[SLE] ServerRAID driver version number in SUSE kernel (Suse 9.1 Pro)

From: Christophe Sahut (csahut_at_lynuxsolutions.com)
Date: 11/30/04

  • Next message: Ben Higginbottom: "Re: [SLE] 21/22 inch monitor recommendation / brickbats" 
    Date: Tue, 30 Nov 2004 16:38:47 +0100
To: suse-linux-e@suse.com

    Hello all,

    I have this config :

    PRODUCT: SuSE Linux I386 9.1 Professional
    Hardware :
    Ibm xSeries 235
    Bios version : 7.10.18
    Hardrive : IBM 32P0731 (6 disks, 2 with raid 1 and 3 with raid 5) with
    hardware raid controller ( IBM ServeRAID-6M firmware version : 7.10.18)

    I get this error in my logs :

    ----------- Error : --------------------
    Nov 22 12:32:16 dumbo kernel: Symbols match kernel version 2.6.5.
    Nov 22 12:32:16 dumbo kernel: No module symbols loaded - kernel modules
    not enabled.
                         Nov 22 12:37:16 dumbo kernel: mptscsih: ioc0: >>
    Attempting task abort! (sc=c5731380)
                                                Nov 22 12:37:16 dumbo
    kernel: mptscsih: ioc0: >> Attempting target reset! (sc=c5731380)
     
    Nov 22 12:37:16 dumbo kernel: mptscsih: ioc0: >> Attempting bus reset!
    (sc=c5731380)
                          Nov 22 12:37:26 dumbo kernel: mptscsih: ioc0: >>
    Attempting host reset! (sc=c5731380)
                                                Nov 22 12:37:26 dumbo
    kernel: mptbase: Initiating ioc0 recovery Nov 22
    12:39:50 dumbo kernel: SCSI Error: (0:0:0) Status=02h (CHECK CONDITION)
    Nov 22 12:39:50 dumbo kernel: Key=8h (BLANK CHECK); FRU=00h
    Nov 22 12:39:50 dumbo kernel: ASC/ASCQ=00h/05h ""
               Nov 22 12:39:50 dumbo kernel: CDB: 08 01 00 00 01 00 -
    "READ(6)" Nov 22 12:39:50 dumbo kernel:
                                         Nov 22 12:57:50 dumbo -- MARK --
                                                    Nov 22 12:59:00 dumbo
    /USR/SBIN/CRON[8842]: (root) CMD ( rm -f
    /var/spool/cron/lastrun/cron.hourly)

    --- End of error ----------

    I think I have a problem because the firmware version of the RAID
    controller is newer than the version of the driver of the kernel. How
    can I check which version of the serverraid driver is in the kernel ?
    Should I wait for the next kernel upgrade ?

      The IBM tool told me that versions mismatch. I don't know if it is the
    cause of the scsi errors but it could be.

      Someone has any hint about this ?

    Thank you 

    -- 
Christophe
-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Ben Higginbottom: "Re: [SLE] 21/22 inch monitor recommendation / brickbats"

    Relevant Pages