[SLE] /etc/sysconfig/network/ifcfg-lo - setting multiple IP-addresses

From: Per Jessen <per@xxxxxxxxxxxx>
Date: Sat, 26 Aug 2006 10:47:50 +0200

I'm trying to assign a virtual IP to the loopback interface 'lo':

/etc/sysconfig/network/ifcfg-lo:

# Loopback (lo) configuration
IPADDR_1=127.0.0.1/8
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
USERCONTROL=no
IPADDR_2=192.168.2.231/32

Can anyone spot why this isn't working?

/Per Jessen, Zürich

--
Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at http://lists.suse.com
Please read the FAQs: suse-linux-e-faq@xxxxxxxx

Follow-Ups:
- Re: [SLE] /etc/sysconfig/network/ifcfg-lo - setting multiple IP-addresses
  - From: Per Jessen

Prev by Date: Re: [SLE] Need software to cut a segment of an mp3 file
Next by Date: Re: [SLE] Canon printer Pixma iP1000
Previous by thread: [SLE] cannot create fb device for on-board intel 865G video
Next by thread: Re: [SLE] /etc/sysconfig/network/ifcfg-lo - setting multiple IP-addresses
Index(es):
- Date
- Thread

Relevant Pages

Re: Enabling the Intel 82562ET Nic
... During the standard YaST install procedure, the card is detected, and seemingly correctly configures the module name to e100. ... I have it configured to use DHCP to acquire an address. ... The loopback interface is up and I can ping localhost. ... etc.) in my linksys router configuration that would explain the lack of an IP address being served up. ...
(comp.os.linux.networking)
Re: Enabling the Intel 82562ET Nic
... During the standard YaST install procedure, the card is detected, and seemingly correctly configures the module name to e100. ... I have it configured to use DHCP to acquire an address. ... The loopback interface is up and I can ping localhost. ... etc.) in my linksys router configuration that would explain the lack of an IP address being served up. ...
(comp.os.linux.networking)
Re: Enabling the Intel 82562ET Nic
... During the standard YaST install procedure, the card is detected, and seemingly correctly configures the module name to e100. ... I have it configured to use DHCP to acquire an address. ... The loopback interface is up and I can ping localhost. ... etc.) in my linksys router configuration that would explain the lack of an IP address being served up. ...
(comp.os.linux.networking)
solaris 9 sendmail listen on 127.0.0.1 only error
... I am trying to get sendmail 8.12.10+Sun/8.12.10 to listen only on the ... loopback interface 127.0.0.1 on a Solaris 9 host.After making the ... configuration changes recommended by online sources to achieve this,I ... I am stuck with a large installed base of solaris 9 hosts ...
(comp.unix.solaris)