Re: [SLE] cdrecord failures

From: Diana Patricia Salas (diana_at_almacenesonly.com)
Date: 04/01/04

  • Next message: John Pettigrew: "[SLE] Re: SusE 9.1 Pro FREE??" 
    To: pagan@nordaki.net
Date: Thu, 01 Apr 2004 09:53:50 -0500

    I had the same problem and four days ago I finally can resolved.

    You have to desactived the SuSEplugger before you want to burn cd's, and
    if you use k3b you have to select DAO write mode not auto.

    I wish this works for you,

    Diana P.

    P.D. Sorry for my English, but I'm still learning.

    El jue, 01-04-2004 a las 04:01, Pagan escribió:

    > -----BEGIN PGP SIGNED MESSAGE-----
    > Hash: SHA1
    >
    > I am still unable to burn cd's at all. I have replaced the burner and can
    > successfully burn dvd-/+ formats. However, cds will NOT burn.
    >
    > I've compiled latest cdrtools from sources, tried suse's binaries, even the
    > cdrecord-ProDVD binaries.
    >
    > The burner is an LG 4081b connected to the secondary IDE cable as master using
    > scsi emu (/dev/sr0) This same system burned cd's succesfully prior to update
    > to 9.0
    > Anyone have any suggestions?
    > Log file follows:
    > System
    > - -----------------------
    > K3b Version: 0.11.6
    > KDE Version: 3.2.1
    > QT Version: 3.3.1
    >
    > cdrecord
    > - -----------------------
    > scsidev: '1,0,0'
    > scsibus: 1 target: 0 lun: 0
    > Linux sg driver version: 3.1.25
    > SCSI buffer size: 64512
    > /opt/schily/bin/cdrecord: This version of cdrecord does not include
    > DVD-R/DVD-RW support code.
    > /opt/schily/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
    > cdrecord-ProDVD.
    > /opt/schily/bin/cdrecord: Free test versions and free keys for personal use
    > are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
    > Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
    > Schilling
    > TOC Type: 0 = CD-DA
    > Using libscg version 'schily-0.8'.
    > Driveropts: 'burnfree'
    > atapi: 1
    > Device type : Removable CD-ROM
    > Version : 0
    > Response Format: 2
    > Capabilities :
    > Vendor_info : 'HL-DT-ST'
    > Identifikation : 'DVDRAM GSA-4081B'
    > Revision : 'A100'
    > Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    > Current: 0x000A
    > Profile: 0x0012
    > Profile: 0x0011
    > Profile: 0x0014
    > Profile: 0x0013
    > Profile: 0x001A
    > Profile: 0x001B
    > Profile: 0x0010
    > Profile: 0x0009
    > Profile: 0x000A (current)
    > Profile: 0x0008
    > Profile: 0x0002
    > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    > Driver flags : MMC-3 SWABAUDIO BURNFREE
    > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    > Drive buf size : 1204224 = 1176 KB
    > FIFO size : 4194304 = 4096 KB
    > pregap1: -1
    > Track 01: audio 36 MB (03:39.00) no preemp copy
    > Track 02: audio 40 MB (04:01.36) no preemp copy
    > Track 03: audio 33 MB (03:19.93) no preemp copy
    > Track 04: audio 45 MB (04:28.32) no preemp copy
    > Track 05: audio 32 MB (03:10.74) no preemp copy
    > Track 06: audio 47 MB (04:42.14) no preemp copy
    > Track 07: audio 44 MB (04:21.58) no preemp copy
    > Track 08: audio 39 MB (03:54.05) no preemp copy
    > Track 09: audio 37 MB (03:44.44) no preemp copy
    > Track 10: audio 42 MB (04:11.40) no preemp copy
    > Track 11: audio 55 MB (05:27.13) no preemp copy
    > Total size: 454 MB (45:00.12) = 202509 sectors
    > Lout start: 454 MB (45:02/09) = 202509 sectors
    > Current Secsize: 2048
    > ATIP info from disk:
    > Indicated writing power: 5
    > Reference speed: 2
    > Is not unrestricted
    > Is erasable
    > ATIP start of lead in: -11635 (97:26/65)
    > ATIP start of lead out: 337350 (75:00/00)
    > 1T speed low: 0 (reserved val 0) 1T speed high: 4
    > 2T speed low: 8 2T speed high: 0 (reserved val 10)
    > power mult factor: 4 6
    > recommended erase/write power: 3
    > A1 values: 02 4C B0
    > A2 values: 4A C8 06
    > Disk type: Phase change
    > Manuf. index: 3
    > Manufacturer: CMC Magnetics Corporation
    > Blocks total: 337350 Blocks current: 337350 Blocks remaining: 134841
    > Starting to write CD/DVD at speed 4 in real SAO mode for single session.
    > Last chance to quit, starting real write in 2 seconds.
    > 1 seconds.
    > 0 seconds. Operation starts.
    > Waiting for reader process to fill input buffer ... input buffer ready.
    > BURN-Free is OFF.
    > Turning BURN-Free on
    > Performing OPC...
    > /opt/schily/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
    > Sending CUE ***...
    > /opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    > CDB: 2A 00 FF FF FF 6A 00 00 1B 00
    > status: 0x2 (CHECK CONDITION)
    > Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
    > Sense Key: 0x5 Illegal Request, Segment 0
    > Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    > Sense flags: Blk 0 (not valid)
    > cmd finished after 0.002s timeout 200s
    > /opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    > CDB: 2A 00 00 00 00 00 00 00 1B 00
    > status: 0x2 (CHECK CONDITION)
    > Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
    > Sense Key: 0x5 Illegal Request, Segment 0
    > Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
    > Sense flags: Blk 0 (not valid)
    > cmd finished after 0.002s timeout 200s
    > /opt/schily/bin/cdrecord: A write error occured.
    > /opt/schily/bin/cdrecord: Please properly read the error message above.
    > Writing pregap for track 1 at -150
    > write track pad data: error after 0 bytes
    > BFree: 1176 K BSize: 1176 K
    > Starting new track at sector: 0
    > Track 01: 0 of 36 MB written.
    > write track data: error after 0 bytes
    > Writing time: 71.262s
    > Average write speed 37.9x.
    > Fixating...
    > Fixating time: 0.016s
    > /opt/schily/bin/cdrecord: fifo had 64 puts and 1 gets.
    > /opt/schily/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill
    > was 100%.
    >
    > cdrecord comand:
    > - -----------------------
    > /opt/schily/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=4 -dao
    > driveropts=burnfree -eject fs=4m -overburn -useinfo -pad -shorttrack
    > - -audio /tmp/kde-root/k3b_audio_0_01.wav /tmp/kde-root/k3b_audio_0_02.wav /tmp/kde-root/k3b_audio_0_03.wav /tmp/kde-root/k3b_audio_0_04.wav /tmp/kde-root/k3b_audio_0_05.wav /tmp/kde-root/k3b_audio_0_06.wav /tmp/kde-root/k3b_audio_0_07.wav /tmp/kde-root/k3b_audio_0_08.wav /tmp/kde-root/k3b_audio_0_09.wav /tmp/kde-root/k3b_audio_0_10.wav /tmp/kde-root/k3b_audio_0_11.wav
    >
    > -----BEGIN PGP SIGNATURE-----
    > Version: GnuPG v1.2.2 (GNU/Linux)
    >
    > iD8DBQFAa9qH9EKgVX3zIJ4RAqblAJsG2FDB0d5PSpVARi/NFUooVxeSSwCfXHeK
    > Px1VWhNxAmFcMexeNHdKxrs=
    > =Xstl
    > -----END PGP SIGNATURE-----

  • Next message: John Pettigrew: "[SLE] Re: SusE 9.1 Pro FREE??"