[SLE] raid sync question

From: Richard Bos (radoeka_at_xs4all.nl)
Date: 06/25/05

  • Next message: Mike McMullin: "Re: [SLE] linux firewall or SUSE" 
    To: suse-linux-e@suse.com
Date: Sat, 25 Jun 2005 23:38:57 +0200

    I played to day a little with my raid setup, by moving 1 of the raid disks
    from /dev/hdb to /dev/hdc. I expected that I should reconfigure my raid
    configuration, but somehow the system picked the change and started
    to /dev/hdc[123] automatically. Very convenient, but how does the system
    know that hdb had been moved to hdc and that the raid is now composed of hda
    and hdc?? 

    -- 
Richard Bos
Without a home the journey is endless
-- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Mike McMullin: "Re: [SLE] linux firewall or SUSE"

    Relevant Pages

    • Re: RAID tail of woe :(
      ... In a nutshell I have Parallel ATA HDD on hda and hdc directly of off my ... motherboard running software raid 1 - it works like a dream and I am very ... Could you clarify if this is fakeraid or if this is the MD RAID system ... a hardware RAID controller will not help you ...
      (Ubuntu)
    • Re: RAID failure
      ... I disconnected hda, leaving hdc ... > good that you can boot off hdc ... ... Then copy the data off your RAID machine completely before ...
      (Debian-User)
    • raid possible with different sized hds?
      ... I would also like to use LVM on raid in the process. ... md0 for boot en md1 for the rest ... So do i first try to boot from hdc and if that works ... the relevant lvm paritions on the same disk. ...
      (Debian-User)
    • Re: Back up of hard drive with dd
      ... hdc that I would like to back it up to. ... Then the most elegant way is to use "RAID "! ... No Windows, no Gates - but Apache inside! ...
      (alt.os.linux.suse)
    • Re: [SLE] raid sync question
      ... > the system know that hdb had been moved to hdc and that the raid is now ... I think that when the drives are ... first accessed, it reads the partition data of all drives, and, if it ...
      (SuSE)