Re: [SLE] 9.1 problem
From: Jerome Lyles (susemail_at_hawaii.rr.com)
Date: 06/15/04
- Previous message: Johan Sch: "Re: [SLE] Antivirus program with SuSE 9.1 ??"
- In reply to: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Next in thread: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Reply: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: suse-linux-e@suse.com Date: Tue, 15 Jun 2004 08:53:04 -1000
On Sunday 13 June 2004 06:23 pm, Carl William Spitzer IV wrote:
> On Sat, 2004-06-12 at 23:45, Jerome Lyles wrote:
> > On Saturday 12 June 2004 03:02 pm, Carl William Spitzer IV wrote:
> > > On Thu, 2004-06-10 at 12:14, Jerome Lyles wrote:
> > > > I have a Belkin 4-port, powered KVM.
> > > >
> > > > On Wednesday 09 June 2004 05:55 pm, Carl William Spitzer IV wrote:
> > > > > Is the KVM powered?
> > > > > Brand?
> > > > > CWSIV
> > > > >
> > > > > On Tue, 2004-06-08 at 13:01, Jerome Lyles wrote:
> > > > > > I have two computers using a 4-way kvm switch to share a monitor
> > > > > > and a usb keyboard and mouse. One machine was upgraded to 9.1
> > > > > > the other is still 9.0.
> > > > > >
> > > > > > The problem is that if I set the switch to an empty channel (no
> > > > > > signal to the monitor then) for longer than about eight hours
> > > > > > overnight) and then go back to the channel the 9.1 is on I get no
> > > > > > keyboard or mouse response. Sometimes I hear the two system beeps
> > > > > > when the usb is initiated sometimes not. I plugged in another
> > > > > > usb keyboard directly into the 9.1 machine-no response. So far
> > > > > > the only way around this is to hit the reset button. Any ideas
> > > > > > on what is happening here?
> > > > > > Thanks,
> > > > > > Jerome
> > >
> > > Sounds like the old ps2 issue which was solved by switching to console
> > > and back to X. But if its a USB KB it could power down when
> > > disconnected and fully discharge. In that case it can not sustain.
> > > BTW is the KVM directly connected to the USB KB or is the KB converted
> > > to ps2?
> > >
> > > CWSIV
> >
> > Yes, the KVM is directly connected to the USB KB. So are you saying the
> > usb mouse and keyboard lose energy over time if not powered by the KVM
> > switch? Thanks,
> > Jerome
>
> Thats what I was told. If its a breif switching then the system just
> looses synchronysm and the switching to console and back to x forces the
> hardware to be recognized. But your using a USB KB not PS2 so the power
> problem could be an issue.
>
> Does google have anything on your make and model of KVM??
>
> CWSIV
Nothing useful.
Jerome
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
- Previous message: Johan Sch: "Re: [SLE] Antivirus program with SuSE 9.1 ??"
- In reply to: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Next in thread: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Reply: Carl William Spitzer IV: "Re: [SLE] 9.1 problem"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|