open called by PID 2204 (vmnet-bridge)
    /dev/vmnet: hub 0 does not exist, allocating memory.
    /dev/vmnet: port on hub 0 successfully opened
    bridge-eth0: up
    bridge-eth0: attached
    /dev/vmnet: open called by PID 2232 (vmnet-natd)
    /dev/vmnet: hub 8 does not exist, allocating memory.
    /dev/vmnet: port on hub 8 successfully opened
    eth0: no IPv6 routers present
    win4lin: mki_version 5, num_cpus 1, pae 0
    win4Lin: preempt_enable 0x00000000
    Linux video capture interface: v1.00
    /dev/vmnet: open called by PID 3156 (vmnet-netifup)
    /dev/vmnet: hub 2 does not exist, allocating memory.
    /dev/vmnet: port on hub 2 successfully opened
    /dev/vmnet: open called by PID 3155 (vmnet-netifup)
    /dev/vmnet: hub 1 does not exist, allocating memory.
    /dev/vmnet: port on hub 1 successfully opened
    /dev/vmnet: open called by PID 3154 (vmnet-netifup)
    /dev/vmnet: port on hub 8 successfully opened
    /dev/vmnet: open called by PID 3224 (vmnet-dhcpd)
    /dev/vmnet: port on hub 1 successfully opened
    /dev/vmnet: open called by PID 3219 (vmnet-dhcpd)
    /dev/vmnet: port on hub 8 successfully opened
    /dev/vmnet: open called by PID 3220 (vmnet-dhcpd)
    /dev/vmnet: port on hub 2 successfully opened
    vmnet2: no IPv6 routers present
    vmnet1: no IPv6 routers present
    vmnet8: no IPv6 routers present

    -- 
    Check the headers for your unsubscription address
    For additional commands send e-mail to suse-linux-e-help@suse.com
    Also check the archives at http://lists.suse.com
    Please read the FAQs: suse-linux-e-faq@suse.com
    

  • Next message: Russ: "Re: [SLE] Game - Neverball"

    Relevant Pages

    • Re: Machine check expection panic
      ... PCI: PCI BIOS revision 2.10 entry at 0xf1180, ... drivers/usb/core/usb.c: registered new driver usbfs ... drivers/usb/core/usb.c: registered new driver hub ... Using ACPI for IRQ routing ...
      (Linux-Kernel)
    • 2.6.* + suspend/resume kills USB
      ... PCI: PCI BIOS revision 2.10 entry at 0xfc0be, ... Dell laptop SMM driver v1.13 14/05/2002 Massimo Dal Zotto ... drivers/usb/core/usb.c: registered new driver hub ... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ...
      (Linux-Kernel)
    • IDE:PORTS ALREADY IN USE | USB: irq 11: nobody cared! | loop pcmcia_core.ko which needs pcmcia_core.
      ... VP_IDE: IDE controller at PCI slot 0000:00:11.1 ... USB no longer working. ... irq 11: nobody cared! ... 15 nodes reported by PnP BIOS; 15 recorded by driver ...
      (Linux-Kernel)
    • 2.6.15-rc5-mm2 does not boot on AMD64 with sata_sil
      ... Using ACPI for IRQ routing ... Uniform CD-ROM driver Revision: 3.20 ... Using ACPI for SMP configuration information Allocating PCI resources starting at e2000000 Checking aperture... ... Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x8000. ...
      (Linux-Kernel)
    • libata timeout, MCE and kernel panic
      ... ACPI: PM-Timer IO Port: 0x408 ... Allocating PCI resources starting at e1000000 ... registered new interface driver usbfs ... registered new interface driver hub ...
      (Linux-Kernel)