[SLE] SUSE9.3 - SUSE Plugger problem with USB Serial port cable

Hi,

I am using a USB to Serial port cable. Initially when I start the computer and
linux then insert the USB Serial port cable the device is set
as /dev/ttyUSB0. If the USB Serial Port cable is removed then reinserted it
becomes /dev/ttyUSB1. Each time the USB Port cable is removed then reinserted
the device name is increased by one.

It appears to me that upon removeal of the device that SUSE Plugger is no
removeing the device from the device list.

Has anyone seen this problem?
Does anyone have any suggestions to fix this?

Thanks,



--
Bruce Samhaber
Senior Hardware Design Consultant
Tel: 613-724-5987 112 Kenora St.
Fax: 613-724-5987 Ottawa, Ontario
Cel: 613-297-6961 K1Y 3L1
mailto: bsamhaber@xxxxxxxxxxxx http://www3.sympatico.ca/marypat/

--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx

Relevant Pages

  • [opensuse] Re: [SLE] SUSE9.3 - SUSE Plugger problem with USB Serial port cable
    ... previously using SUSE 9.3 and am now using SUSE 10.1. ... When the USB Serial port cable is unplugged and re-inserted then it ... On Friday 03 March 2006 00:54, Bruce Samhaber wrote: ... removeing the device from the device list. ...
    (SuSE)
  • Re: Linux + serial port
    ... How about attaching the time receiver to the usb serial port? ... time is a linux only thing (and since the linux kernel etc keeps running ... martin@ | Martin Gregorie ...
    (uk.comp.os.linux)
  • Re: Linux + serial port
    ... Martin Gregorie writes: ... How about attaching the time receiver to the usb serial port? ... time is a linux only thing (and since the linux kernel etc keeps running ... DTR powers the receiver. ...
    (uk.comp.os.linux)