[SLE] journalist need some help

• Previous message: Patrick Shanahan: "Re: [SLE] Opera 7"
• In reply to: Tom Corr: "Re: [SLE] Why does USB drive mount automagically?"
• Next in thread: Mike: "Re: [SLE] journalist need some help"
• Reply: Mike: "Re: [SLE] journalist need some help"
• Reply: Marshall Heartley: "Re: [SLE] journalist need some help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: suse-linux-e@suse.com
Date: Sun, 23 May 2004 15:59:25 +0200

HI All,

I am new to this list, and it`s great to have opportunity to participate here.
I have to finish review of SuSE Linux 9.1 Pro for my magazine, but have a
problem with USB function.
Under SuSE 9.0 (I have wrote review too), my Flash disk is mounted something
like this: /media/sda1/ but now mount point is something difficult to
understand.
Under SuSE 9.0, my USB Mass Storage digital camera usually is mounted
like /media/sdb1/ and I was able to access pictures trough Konqueror. When I
connect camera under SuSE 9.0, icon of hard disk appear on desktop, and I
would mount it automaticly opening it. And only I need latter is to unmount.
But now with SuSE 9.1 I have really problem with this same digital still
camera.
When I connect it, I donīt know for a way to access pictures. Obviously, itīs
not mounted, but i canīt find which device is it now. Under SuSE 9.0 it
was /dev/sbd1/ but now I am not sure.
When I connect my USB Flash disk under SuSE 9.1, itīs mounted at point
something like this: /media/usb-storage-004050098390:0:0:p1 but it works OK.
But if I want to mount my USB Mass Storage Camera, how can I find where I
need to mount it? All this numbers....
Anyway, my USB Mass Storage camera worked under SuSE 9.0, but now I donīt know
what to do.
I have tried command hwinfo, and system can see camera, here below is part of
message I have got in terminal:

41: USB 00.0: 10600 Disk
  [Created at usb.120]
  Unique ID: cLrx.pg4fhkNS+GB
  Parent ID: k4bc.Z85BtXc5n8F
  SysFS ID: /devices/pci0000:00/0000:00:04.2/usb1/1-2/1-2:1.0
  SysFS BusID: 1-2:1.0
  Hardware Class: disk
  Model: "Fuji Photo Film USB Mass Storage"
  Hotplug: USB
  Vendor: usb 0x04cb "Fuji Photo Film Co., Ltd."
  Device: usb 0x011a "USB Mass Storage"
  Revision: "10.00"
  Serial ID: "Y-407^^^^^021002XFPX0003003497"
  Driver: "usb-storage"
  Speed: 1.5 Mbps
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #39 (Hub)

42: USB 00.0: 10a00 Hub
  [Created at usb.120]
  Unique ID: pBe4.Kt9mEIPpjQ6
  Parent ID: kmLG.WJLHWSpr11D
  SysFS ID: /devices/pci0000:00/0000:00:04.3/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.4-52-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: "Linux 2.6.4-52-default uhci_hcd"
  Device: "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:04.3"
  Driver: "hub"
  Speed: 1.5 Mbps
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

Please help me if you know how to mount it and access my camera. Anyway, all
other USB hardware I have works very nice, USB Flash disk and external hard
disk. I am very pleased with new SuSE 9.1, but this USB camera problem is big
problem for now, and I need it very much (I am journalist, you know).

Mirko Perak
Belgrade

-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com

• Previous message: Patrick Shanahan: "Re: [SLE] Opera 7"
• In reply to: Tom Corr: "Re: [SLE] Why does USB drive mount automagically?"
• Next in thread: Mike: "Re: [SLE] journalist need some help"
• Reply: Mike: "Re: [SLE] journalist need some help"
• Reply: Marshall Heartley: "Re: [SLE] journalist need some help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]