Re: [SLE] Medion TFT Monitor MD30399 / Graphics card NVIDIA GeForce 6610XL hardware combination

From: Roy Leembruggen (rclemb_at_quicknet.nl)
Date: 10/16/05

  • Next message: Walt Frampus: "Re: [SLE] Watching DVD on SuSE 10" 
    To: "SusE Linux-e" <suse-linux-e@suse.com>
Date: Sun, 16 Oct 2005 21:10:31 +0200

    Thanks for the tip Graham, managed to get the monitor driver in exactly as
    you outlined. However the driver for the NVIDIA GeForce 6610XL graphics
    card remains a problem. Recommended settings are 1280 x 1024, H Freq 63.98
    KXz, V Freq 60.02 Hz. Without the card driver Sax2 will not accept that and
    I am still stuck with the VESA FrameBuffer driver for the graphics card and
    1024 x 768. ( My PC does not have a floppy drive but the USB stick
    substitution worked.).

    Roy

    ----- Original Message -----
    From: "Graham Smith" <gqs@westnet.com.au>
    To: <suse-linux-e@suse.com>
    Sent: Saturday, October 15, 2005 10:55 PM
    Subject: Re: [SLE] Medion TFT Monitor MD30399 / Graphics card NVIDIA GeForce
    6610XL hardware combination

    > On Sun, 16 Oct 2005 06:36, Roy Leembruggen wrote:
    >> Having installed SuSE Linux Prof. ver 9.1 a few days ago and downloaded
    >> all
    >> updates, all hardware was detected correctly except for my Monitor /
    >> Graphics card combination as above. The VESA FrameBuffer driver was
    >> installed by default. There was a choice of two Medion Monitor models,
    >> neither matching MD30399. So I just entered correct V-Sync and H-sync
    >> figures as per the manual. While the display is satisfactory, enhanced
    >> features are absent.
    >>
    >> Since I will be shortly installing the latest SuSE Linux Version 10 I
    >> expect this problem to repeat.
    >>
    >> Please could any one help ?
    >>
    >> Roy
    >
    > If it came with a disk you are in luck.
    >
    > Locate the .inf file and copy it the root of a floppy (No
    > sub-directories).
    >
    > I'm relying on my memory here so be warned.
    >
    > yast ---> Hardware --> Graphics Card & Monitor ---> Desktop Settings -
    > Press the CHANGE button
    >
    > Sax2 --> Monitor --> Properties -> Manufactures Disk
    >
    > Please make sure that the disk is inserted but not mounted.
    >
    > Press OK and if the drivers are OK the config settings will be added to
    > the
    > Monitor Database.
    > --
    > Regards,
    >
    > Graham Smith
    >
    > --
    > Check the headers for your unsubscription address
    > For additional commands send e-mail to suse-linux-e-help@suse.com
    > Also check the archives at http://lists.suse.com
    > Please read the FAQs: suse-linux-e-faq@suse.com
    >
    >
    > 

    -- 
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@suse.com
  • Next message: Walt Frampus: "Re: [SLE] Watching DVD on SuSE 10"
    Loading