[SLE] cdrecord failures

From: Pagan (pagan_at_nordaki.net)
Date: 04/01/04

  • Next message: qrn_Hansen?=: "Re: [SLE] Help me please" 
    To: suse-linux-e@suse.com
Date: Thu, 1 Apr 2004 03:01:54 -0600

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    I am still unable to burn cd's at all. I have replaced the burner and can
    successfully burn dvd-/+ formats. However, cds will NOT burn.

    I've compiled latest cdrtools from sources, tried suse's binaries, even the
    cdrecord-ProDVD binaries.

    The burner is an LG 4081b connected to the secondary IDE cable as master using
    scsi emu (/dev/sr0) This same system burned cd's succesfully prior to update
    to 9.0
    Anyone have any suggestions?
    Log file follows:
    System
    - -----------------------
    K3b Version: 0.11.6
    KDE Version: 3.2.1
    QT Version: 3.3.1

    cdrecord
    - -----------------------
    scsidev: '1,0,0'
    scsibus: 1 target: 0 lun: 0
    Linux sg driver version: 3.1.25
    SCSI buffer size: 64512
    /opt/schily/bin/cdrecord: This version of cdrecord does not include
    DVD-R/DVD-RW support code.
    /opt/schily/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
    cdrecord-ProDVD.
    /opt/schily/bin/cdrecord: Free test versions and free keys for personal use
    are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
    Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
    Schilling
    TOC Type: 0 = CD-DA
    Using libscg version 'schily-0.8'.
    Driveropts: 'burnfree'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 2
    Capabilities :
    Vendor_info : 'HL-DT-ST'
    Identifikation : 'DVDRAM GSA-4081B'
    Revision : 'A100'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x000A
    Profile: 0x0012
    Profile: 0x0011
    Profile: 0x0014
    Profile: 0x0013
    Profile: 0x001A
    Profile: 0x001B
    Profile: 0x0010
    Profile: 0x0009
    Profile: 0x000A (current)
    Profile: 0x0008
    Profile: 0x0002
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1204224 = 1176 KB
    FIFO size : 4194304 = 4096 KB
    pregap1: -1
    Track 01: audio 36 MB (03:39.00) no preemp copy
    Track 02: audio 40 MB (04:01.36) no preemp copy
    Track 03: audio 33 MB (03:19.93) no preemp copy
    Track 04: audio 45 MB (04:28.32) no preemp copy
    Track 05: audio 32 MB (03:10.74) no preemp copy
    Track 06: audio 47 MB (04:42.14) no preemp copy
    Track 07: audio 44 MB (04:21.58) no preemp copy
    Track 08: audio 39 MB (03:54.05) no preemp copy
    Track 09: audio 37 MB (03:44.44) no preemp copy
    Track 10: audio 42 MB (04:11.40) no preemp copy
    Track 11: audio 55 MB (05:27.13) no preemp copy
    Total size: 454 MB (45:00.12) = 202509 sectors
    Lout start: 454 MB (45:02/09) = 202509 sectors
    Current Secsize: 2048
    ATIP info from disk:
      Indicated writing power: 5
      Reference speed: 2
      Is not unrestricted
      Is erasable
      ATIP start of lead in: -11635 (97:26/65)
      ATIP start of lead out: 337350 (75:00/00)
      1T speed low: 0 (reserved val 0) 1T speed high: 4
      2T speed low: 8 2T speed high: 0 (reserved val 10)
      power mult factor: 4 6
      recommended erase/write power: 3
      A1 values: 02 4C B0
      A2 values: 4A C8 06
    Disk type: Phase change
    Manuf. index: 3
    Manufacturer: CMC Magnetics Corporation
    Blocks total: 337350 Blocks current: 337350 Blocks remaining: 134841
    Starting to write CD/DVD at speed 4 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
       1 seconds.
       0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    BURN-Free is OFF.
    Turning BURN-Free on
    Performing OPC...
    /opt/schily/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
    Sending CUE ***...
    /opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    CDB: 2A 00 FF FF FF 6A 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.002s timeout 200s
    /opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 00 00 00 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.002s timeout 200s
    /opt/schily/bin/cdrecord: A write error occured.
    /opt/schily/bin/cdrecord: Please properly read the error message above.
    Writing pregap for track 1 at -150
    write track pad data: error after 0 bytes
    BFree: 1176 K BSize: 1176 K
    Starting new track at sector: 0
    Track 01: 0 of 36 MB written.
    write track data: error after 0 bytes
    Writing time: 71.262s
    Average write speed 37.9x.
    Fixating...
    Fixating time: 0.016s
    /opt/schily/bin/cdrecord: fifo had 64 puts and 1 gets.
    /opt/schily/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill
    was 100%.

    cdrecord comand:
    - -----------------------
    /opt/schily/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=4 -dao
    driveropts=burnfree -eject fs=4m -overburn -useinfo -pad -shorttrack
    - -audio /tmp/kde-root/k3b_audio_0_01.wav /tmp/kde-root/k3b_audio_0_02.wav /tmp/kde-root/k3b_audio_0_03.wav /tmp/kde-root/k3b_audio_0_04.wav /tmp/kde-root/k3b_audio_0_05.wav /tmp/kde-root/k3b_audio_0_06.wav /tmp/kde-root/k3b_audio_0_07.wav /tmp/kde-root/k3b_audio_0_08.wav /tmp/kde-root/k3b_audio_0_09.wav /tmp/kde-root/k3b_audio_0_10.wav /tmp/kde-root/k3b_audio_0_11.wav

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.2.2 (GNU/Linux)

    iD8DBQFAa9qH9EKgVX3zIJ4RAqblAJsG2FDB0d5PSpVARi/NFUooVxeSSwCfXHeK
    Px1VWhNxAmFcMexeNHdKxrs=
    =Xstl
    -----END PGP SIGNATURE----- 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: qrn_Hansen?=: "Re: [SLE] Help me please"