Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems
From: Alex Angerhofer (alex_at_chem.ufl.edu)
Date: 03/29/04
- Previous message: Vu Thai: "[SLE] restore point"
- In reply to: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Next in thread: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Reply: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 29 Mar 2004 13:50:39 -0500 (EST) To: SuSE Linux List <suse-linux-e@suse.com>
On Mon, 29 Mar 2004, Johan wrote:
> Mandag 29 marts 2004 19:58 skrev Alex Angerhofer:
> > On Mon, 29 Mar 2004 yep@osterbo-net.dk wrote:
> > > Sorry, just tried an ordinary installation from CD to a IDE drive that I
> > > added
> >
> > Okay. Can't be the network chip then.
> >
> > > Else the setup is like this.
> > >
> > > 1 P4C800-E Deluxe, Intel i875P, DDR400, SATA, FireWire, Gigabit LAN
> > > 1 Pentium 4 Prescott 2.8GHz FSB800, 1MB Cache (Socket 478)
> > > 1GB Dual 512MB DDR550 (PC4400)
> > > 1 Millennium P650, 64 DDR, DualHead, AGPx4, Bulk
> > > 2 SATA Drive('s) Western Digital WD2500JD 250GB
> > > Digital doc5+ fan-control and temperature messurement
> > > http://www.studiedata.dk/productlist.asp?Fane=COLD,COBL
> > > NorthQ 4100 ATX-Power Supply 500Watt, Lownoise 12 db, Temp. Auto Control
> > > Thermal Right SP-94 kobberkøleprofil
> > > - http://www.studiedata.dk/productitem.asp?id=ACTR005&Fane=COLD,COHS
> > > 1 92mm model "F2" Zalman-fan
> > > 1 Digital doc5+ fan-control and temperature messurement
> > > - http://www.studiedata.dk/productitem.asp?id=MCMP021&Fane=COLD,COBL
> > > 1 Chieftec - Maxitower, DA-01BL-D Dragon, Bigtower Blue,
> > >
> > > Exchanged the Matrox Graphics card with a "basic" VGA card of af a sort
> > > for the moment.
> > >
> > > Johan
> >
> > Can you tell us at what point the install hangs? Your disks are of course
> > recognized correctly by the BIOS? Did you try the safe settings or the
> > manual install option, yet? Which IDE channel to you have your CDROM set
> > to and what make is it?
> >
> > Best regards, Alex.
>
> Forgot to mention the DVD Drive (have to install from something right)
>
I had issues with my new DVD burner/reader in installing 9.0 on my home
system (not a P4C800 but a rather old Abit mobo). The only way it worked
was to hang it on the slave of the first IDE channel. I am not saying that
this is necessarily your problem, but it might be something to check.
> Oh it hangs around making the selections
> - Partition setup
> - during installation of packeages
>
Well if it hangs on setting up the partition one would think it has to do
with the drives.
> Could it be that the "old" IDE-harddrive that isn't what it was supposed to be
> anymore !! (IBM). Did run all the HD-tests from IBM though and it passed.
>
Do you need that drive in the box at all? If I understand you correctly
you have two new WD drives set up and you were planning to install on
one of them? In order to identify the problem more closely you might want
to go to a minimal setup, i.e., just one hard drive, and the DVD drive.
HTH, Alex.
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
- Previous message: Vu Thai: "[SLE] restore point"
- In reply to: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Next in thread: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Reply: Johan: "Re: [SLE] ASUS P4C800 and SuSE 9.0 Problems"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
