Re: [SLE] Cannot copy (non-)encrypted DVD
- From: "LLLActive@xxxxxxx" <LLLActive@xxxxxxx>
- Date: Mon, 19 Dec 2005 11:40:29 +0100
On Sun, 2005-12-18 at 17:31 -0500, Bruce Marshall wrote:
> On Sunday 18 December 2005 05:22 pm, LLLActive@xxxxxxx wrote:
> > Hi all,
> >
> > --- 2 Problems with K3b on Novell SuSE 10.0 Boxed version ---
> >
> > ***************
> >
>
> Ok, this is the second time you have posted this.
>
Your right, I had some problems with the mails to the list using my
GMail account. I'm using another e-mail account now.
> I asked you some simple questions earlier to which I have not seen the
> answers.
>
> You help us... we'll try to help you.
>
>
I can't find your answer, got muddled up with my changing e-mail
addresses I think.
Svetoslav Milenov (Sunny) answered on the old mail address. But since
his answer, some other problems occurred and I put them both in a new
thread (thought the old one didn't work).
>
> > :: Problem 1 :: Cannot copy encrypted DVD
> >
> > I have created a Data DVD 4,7 GB with only data files. It is a DVD-RW.
> > Now I
> > wan't to copy the DVD to a normal DVD-R 4,7 GB. In K3b the error "Found
> > encrypted DVD. Cannot copy encrypted DVDs" occurs.
> >
> > Debugging output of K3b:
> >
> > System
> > -----------------------
> > K3b Version: 0.12
> >
> > KDE Version: 3.4.2 Level "b"
> > QT Version: 3.3.4
> > Kernel: 2.6.13-15.7-default
> > Devices
> > -----------------------
> > TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW;
> > CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R
> > Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD
> > +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16;
> > RAW/R96P; RAW/R96R; Restricted Overwrite]
> >
> > HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM;
> > DVD-ROM] [DVD-ROM; CD-ROM] [None]
> >
> > I'm sure it is not a encrypted! Where do I look for the solution?
To answer Sunny:
On Sun, 2005-12-18 at 16:41 -0600, Sunny wrote:
>
> Are you really really sure you have the DVD-RW in the reader and a new
> blank media in the writer? :)
I cleaned the DVD-RW with "Tools - Format DVD+-RW". It worked.
The first time I burned this DVD-RW it worked, but I had SuSE 9.3 then.
>
> Also, are you sure that your reader can read DVD-RW? I have some
> devices (old) which can not read DVD+ or - RW, while they are OK with
> DVD+/-R. Just have problems with rewritables. To check this, try to
> copy some files from that drive/disk to your HDD.
>
It copied OK to the HDD. If you check the debug output,
the TEAC DV-W50D 1.05 claims it can write DVD-RW and DVD+RW.
It also did it before. It seems not to be a problem with the drive.
With SuSE 9.3 it worked.
>
> If the above fails, than you should use same device (the writer) for
> reading and writing.
>
Will have to try that.
>
> Or, you can create an .iso image from the already burned DVD-RW and
> then use k3b to burn the image to a new media.
>
It delivers the same error when it started writing the ISO.
>
> Svetoslav Milenov (Sunny)
> >
> > ***************
> >
> > :: Problem 2 :: "Project does not contain all necessary VideoDVD files".
> >
> > I used the options: "New Video DVD Project". I copied the *.mpg / *.mpeg
> > file into the "VIDEO_TS" sub-directory. Then I tried to burn the new
> > Video DVD. It is from a recording with my Video camera captured as a PAL
> > DVD *.mpeg/*.mpg compatible file. This time K3b reports:
> >
> > System
> > -----------------------
> > K3b Version: 0.12
> >
> > KDE Version: 3.4.2 Level "b"
> > QT Version: 3.3.4
> > Kernel: 2.6.13-15.7-default
> > Devices
> > -----------------------
> > TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW;
> > CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R
> > Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD
> > +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16;
> > RAW/R96P; RAW/R96R; Restricted Overwrite]
> >
> > HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM;
> > DVD-ROM] [DVD-ROM; CD-ROM] [None]
> > K3b
> > -----------------------
> > Size of filesystem calculated: 0
> >
> > Used versions
> > -----------------------
> > mkisofs: 2.1
> >
> > mkisofs
> > -----------------------
> > /usr/bin/mkisofs: Warning: -follow-links does not always work correctly;
> > be careful.
> > Warning: Disabling Joliet support for DVD-Video.
> > /usr/bin/mkisofs: No such file or directory. Faild to
> > open /tmp/kde-root/k3bVideoDvd0//VIDEO_TS/VIDEO_TS.IFO
> > /usr/bin/mkisofs: Can't open VMG info for '/tmp/kde-root/k3bVideoDvd0/'.
> > /usr/bin/mkisofs: Unable to parse DVD-Video structures.
> > /usr/bin/mkisofs: Unable to make a DVD-Video image.
> >
> >
> >
> > As you can see, I even tried as root. Any help appreciated!
> >
> > :-)
> >
> > L3
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx
- Follow-Ups:
- Re: [SLE] Cannot copy (non-)encrypted DVD
- From: Ken Schneider
- Re: [SLE] Cannot copy (non-)encrypted DVD
- References:
- [SLE] Cannot copy (non-)encrypted DVD
- From: LLLActive@xxxxxxx
- Re: [SLE] Cannot copy (non-)encrypted DVD
- From: Bruce Marshall
- [SLE] Cannot copy (non-)encrypted DVD
- Prev by Date: Re: [SLE] cannot setup DSL/pppoe connect for no available etihernet connection (but I do have)
- Next by Date: Re: [SLE] Connecting to a Windows XP computer
- Previous by thread: Re: [SLE] Cannot copy (non-)encrypted DVD
- Next by thread: Re: [SLE] Cannot copy (non-)encrypted DVD
- Index(es):
Relevant Pages
|
