RE: [SLE] DHCP & Networking (partial success)

• Previous message: Cody, Adam: "RE: [SLE] vnc hangs nfs and samba..."
• In reply to: humvee: "Re: [SLE] DHCP & Networking (partial success)"
• Next in thread: Kenneth Schneider: "RE: [SLE] DHCP & Networking (partial success)"
• Reply: Kenneth Schneider: "RE: [SLE] DHCP & Networking (partial success)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: <suse-linux-e@suse.com>
Date: Tue, 20 Jan 2004 13:05:24 -0600

Hi,

I updated the bootloader file with "acpi=off" and did "rcnetwork restart"
but still no connectivity.

Ran "grep -i eth0 /var/log/boot.msg", output below. I'm not sure what to
look for.

eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -H
-D -N -t 999999 -h linux eth0 ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=24
INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a
RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 HOME=/ SHLVL=4
splash=silent sscripts=37 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]

Ran "grep on the /var/log/messages" and "dmesg" and received:
eth0: no IPv6 routers present

CB

-----Original Message-----
From: humvee [mailto:humvee@btopenworld.com]
Sent: Tuesday, January 20, 2004 6:26 AM
To: Batt Family; suse e mailing list
Subject: Re: [SLE] DHCP & Networking (partial success)

Hi CB

Sorry you are not fully connected yet.

Did you adjust the bootloader file to "acpi=off" ?

Do this via YAST2 > Misc > Bootloader configuration?

Have you returned all the eth0 configurations to the default for
dhcp/dns (because if like me you had tried different combinations of
settings it might be screwed up!!)

Regards

humvee
On Tue, 2004-01-20 at 05:18, Batt Family wrote:
> I'm still not connecting to the internet but at least Linux sees my
Ethernet
> controller now. Thanks to Humvee for helping me find and load a compatible
> driver. I ran a couple of suggested commands and received the below
> information. Any more help would be appreciated.
>
>
>
> I ran "ifstatus eth0" and received "dhcpcd running, eth0 not up.
>
>
>
> Ran "ip addr show" and got:
>
> "eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen
> 100
>
> link/ether 00: brd ff:ff:ff:ff:ff:ff
>
> inet6 fe80::20c:6eff:fe48:212a/64 scope link"
>
>
>
> Ran "hwinfo -netcard" and received:
>
>
>
> 20: PCI 04.0: 0200 Ethernet controller
>
> [Created at pci.65]
>
> Unique ID: 8otl.rDRqBOJ4Sq1
>
> Hardware Class: network
>
> Model: "Asustek nForce2 Ethernet Controller"
>
> Vendor: pci 0x10de "nVidia Corporation"
>
> Device: pci 0x0066 "nForce2 Ethernet Controller"
>
> SubVendor: pci 0x1043 "Asustek Computer, Inc."
>
> SubDevice: pci 0x80a7
>
> Revision: 0xa1
>
> Memory Range: 0xee001000-??? (rw,non-prefetchable)
>
> I/O Ports: 0xd400-0xd407 (rw)
>
> IRQ: 11 (no events)
>
> Driver Info #0:
>
> Driver Status: nvnet is active
>
> Driver Activation Cmd: "modprobe nvnet" ran this command but nothing
> seemed to happen
>
> Config Status: cfg=yes, avail=yes, need=no
>
>
>
> CB
>
>

-- 
-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com

• Previous message: Cody, Adam: "RE: [SLE] vnc hangs nfs and samba..."
• In reply to: humvee: "Re: [SLE] DHCP & Networking (partial success)"
• Next in thread: Kenneth Schneider: "RE: [SLE] DHCP & Networking (partial success)"
• Reply: Kenneth Schneider: "RE: [SLE] DHCP & Networking (partial success)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]