[opensuse] openoffice with nvidia X angs when press menu

It seems that more than 50% of the time if I press a menu in openoffice
X goes 100% cpu and hangs the desktop. Cannot switch to virtual
consoles or use control-options backspace to kill X.

setting render accel off and/or NoFlip on seem to reduce the frequency
but not enough.

Any ideas?

See this with opensuse 10.2 and various versions of office and the
nvidia driver.

--
===========================================================
Its A Smallworld is in Fantasyland
===========================================================
Nate Pearlstein - npearl@xxxxxxx - Product Support Engineer

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: Atmel releasing FLASH AVR32 ?
    ... A dual thread 40 MHz CPU can replace two 20 MHz CPUs. ... that a thread can only run max 1/2 or 1/3rd of the cycles ... switch at the start of the pipeline, ... equivalent to the interrupt latency. ...
    (comp.arch.embedded)
  • Re: What would you do next?
    ... Once you confirm it's the CPU ... And to follow up on my above post, when I reference pin 3, that should have ... If you test all pins of the CPU switch matrix you obviously ... Got all the way back to the Bigfoot opto board doing this process ...
    (rec.games.pinball)
  • Re: What would you do next?
    ... Once you confirm it's the CPU ... And to follow up on my above post, when I reference pin 3, that should have ... You really need to perform the switch matrix test on CPU as stated on ... Heavily inspected the whole blue white switch daisy chain to no ...
    (rec.games.pinball)
  • Re: Holy S*%T WTF did I just do to my game!?! STTNG--- UPDATE
    ... Just did the switch test per Clay's guide... ... CPU board in the T2, instead of the good CPU in the STNG. ... problems are in the CPU or the playfield. ... plugs going to the under-playfield opto board. ...
    (rec.games.pinball)
  • Re: Sw. Matrix row problem - no errors, just one row out
    ... Then look at it with fresh eyes. ... different cpu first. ... this damned switch matrix row problem figured out on this TAF. ... times before and since replacement, ...
    (rec.games.pinball)
Loading