Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
- From: Bruce Marshall <bmarsh@xxxxxxxxxx>
- Date: Sat, 31 Dec 2005 13:58:26 -0500
On Saturday 31 December 2005 13:06, Ken Schneider wrote:
> Don't feel lonesome, my Linksys WRT54G also drops the signal for no
> apparent reason as well. I have to reboot the router to get the signal
> back. The cat5 connections keep on working without any loss of
> connection.
Have you upgraded the firmware lately? There's a pretty significant upgrade
out there in version 4.70.6 including QoS.
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx
- References:
- [SLE] Bombproof linux wireless PCI cards
- From: bernd
- Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
- From: bernd
- Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
- From: Ken Schneider
- [SLE] Bombproof linux wireless PCI cards
- Prev by Date: Re: [SLE] Suse 10.0 +kde +audio cd confusion
- Next by Date: Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
- Previous by thread: Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems
- Next by thread: Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
- Index(es):
Relevant Pages
- Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems
... I have to reboot the router to get the signal back. ... The cat5 connections
keep on working without any loss of connection. ... (SuSE) - Re: [SLE] Linksys WMP54G & SuSE 9.3 Pro problems (was: Bombproof...)
... Since my original post, all I've done ... I'm leaning toward router problems.
... The cat5 connections keep on working without any loss of ... (SuSE) - Re: Can I connect a Netgear ADSL Wireless Modem to Cable Broadband?
... >> Since cable is using cat5 connections, all that is required is not ...
>> router. ... >> Setup ppoe in the connection settings, ...
If you plug the Cm into one of the LAN ports and all ... (uk.telecom.broadband) - Re: Can I connect a Netgear ADSL Wireless Modem to Cable Broadband?
... >Since cable is using cat5 connections, all that is required is not to use ...
and connect the ISP cat5 cable to the hub of the router. ... >Connect all pc's to other
sockets, and share out the internet connection. ... If you plug the Cm into one of the
LAN ports and all ... (uk.telecom.broadband)
