[SLE] scsi_mod, sd_mod

From: Andre Krois (andre.krois_at_rkweb.de)
Date: 07/30/04

  • Next message: Chadley Wilson: "[SLE] Day one so much to learn? TVcards cx88xx cx8811" 
    To: suse-linux-e@suse.com
Date: Fri, 30 Jul 2004 16:47:07 +0200

    Hi
    I recently bought a cardreader which can, or should be used by mounting
    the single cards via scsi.
    My problem is that I canīt load the scsi_mod and sd_mod modules, so where
    can I get these modules from?

    thanks in advance
    Andre 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Chadley Wilson: "[SLE] Day one so much to learn? TVcards cx88xx cx8811"

    Relevant Pages

    • Is this possible
      ... drivers on the hardware types. ... S3s which come with a proprietary scsi raid controller for the hard ... We load the image and when we reboot the machine the setup will ... If I am not mistaken when you sysprep your 'master' ...
      (microsoft.public.windowsxp.setup_deployment)
    • Re: Another bit from The Lab: Burning CD / DVD with 9556
      ... breaks down under the load of its operating system. ... NCR 3350 could both manage 8X burns speaks very well for the ... The PS/2 did feel much more responsive during the burn. ... the PS/2 where the NCR was using onboard 53C94 SCSI for everything. ...
      (comp.sys.ibm.ps2.hardware)
    • Re: lsi/ncr scsi & 9.2
      ... > nice feature & I thought all scsi controllers have them now. ... Acard and disable all my ide stuff. ... extraction rate was always higher on the same drives as soon as I took them ... extraction on a six year old Pioneer slot load cd-rom as soon as I bridged ...
      (alt.os.linux.suse)
    • Re: Iomega Zip Drive in SuSe 9.0
      ... Is this an IDE or SCSI ZIP drive? ... the Yast loader, but it doesn't load when the system boots. ... Cables are tights, I checked that first. ...
      (comp.os.linux.hardware)
    • Re: adding SCSI to an IDE system?
      ... PG>>> a new SCSI card and drive? ... PG>>Load a driver for the card. ... kernels) or put the modules in an initial ramdisk and have this ramdisk ... If you have more then one kernel installed, it is generally a good idea ...
      (comp.os.linux.misc)