Re: [SLE] SUSE 9.0 Adding a psuedo usb hardrive

From: Adolph & Sharon Weidanz (timeto.paws_at_verizon.net)
Date: 07/16/04

  • Next message: Jack Malone: "Re: [SLE] Remote Administration" 
    Date: Fri, 16 Jul 2004 13:15:13 -0700

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Ken Schneider wrote:
    | On Fri, 2004-07-16 at 15:56, Adolph & Sharon Weidanz wrote:
    |
    |
    | That won't work because sda would be the entire disk -not- a partition.
    | You can only mount partitions.
    |
    | What does dmesg show after plugging in the drive?
    |
    | Also what does the last line of my signature say!

    Sorry hit the reply instead of reply all...

    from the last part of dmesg:

    nitializing USB Mass Storage driver...
    usb.c: registered new driver usb-storage
    scsi1 : SCSI emulation for USB Mass Storage devices
    ~ Vendor: Model: Rev:
    ~ Type: Direct-Access ANSI SCSI revision: 02
    WARNING: USB Mass Storage data integrity not assured
    USB Mass Storage device found at 2
    USB Mass Storage support registered.
    Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
    SCSI device sda: 1541017267 512-byte hdwr sectors (789001 MB)
    ~ sda:SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 0
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 1
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 2
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 3
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 4
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 5
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 6
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 7
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 0
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 1
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 2
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 3
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 4
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 5
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 6
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000000
    Current sd08:00: sense key None
    ~ I/O error: dev 08:00, sector 7
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    hub.c: USB device not accepting new address (error=-71)
    usb-storage: host_reset() requested but not implemented
    scsi: device set offline - command error recover failed: host 1 channel
    0 id 0 lun 0
    SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 6050000
    ~ I/O error: dev 08:00, sector 1541017264
    ~ I/O error: dev 08:00, sector 1541017265
    ~ I/O error: dev 08:00, sector 1541017264
    ~ I/O error: dev 08:00, sector 0
    ~ I/O error: dev 08:00, sector 0
    ~ unable to read partition table
    usb.c: USB disconnect on device 00:02.2-2 address 2
    hub.c: new USB device 00:02.2-2, assigned address 3
    usb.c: USB device not accepting new address=3 (error=-71)
    hub.c: new USB device 00:02.2-2, assigned address 4
    WARNING: USB Mass Storage data integrity not assured
    USB Mass Storage device found at 4
    usb.c: USB disconnect on device 00:02.2-2 address 4
    hub.c: new USB device 00:02.2-2, assigned address 5
    usb.c: USB device not accepting new address=5 (error=-71)
    hub.c: new USB device 00:02.2-2, assigned address 6
    WARNING: USB Mass Storage data integrity not assured
    USB Mass Storage device found at 6
    usb.c: USB disconnect on device 00:02.2-2 address 6
    hub.c: new USB device 00:02.2-2, assigned address 7
    usb.c: USB device not accepting new address=7 (error=-71)
    hub.c: new USB device 00:02.2-2, assigned address 8
    usb.c: USB device not accepting new address=8 (error=-71)
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    lp0: using parport0 (polling).
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    parport0: irq 7 detected
    Non-volatile memory driver v1.2
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    lp0: using parport0 (polling).
    ppa: Version 2.07 (for Linux 2.4.x)
    WARNING - no ppa compatible devices found.
    ~ As of 31/Aug/1998 Iomega started shipping parallel
    ~ port ZIP drives with a different interface which is
    ~ supported by the imm (ZIP Plus) driver. If the
    ~ cable is marked with "AutoDetect", this is what has
    ~ happened.
    end_request: I/O error, dev 02:00 (floppy), sector 0
    end_request: I/O error, dev 02:00 (floppy), sector 0
    end_request: I/O error, dev 02:00 (floppy), sector 0
    end_request: I/O error, dev 02:00 (floppy), sector 0

    - --
    Adolph & Sharon Weidanz
    '78 43' Endeavour Ketch
    S/V Time To Paws
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.2.2 (GNU/Linux)

    iD8DBQFA+DdRlC+PSm9+eB0RAnjYAKCjkPS00zDYBGWHSYjRw5Upf6GEUwCeN0aY
    lyMgWhTvOG25xFOfUcTb+co=
    =XqUP
    -----END PGP SIGNATURE----- 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Jack Malone: "Re: [SLE] Remote Administration"

    Relevant Pages