[SLE] 9.1 Network Problems

From: Lucky Leavell (susemisc_at_UniXpress.com)
Date: 06/02/04

  • Next message: Lucky Leavell: "Re: [SLE] 9.1 Network Problems" 
    Date: Tue, 1 Jun 2004 21:38:36 -0400 (EDT)
To: "[SLE]" <suse-linux-e@suse.com>

    OS: SuSE 9.1
    NIC: AsusTek nForce2

        I have been experiencing two strange problems which may (or may not)
    be related:

            1. Pings to this system from the same [lightly loaded] subnet
               will proceed normally (1/second) and then stop for a few
               seconds before resuming normal rate. Stats indicate 10%
               packet loss.

            2. When I ssh into the system, the session will disconnect with
               message displayed:

                    READ from remote host x.x.x.x: Connection reset by peer

    Any idea what may be causing these problems and what to do about them?

    Thank you,
    Lucky Leavell 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Lucky Leavell: "Re: [SLE] 9.1 Network Problems"

    Relevant Pages

    • Re: [SLE] SuSE 10 Time Changes
      ... On 11/11/05, Lucky Leavell wrote: ... > I have observed a mysterious problem on several SuSE 10.0 Pro systems, ... > namely the clock advancing an hour or so for no apparnt reason. ...
      (SuSE)
    • Holding Shift key and the Beep factor
      ... I feel like a nimnul asking this, as I've been using SUSE since 7.3 was ... Getting a little frustrated as I can't determine what's causing ... I have "use system bell instead of system notifications" on in the KDE ...
      (alt.os.linux.suse)
    • Re: [SLE] Slow 3D with NVidia.
      ... Hash: SHA1 ... glxgears---the only account where I copied almost everything directly ... from SuSE 9.3. ... So, most likely, some setting I copied is causing the ...
      (SuSE)
    • Re: [SLE] Slow 3D with NVidia.
      ... glxgears---the only account where I copied almost everything directly ... from SuSE 9.3. ... So, most likely, some setting I copied is causing the ... Also check the archives at http://lists.suse.com ...
      (SuSE)
    • Re: [SLE] Scanning for hardware hw_random fails to load.
      ... In suse 9.1 there was a problem with dev/null being deleted and causing ... You need to patch it. ...
      (SuSE)