[SLE] Dual head on an ATI9600 and SuSE9.3???

From: Clayton (smaug42_at_gmail.com)
Date: 05/25/05

  • Next message: Sunny: "Re: [SLE] dvdrip"
    Date: Wed, 25 May 2005 16:04:21 +0200
    To: suse-linux-e@suse.com
    
    

    Has anyone managed to get dualhead working with SuSE9.3 using an ATI
    9600 video card?

    I've been fighting with it for a while now... and not getting anywhere.

    System config:
    AMDx64 3000+
    ATI9600 video (Identified as RV350 AS)

    I've installed the fglrx drive and the kernel modules as the
    intructions say on the SuSE ftp site. I've got the fglrx driver
    working with one monitor just fine. When I try to setup dual monitor
    it fails miserably. It tries to start X and fails... back to the
    command line.

    I'm out of ideas.... does anyone have any suggestions... or pointers
    for getting this working?

    Extra info..............

    startx as user tries to start up X, but errors out with:

    Fatal server error:
    __glExtensionInit: AddExtensions failed

    Sometimes (depending on what options I enable in xorg.conf) I also get
    a bunch of unresolved symbol errors just before the AddExtensions
    failed error... something like this:

    Symbol firegl_AllocCache from module
    /usr/X11R6/lib64/modules/drivers/fglrx_drv.o is unresolved

    lspci gives me:
    -------------
    0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS
    [Radeon 9600 AS] (prog-if 00 [VGA])
            Subsystem: Micro-Star International Co., Ltd.: Unknown device 9516
            Flags: bus master, 66Mhz, medium devsel, latency 255, IRQ 209
            Memory at b0000000 (32-bit, prefetchable) [size=256M]
            I/O ports at a800 [size=256]
            Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
            Expansion ROM at cfec0000 [disabled] [size=128K]
            Capabilities: [58] AGP version 3.0
            Capabilities: [50] Power Management version 2

    0000:01:00.1 Display controller: ATI Technologies Inc RV350 ?? [Radeon
    9550] (Secondary)
            Subsystem: Micro-Star International Co., Ltd.: Unknown device 9517
            Flags: bus master, 66Mhz, medium devsel, latency 32
            Memory at a0000000 (32-bit, prefetchable) [size=256M]
            Memory at cfee0000 (32-bit, non-prefetchable) [size=64K]
            Capabilities: [50] Power Management version 2
    -------------------

    In my xorg.conf file I've duplicated my settings for screen[0] (from
    my working xorg.conf file) and changed as necessary to add a screen[1]

    The relevant parts look like this:
    --------------------
    Section "Monitor"
      DisplaySize 340 270
      HorizSync 31-48
      Identifier "Monitor[0]"
      ModelName "SYNCMASTER 4S"
      Option "DPMS"
      VendorName "SAMSUNG"
      VertRefresh 43-75
      UseModes "Modes[0]"
    EndSection

    Section "Monitor"
      DisplaySize 340 270
      HorizSync 31-48
      Identifier "Monitor[1]"
      ModelName "SYNCMASTER 4S"
      Option "DPMS"
      VendorName "SAMSUNG"
      VertRefresh 43-75
      UseModes "Modes[1]"
    EndSection

    Section "Modes"
      Identifier "Modes[0]"
      Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
    EndSection

    Section "Modes"
      Identifier "Modes[1]"
      Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
    EndSection

    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth 24
        Modes "1280x1024"
      EndSubSection
      Device "Device[0]"
      Identifier "Screen[0]"
      Monitor "Monitor[0]"
    EndSection

    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth 24
        Modes "1280x1024"
      EndSubSection
      Device "Device[1]"
      Identifier "Screen[1]"
      Monitor "Monitor[1]"
    EndSection

    Section "Device"
      BoardName "RV350 AS"
      BusID "PCI:1:0:0"
      Driver "fglrx"
      Identifier "Device[0]"
      Option "MonitorLayout" "DVI, CRT"
    # Option "no_dri" "yes"
      Screen 0
      VendorName "ATI"
    EndSection

    Section "Device"
      BoardName "RV350"
      BusID "PCI:1:0:0"
      Driver "fglrx"
      Identifier "Device[1]"
      Screen 1
      VendorName "ATI"
    EndSection

    Section "ServerLayout"
      Identifier "Layout[all]"
      InputDevice "Keyboard[0]" "CoreKeyboard"
      InputDevice "Mouse[1]" "CorePointer"
      Option "Clone" "off"
    # Option "Xinerama" "on
      Screen "Screen[0]"
      Screen "Screen[1]" RightOf "Screen[0]"
    EndSection
    ----------------------

    -- 
    Check the headers for your unsubscription address
    For additional commands send e-mail to suse-linux-e-help@suse.com
    Also check the archives at http://lists.suse.com
    Please read the FAQs: suse-linux-e-faq@suse.com
    

  • Next message: Sunny: "Re: [SLE] dvdrip"

    Relevant Pages

    • Xorg-6.8.1 / ATI & DDC function
      ... try to correct a seemingly malfunction with ATI ... video card and the set modules. ... monitor frequencies. ... know how the driver and the video produce this difference. ...
      (freebsd-questions)
    • Re: Maya on 2 Monitors w/different Resolutions - Window height problem
      ... I have a laptop that I sometimes connect to an LCD ... monitor in the span mode. ... like a solution for nvidia geforce users, my laptop has "ATI MOBILITY ... X600 is not actually a certified Maya video card which could be your basic ...
      (comp.graphics.apps.alias)
    • UPDATE: Time for a New Video Card?
      ... Does this 'clue' suggest to anyone what the root cause of the problem is? ... I'm fairly confident it's not the monitor, since I had this with my previous ... I'm thinking I need to replace the video card. ... then reinstall the current ATI driver? ...
      (microsoft.public.windowsxp.perform_maintain)
    • Re: Multiple monitors
      ... I have an ATI 9800 Pro All-In-Wonder that I was splitting the video signal ... and an aditional ATI 9250 PCI video card that supports both VGA and DVI ... 9800 DVI connection ... But that is the monitor that sits off to my left. ...
      (microsoft.public.windowsxp.general)
    • Online Gaming - system upgrade? Or is my internet speed the proble
      ... reluctant to as we just bought a new PC last year, ... It only has a PCI slot for video card upgrade, ... old cheap VGA monitor, ... the guy didn't even know what an AGP slot was! ...
      (microsoft.public.windowsxp.hardware)