Re: [SLE] SOLVED Recover Update of 10.1 from power failure hard crash.



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

here's something that may be worth a try...

1. boot disk 1 of your install set, and select installation (yes
installation, don't chicken out yet)
This will boot using the KERNEL ON THE DISK

2. when it prompts for the setup language, hit Abort
It will give you a message that an error has occured, hit ok, and then
take you thru a couple of menus

3. select Start installation or system>Boot installed system>Hard Drive,
then choose the partition to boot from

What this does is boot YOUR system using the rescue kernel on the disk,
rather than the "broken" kernel on your hard drive.

I have used this successfully to recover Novell's Linux Desktop (built
on Suse 9.2), that had downloaded an incomplete set of kernel updates.
(Exactly the same symptoms, getting dumped out to that prompt after "not
found" 'ing hardware.)

This workes. Also the making a new HD the same as the first as was also
sugested. I wish I had found this before I blew away my UnixWare and
Windows 2000 disk. I had just finished the installation the same as the
hosed disk. I tried this and it works. You have to do some fiddling.
With I was able to boot the disk to continue and back up the data. I then
put it back to the broken state and tried my other HD that I made exactly
the same with 10.1 on it. I was also able to copy over the data to it and
I was able to boot it and use smart to update it. So I now have two ways
to fix a similar problem.

Thanks to every one for the support and assistance in resolving this.

Thanks,

- --
Boyd Gerber <gerberb@xxxxxxxxx>
ZENEZ 1042 East Fort Union #135, Midvale Utah 84047
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: For info see http://quantumlab.net/pine_privacy_guard/

iD8DBQFEe6kdVtBjDid73eYRAg9LAJwMqer3rb+nQnBky3MwUkScX0wZtgCfUXdF
iuwYHXZpy0x4Wriu9fjUn+s=
=ThXd
-----END PGP SIGNATURE-----

--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx



Relevant Pages

  • Re: boot sector f*ed
    ... "I updated the machine and it doesn't boot anymore". ... 875P NeoFisr motherboard running on a Pentium 3.0ghz CPU; ... Please capture the output from running fdisk and bsdlabel on the problem disk ... anyway - I tried booting a minimal installation on the 2.4ghz machine ...
    (freebsd-questions)
  • Re: [SLE] SOLVED Recover Update of 10.1 from power failure hard crash.
    ... boot disk 1 of your install set, and select installation (yes ... This will boot using the KERNEL ON THE DISK ...
    (SuSE)
  • Re: boot sector f*ed
    ... The fbsd minimal installation that I had set up for recovery of the ... previous crash does not boot... ... touched the disk since last using it to look at the corrupted disk ... This sounds more and more like hardware troubles. ...
    (freebsd-questions)
  • Re: unable to install XP on new HD
    ... connected to the primary master HD and I was once able to boot to OS XP ... the floppy ... For a boot disk go here: http://www.bootdisk.com/bootdisk.htm and use the ... files and so I have to abort installation. ...
    (microsoft.public.windowsxp.help_and_support)
  • Fatal trap 12 during boot of 5.3-BETA7 installation CD
    ... I've got a Compaq Presario S3500CL desktop machine and every time I boot the ... 5.3-BETA7 miniinst installation CD, ... I've never reported a kernel Fatal trap before, ... pci0: ...
    (freebsd-current)