Re: [opensuse] Trying to recover a hard drive



On Monday 30 April 2007 02:54, Pueblo Native wrote:
Here's a problem one of my friends sent me, his words.

i had a fedora 2 box crap out so i took the HD out and put it in a USB
enclosure to plug into another fedora 2 box.

i mounted the drive but the only options i see when i LS it is:
config-2.4.22-1.2115.nptl
grub
initrd-2.4.22-1.2115.nptl
kernal.h
lost+found
System.map-2.4.22-1.2115.nptl
vmlinux-2.4.22-1.2115.nptl
vmlinuz-2.4.22-1.2115.nptl

I think he has in fact mounted only one partition on the drive, probably
whichever one he mounted as /boot. If the USB mounted damaged disk were to
be /dev/sd1, for example, he should have a go at mount and
listing /dev/sd1b, /dev/sd1c, etc., until he finds the one with his data or
other vital matter on it. If it were me, I'd then copy the data safely off,
check to make good and sure that I'd *really* got all the vital data off, and
then start again with a fresh install on that 'crapped out' disk. That's if I
had reason to believe the crapping out to be software rather than hardware
related. If the disk is knackered then he would be throwing good time after
bad by doing anything other than discarding it.
HTH
Fergus

--
Fergus Wilde
Chetham's Library
Long Millgate
Manchester
M3 1SB

Tel: 0161 834 7961
Fax: 0161 839 5797

http://www.chethams.org.uk
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx



Relevant Pages

  • Re: fedora-list Digest, Vol 8, Issue 362 (Out of office reply.)
    ... Subject: FC1 Users: Sample yum.conf for Fedora Legacy Updates ... However, more importantly the same problems that beset 1.0 PR1 also beset 1.0 RC1: namely, you cannot install extensions or add search engines as an ordinary user. ... I have to swap between Disk 1 and Disk 2>when I boot-up my PC. ... It is very inconvenient so I>want to setup dual-boot such that I am able to select>the OS at the boot-up time and, in the futre, I can>always switch back to single boot with Windows XP disk>only. ...
    (Fedora)
  • Re: fedora-list Digest, Vol 55, Issue 69
    ... Management Server ... To All EEEpc and Fedora Users, ... I re-burnt CD 2 to see if it was a glitch but the new disk also came up ... to the boot line while installing. ...
    (Fedora)
  • Re: bootable failed sw raid 1 with F9
    ... Install went great, after reboot my system booted fine, so far so good. ... pulled out a disk and started again. ... by a GRUB shell, no boot logo, no idea what to do. ... I spent some time pinning the problem down to Fedora 9,. ...
    (Fedora)
  • help
    ... >> I realized that I did have a self boot disc and hunted it up. ... > the FC ISOs to the hard disk, and install from the hard disk. ... >> you could easily create your own fedora based live cd also. ... > That's the problem - you wrote the ISO image to cd as a single file. ...
    (Fedora)
  • Re: Locked up again! What can I check- Im on another box
    ... The hard disk and power supply have been replaced, ... system is not dual boot. ... I've had a problem similar to this several times, and it's happened in both Windows and Fedora; after much experience, I am inclined to say it is a faulty SATA cable or connector, and happens usually when Windows tries to access a page file. ... I'm going to replace the SATA cables and see what happens. ...
    (Fedora)