[SLE] Routing issues with eth1(internal) & eth2(external)
From: Mark A. Taff (marktaff_at_comcast.net)
Date: 05/18/05
- Previous message: Mark A. Taff: "[SLE] OT: Test message"
- Next in thread: Merton Campbell Crockett: "Re: [SLE] Routing issues with eth1(internal) & eth2(external)"
- Reply: Merton Campbell Crockett: "Re: [SLE] Routing issues with eth1(internal) & eth2(external)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: suse-linux-e@suse.com Date: Tue, 17 May 2005 22:23:54 -0700
All,
I sure hope someone can enlighten me. I am having a weird routing
issue.
Everything works OK, except I can't access the the external interface from a
machine on my internal network.
See network map pdf at http://www.marktaff.com/network.map.pdf
See output of `ifconfig` and `route` below.
From any internal (192.168...) machine, I can't ping/ssh liberty1-ext, but I
can ping/ssh to liberty1-int.
From each internal machine, I can reach all the other internal machines, and
the router's external ip, but not liberty1's external ip.
From outside my private network, I can ping/ssh liberty1-ext just fine.
I want to be able to access the machine via liberty1-ext both at home and
while traveling, yet still be able to access the private network from
liberty1 via liberty1-int interface.
Could the problem be my hub? Do I need to replace it with a switch, or
perhaps a separate router? Seems like the hub should work?
Thanks for all your help.
-- Mark A. Taff +++++++++++++++++++++++++++++++++++++++ liberty1:~ # ifconfig eth1 Link encap:Ethernet HWaddr 00:0F:B5:44:34:B3 inet addr:192.168.0.111 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20f:b5ff:fe44:34b3/64 Scope:Link UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:197992 errors:0 dropped:0 overruns:0 frame:0 TX packets:13195 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:63024816 (60.1 Mb) TX bytes:2299455 (2.1 Mb) Interrupt:11 Base address:0x8000 eth2 Link encap:Ethernet HWaddr 00:00:C5:B3:6D:63 inet addr:24.16.122.35 Bcast:255.255.255.255 Mask:255.255.240.0 inet6 addr: fe80::200:c5ff:feb3:6d63/64 Scope:Link UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8708383 errors:0 dropped:0 overruns:0 frame:0 TX packets:48430 errors:0 dropped:0 overruns:0 carrier:0 collisions:8845 txqueuelen:1000 RX bytes:1003929910 (957.4 Mb) TX bytes:6020982 (5.7 Mb) Interrupt:10 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2273 errors:0 dropped:0 overruns:0 frame:0 TX packets:2273 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:879444 (858.8 Kb) TX bytes:879444 (858.8 Kb) ++++++++++++++++++++++++++++++++++++++++++++++ liberty1:~ # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 c-24-16-112-0.h * 255.255.240.0 U 0 0 0 eth2 link-local * 255.255.0.0 U 0 0 0 eth1 loopback * 255.0.0.0 U 0 0 0 lo default c-24-16-112-1.h 0.0.0.0 UG 0 0 0 eth2 -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
- Previous message: Mark A. Taff: "[SLE] OT: Test message"
- Next in thread: Merton Campbell Crockett: "Re: [SLE] Routing issues with eth1(internal) & eth2(external)"
- Reply: Merton Campbell Crockett: "Re: [SLE] Routing issues with eth1(internal) & eth2(external)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]