Re: [SLE] Changing hardware IRQ's
- From: Per Jessen <per@xxxxxxxxxxxx>
- Date: Sun, 30 Apr 2006 15:21:09 +0200
Hylton Conacher (ZR1HPC) wrote:
I have a 9.2 system here where the network card(Realtek 8139) and the[snip]
on-board sound have the same IRQ.
I would like to move the Ensonique on-board sound device to another
IRQ but do not know how. What is the 'correct' IRQ for sound devices?
I think it was 15 but I would prefer to leave te ide items alone.
Would moving eth0 to a different PCI slot help?
It's worth trying.
On the PCI-bus, IRQs and other hardware resources are assigned by
Plug-and-Play. This is not always the case on the ISA-bus, which is
why the BIOS on systems with ISA-busses will let you reserve IRQs and
DMA ports for non-PnP ISA cards.
As to your soundcard and your network sharing an IRQ, it shouldn't
really be a problem.
/Per Jessen, Zürich
--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx
- References:
- [SLE] Changing hardware IRQ's
- From: Hylton Conacher (ZR1HPC)
- [SLE] Changing hardware IRQ's
- Prev by Date: Re: [SLE] Warning to Americans!
- Next by Date: Re: [SLE] What's on vt10?
- Previous by thread: Re: [SLE] Changing hardware IRQ's
- Next by thread: Re: [SLE] Changing hardware IRQ's
- Index(es):
Relevant Pages
|
