Re: [SLE] Problem with a modem

From: Martin (earl072001_at_yahoo.com)
Date: 01/31/04

  • Next message: James Knott: "Re: [SLE] Comcast and NAT" 
    Date: Fri, 30 Jan 2004 20:12:19 -0800 (PST)
To: suse-linux-e@suse.com

    > Output of the following commands:
    > lspci
    > pnpdump
    >
    > Hope this helps in some way :)
    >
    > Jon

    Jon,

    well, if I tell you my modem is Intel, what magic
    would you suggest me to make that damn modem working
    under 8.2? Anyway, why on this earth are all these
    modem so hard to be recognize by any SuSe version
    automatically?

    Thanks for any help.

    Martin

    00:1f.5 Multimedia audio controller: Intel Corp.
    82801CA/CAM AC'97 Audio (rev 02)
    00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem
    (rev 02)

    __________________________________
    Do you Yahoo!?
    Yahoo! SiteBuilder - Free web site building tool. Try it!
    http://webhosting.yahoo.com/ps/sb/ 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: James Knott: "Re: [SLE] Comcast and NAT"

    Relevant Pages

    • Re: minicom serial output
      ... >doesn't react and a multimeter accross the serial port shows that no data ... >initialisation / hangup commands. ... I already changed the modem initialisation string to ... present minicom configuration, go back to the default configuration ...
      (comp.os.linux.hardware)
    • Re: minicom serial output
      ... >>doesn't react and a multimeter accross the serial port shows that no data ... I already changed the modem initialisation string to ... >>'D' (one of the commands recognised by my device) and I can get my device ... > present minicom configuration, go back to the default configuration ...
      (comp.os.linux.hardware)
    • Re: recording voice through a independent TSP
      ... I have no experience in developing a wav driver. ... > so where will be my translations from TAPI commands to the PBX ... Unimodem can translate between TAPI and AT modem commands. ...
      (microsoft.public.win32.programmer.tapi)
    • Re: minicom serial output
      ... doesn't react and a multimeter accross the serial port shows that no data ... It also reacts to the modem ... 'D' (one of the commands recognised by my device) and I can get my device ... If you are changing the settings each time, ...
      (comp.os.linux.hardware)
    • Re: How to control SIEMENS C35 using microcontroller 8051
      ... >> AT commands are from the old Hayes Modem company. ... >> send it AT commands in C, Forth, Pascal, BASIC, or assembler. ... It usually gets out of the quiescent state to the active state via ...
      (comp.arch.embedded)