Re: [SLE] Hauppauge PVR 350
From: John Andersen (jsa_at_pen.homeip.net)
Date: 11/30/05
- Previous message: Hani: "Re: [SLE] Hauppauge PVR 350"
- In reply to: Hani: "Re: [SLE] Hauppauge PVR 350"
- Next in thread: Hani: "Re: [SLE] Hauppauge PVR 350"
- Reply: Hani: "Re: [SLE] Hauppauge PVR 350"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: suse-linux-e@suse.com Date: Tue, 29 Nov 2005 21:02:21 -0900
On Tuesday 29 November 2005 08:55 pm, Hani wrote:
> On Tuesday 29 November 2005 02:23, John Andersen wrote:
> > You can not configure that card with yast. Yast does not
> > know how to install the firmware, you have to do that
> > your self. All yast sees is the pci info from the bus.
> >
> > You have to copy the firmware to /lib/firmware/ivtv-fw-dec.bin
> > and /lib/firmware/ivtv-fw-enc.bin (one for decodeing one
> > for encodeing). You get these out of the windows drivers
> > with a utility which you can find here:
> > http://ivtvdriver.org/index.php/Firmware
>
> I followed the instructions on the above link and there was no change.
> Although the instructions said to copy the firmware into /lib/modules, that
> did not make any difference.
> However, I noticed that you said to copy the firmware to /lib/firmware, so
> I did and there was some progress. This time after clicking scan the
> channels, I get the following:
> ioctl: VIDIOC_QUERYMENU(id=134217728;index=1;name="44.1 kHz";reserved=88):
> Invalid argument
> ioctl: VIDIOC_QUERYMENU(id=134217731;index=1;name="Stereo";reserved=88):
> Invalid argument
> ioctl: VIDIOC_QUERYMENU(id=134217733;index=1;name="None";reserved=88):
> Invalid argument
> ioctl: VIDIOC_QUERYMENU(id=134217735;index=1;name="Copyright
> off";reserved=88): Invalid argument
> invalid value for input: television
> valid choices for "input": "Composite 0", "Composite 1", "Composite 2",
> "Composite 3", "Tuner 0", "Composite 4", "S-Video 0", "S-Video 1", "S-Video
> 2", "S-Video 3"
> 1 ( 73.25 MHz): No station
> 2 ( 55.25 MHz): No station
> 3 ( 61.25 MHz): No station
> 4 ( 67.25 MHz): No station
> 5 ( 77.25 MHz): No station
> 6 ( 83.25 MHz): No station
> 7 (175.25 MHz): No station
> 8 (181.25 MHz): No station
> 9 (187.25 MHz): No station
> 10 (193.25 MHz): No station
What package (software) are you using when you click these controls?
You want Tuner 0 as your input for that card.
The only software I have used that card with is mythtv
so I may not be able to help. But at least it sounds like its
loading the card right.
Oh, and /lib/firmware/ is the proper place for the firmware
on SuSE.
-- _____________________________________ John Andersen
- application/pgp-signature attachment: signature
- Previous message: Hani: "Re: [SLE] Hauppauge PVR 350"
- In reply to: Hani: "Re: [SLE] Hauppauge PVR 350"
- Next in thread: Hani: "Re: [SLE] Hauppauge PVR 350"
- Reply: Hani: "Re: [SLE] Hauppauge PVR 350"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
