Re: [SLE] Dialup problem

On Wednesday 20 September 2006 13:28, James Knott wrote:
I think he's referring to a "studdered" dial tone, which the modem
doesn't recognize. The fix is to configure the modem to dial without
waiting for the dial tone, however a pause will be required before
dialing. I don't recall the details, as it's been years since I last
configured a modem.

Normally a comma (",") in the dialing string introduces a pause of 1/2
second. The option to dial without waiting for a tone is, *i think*,
application-specific. AFAIK there isn't an AT modem command which
explicitely does this.

--
----- stephan@xxxxxxxx http://s11n.net
"...pleasure is a grace and is not obedient to the commands
of the will." -- Alan W. Watts

Attachment: pgpxRaHL4nrbs.pgp
Description: PGP signature

Relevant Pages

  • Re: modem problem
    ... Under the properties of the modem go to Advanced. ... This bypasses the dial tone & forces the modem to dial without waiting for ...
    (microsoft.public.windowsxp.general)
  • disable the "no dial tone" on a usr modem
    ... I know there's a modem command to make the modem dial ... even though it dosen't hear a dial tone. ... I'm using a dos ...
    (microsoft.public.windowsxp.hardware)
  • Re: Too many processes running ????
    ... Call waiting task which gets installed by the drivers for V92 modems based ... browsing the Internet, a popup comes up on the Taskbar, ESSSPK, informing ... disconnected and your modem and/or phone rings. ...
    (microsoft.public.windowsxp.general)
  • Re: Fax number is dialing too quickly
    ... "Peter R. Fletcher" wrote: ... Advanced Modem Properties settings for the modem you are using - in ... This will explicitly tell the modem to wait until it hears a dial tone ... before dialing. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: Fax number is dialing too quickly
    ... Advanced Modem Properties settings for the modem you are using - in ... This will explicitly tell the modem to wait until it hears a dial tone ... before dialing. ... Please respond to the Newsgroup, so that others may benefit from the exchange. ...
    (microsoft.public.windowsxp.print_fax)