Re: [SLE] RESOLVED Re: [SLE] dhcpd Doesn't Run

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


The Tuesday 2005-12-27 at 21:21 -0600, Eric Hines wrote:

> Added both NICs to the one (which was the NIC facing the Internet) already in
> DHCPD_INTERFACE and restarted dhcpd. rc.dhcpd.log confirms that the daemon
> now is listening on all three NICs. That works like a champ.

But... do you really need a dhcpd _server_ in the interface on the
internet side?

> Thanks a million.

Welcome :-)

- --
Cheers,
Carlos Robinson

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Made with pgp4pine 1.76

iD8DBQFDsocAtTMYHG2NR9URAhVeAJ9d8xDyrx499LkQKU3RrfVcDKmIPQCfWrod
ONg4k5wrr6V4TuY3LfC5BeE=
=kJn9
-----END PGP SIGNATURE-----


--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx

Relevant Pages

  • Re: CEICW ERRORS WHEN RUN
    ... restarting the wins service or the SBS server? ... Ethernet adapter Server Local Area Connection: ... Connected to the internet via cable modem through a NetGear FVS318 ...
    (microsoft.public.windows.server.sbs)
  • Re: DNS & NAT
    ... When I have both of the NIC cards active, I get no internet activity ... on the server or any of the clients. ... But this won't fix the main issue that AD will register both NICs as a GC ... After you set this value, you must manually register your publicly available IP addresses for your domain to appear as: Same as parent folder Host "publicIP" DO that by just rt-clicking, new host, leave the hostname blank, and enter the IP of the internal NIC. ...
    (microsoft.public.windows.server.dns)
  • Re: Advise needed for proposed SBS 2003 setup.
    ... You only need two nics, ... after ISA is installed run the internet connection wizard and you can allow VPN through ISA ... can get a fibre connection to building3 but it would be nice. ... > SBS External ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: SBS 2003 no access to internal interface after adding NAT/basi
    ... You don't have anything close to a standard SBS 2003 setup-just because you ... have 2 NICs doesn't make it so with both NICs on the same subnet connected ... that the internal nic is accessible from the internet (in this kind of ... clients), but no access from internal clients to the internet (although ...
    (microsoft.public.windows.server.sbs)
  • Re: Multiple IP addresses outside of sbs
    ... make it even more difficult for someone to get into your network. ... The dual nics are pretty irrelevant to my current issue. ... between the internet and the sbs server so the the setup works. ...
    (microsoft.public.windows.server.sbs)