Re: [SLE] Error installing IPTables::IPv4 - SOLVED

From: Christian Bjørnbak (cb_at_touristonline.dk)
Date: 10/06/04

  • Next message: Gary: "[SLE] new v9.2 is out" 
    Date: Wed, 06 Oct 2004 16:39:17 +0200
To: suse-linux-e@suse.com

    Hi

    I solved it myself...

    After removing the kernel-source.rpm it compiled without glitches!!

    /Christian

    Christian Bjørnbak wrote:

    > Hi
    >
    > I trying to install the cpan perl module IPTables::IPv4, but I get the
    > following compile error:
    >
    > /usr/src/linux/include/net/protocol.h:63: error: field `list' has
    > incomplete type
    >
    > Can anyone help me? Or know were to find the module as a rpm?
    >
    > I have SuSE 9.1 with kernel-default and kernel-source 2.6.5-7.108.
    >
    > A shorted trace of the error is included below:
    >
    > cpan -i IPTables::IPv4
    > We have to reconfigure CPAN.pm due to following uninitialized parameters:
    >
    > cpan_home, keep_source_where, build_dir, build_cache, scan_cache,
    > index_expire, gzip, tar, unzip, make, pager, makepl_arg, make_arg,
    > make_install_arg, urllist, inhibit_startup_message, ftp_proxy,
    > http_proxy, no_proxy, prerequisites_policy, cache_metadata
    >
    > /home/cb/.cpan/CPAN/MyConfig.pm initialized.
    >
    >
    > CPAN is the world-wide archive of perl resources. It consists of about
    > 100 sites that all replicate the same contents all around the globe.
    > Many countries have at least one CPAN site already. The resources
    > found on CPAN are easily accessible with the CPAN.pm module. If you
    > want to use CPAN.pm, you have to configure it properly.
    >
    > If you do not want to enter a dialog now, you can answer 'no' to this
    > question and I'll try to autoconfigure. (Note: you can revisit this
    > dialog anytime later by typing 'o conf init' at the cpan prompt.)
    >
    > Are you ready for manual configuration? [yes] no
    >
    > ...
    >
    > commit: wrote /home/cb/.cpan/CPAN/MyConfig.pm
    > CPAN: Storable loaded ok
    > CPAN: LWP::UserAgent loaded ok
    > Fetching with LWP:
    >
    > ...
    >
    > Checksum for
    > /home/cb/.cpan/sources/authors/id/D/DP/DPATES/IPTables-IPv4-0.98.tar.gz
    > ok
    > Scanning cache /home/cb/.cpan/build for sizes
    > IPTables-IPv4-0.98/
    > IPTables-IPv4-0.98/t/
    > IPTables-IPv4-0.98/t/56speed.t
    > IPTables-IPv4-0.98/t/07flush.t
    >
    > ...
    >
    > IPTables-IPv4-0.98/unpacker.h
    > IPTables-IPv4-0.98/packer.c
    > IPTables-IPv4-0.98/module_iface.h
    > IPTables-IPv4-0.98/loader.h
    >
    > CPAN.pm: Going to build D/DP/DPATES/IPTables-IPv4-0.98.tar.gz
    >
    > Checking if your kit is complete...
    > Looks good
    > Writing Makefile for IPTables::IPv4
    > cp IPv4/TableTie.pm blib/lib/IPTables/IPv4/TableTie.pm
    > cp IPv4/Chain.pm blib/lib/IPTables/IPv4/Chain.pm
    > cp IPv4.pm blib/lib/IPTables/IPv4.pm
    > AutoSplitting blib/lib/IPTables/IPv4.pm (blib/lib/auto/IPTables/IPv4)
    > cp IPv6.pm blib/lib/IPTables/IPv6.pm
    > AutoSplitting blib/lib/IPTables/IPv6.pm (blib/lib/auto/IPTables/IPv6)
    > cp IPv4/Toplevel.pm blib/lib/IPTables/IPv4/Toplevel.pm
    > cp IPv4/Rule.pm blib/lib/IPTables/IPv4/Rule.pm
    > cp IPv4/RuleList.pm blib/lib/IPTables/IPv4/RuleList.pm
    > /usr/bin/perl /usr/lib/perl5/5.8.3/ExtUtils/xsubpp -noprototypes
    > -typemap /usr/lib/perl5/5.8.3/ExtUtils/typemap -typemap
    > IPTables.typemap IPv4.xs > IPv4.xsc && mv IPv4.xsc IPv4.c
    > cc -c -Iinclude -I/usr/src/linux/include -Wall
    > -DMODULE_PATH=\"/usr/lib/IPTables-IPv4\" -O2 -march=i586 -mcpu=i686
    > -fmessage-length=0 -Wall -Wall -pipe -DVERSION=\"0.98\"
    > -DXS_VERSION=\"0.98\" -fPIC
    > "-I/usr/lib/perl5/5.8.3/i586-linux-thread-multi/CORE" IPv4.c
    > In file included from /usr/src/linux/include/linux/netdevice.h:28,
    > from /usr/src/linux/include/linux/netfilter_ipv4.h:10,
    > from
    > /usr/src/linux/include/linux/netfilter_ipv4/ip_tables.h:25,
    > from include/libiptc/libiptc.h:6,
    > from IPv4.xs:28:
    > /usr/src/linux/include/linux/if.h:25:1: warning: "IFNAMSIZ" redefined
    > In file included from include/libiptc/ipt_kernel_headers.h:14,
    >
    > ...
    >
    > /usr/src/linux/include/linux/ipv6.h:19: error: redefinition of `struct
    > in6_pktinfo'
    > In file included from /usr/src/linux/include/linux/netfilter_ipv4.h:11,
    > from
    > /usr/src/linux/include/linux/netfilter_ipv4/ip_tables.h:25,
    > from include/libiptc/libiptc.h:6,
    > from IPv4.xs:28:
    > /usr/src/linux/include/net/protocol.h:39: warning: `struct sk_buff'
    > declared inside parameter list
    > /usr/src/linux/include/net/protocol.h:39: warning: its scope is only
    > this definition or declaration, which is probably not what you want
    > /usr/src/linux/include/net/protocol.h:40: error: parse error before "u32"
    > /usr/src/linux/include/net/protocol.h:40: warning: `struct sk_buff'
    > declared inside parameter list
    > /usr/src/linux/include/net/protocol.h:48: warning: `struct sk_buff'
    > declared inside parameter list
    > /usr/src/linux/include/net/protocol.h:53: warning: `struct
    > inet6_skb_parm' declared inside parameter list
    > /usr/src/linux/include/net/protocol.h:53: warning: `struct sk_buff'
    > declared inside parameter list
    > /usr/src/linux/include/net/protocol.h:63: error: field `list' has
    > incomplete type
    > IPv4.xs: In function `XS_IPTables__IPv4__Table_set_policy':
    > IPv4.xs:329: warning: dereferencing type-punned pointer will break
    > strict-aliasing rules
    > make: *** [IPv4.o] Error 1
    > /usr/bin/make -- NOT OK
    > Running make test
    > Can't test without successful make
    > Running make install
    > make had returned bad status, install seems impossible
    >
    >
    > 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Gary: "[SLE] new v9.2 is out"

    Relevant Pages

    • [SLE] Error installing IPTables::IPv4
      ... I trying to install the cpan perl module IPTables::IPv4, ... CPAN is the world-wide archive of perl resources. ... this definition or declaration, which is probably not what you want ...
      (SuSE)
    • Re: More proof of errors going uncorrected among the "regs"
      ... of the translation unit, with an initializer equal to 0. ... enough to show that an object may be declared with an incomplete type. ... we have a declaration of an object with incomplete type. ... struct reg; ...
      (comp.lang.c)
    • unable to upgrade to 7.1-PRE
      ... its scope is only this definition or declaration, ... dereferencing pointer to incomplete type ... warning: ...
      (freebsd-stable)
    • Re: auto_ptr compile error
      ... Do you mean move definition of ~Ownerbefore full declaration of Thing or after full declaration of Thing? ... I do not think the error has something to do with destructor of ~Owner() as you mentioned, ... There seems general agreement that "deletion of incomplete type" should be an error, rather than a warning, because it can lead to memory leaks. ...
      (microsoft.public.vc.language)
    • Re: [PATCH] x86: usb debug port early console v2
      ... +#ifndef EARLY_PRINTK ... 'iaa_watchdog' has incomplete type ... scope is only this definition or declaration, ... dereferencing pointer to incomplete type ...
      (Linux-Kernel)
    Loading