Re: [opensuse] 10.3 upgrade



On 2007/11/01 14:55 (GMT+0200) Stan Goodman apparently typed:

GRUB seems still OK to be, it points to a stage-2 loader
which is at sector 0x1973e28 (which is inside /dev/sda6 somewhere).

(GRUB, I should add occupies its own small (7MB) EXT2 partition, sda7.

GRUB stageX @PSN : 0x01973e28 Located on : /dev/hda6

So, all is apparently as it should be, and I can't tell why it does not boot ...

It's above my understanding why Grub needs to be in two partitions, so maybe
a DFSee 'part -b-' report would be useful.
--
"The basis of our Bill of Rights comes from the teachings
we get from Exodus and St. Matthew, from Isaiah and St.
Paul. President Harry S. Truman

Team OS/2 ** Reg. Linux User #211409

Felix Miata *** http://mrmazda.no-ip.com/
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx



Relevant Pages

  • Re: [opensuse] 10.3 upgrade
    ... It's above my understanding why Grub needs to be in two partitions, ... a DFSee 'part -b-' report would be useful. ...
    (SuSE)
  • Re: DFSEE and Flash Drives...
    ... I have an Adaptec SCSI HA with 2 SCSI HD's. ... and I wish to completely blow the partitions away and replace ... I have DFSEE 9.09 and wish to confirm what I think I ... partition and format the drive) so that its useable under OS/2? ...
    (comp.os.os2.setup.storage)
  • Re: DFSEE and Flash Drives...
    ... With the drive attached the DFSEE "map" command ... So the flash device is "visible" but I am unsure how to proceed from ... or LVM options only seem to see the SCSI HD and not the Flash drive. ... can see 2 partitions and therefore requires either both partitions to ...
    (comp.os.os2.setup.storage)
  • DFSEE and Flash Drives...
    ... I have an Adaptec SCSI HA with 2 SCSI HD's. ... also have a new 2Gb Imation USB flash drive that arrived set up as 2 ... and I wish to completely blow the partitions away and replace ... I have DFSEE 9.09 and wish to confirm what I think I ...
    (comp.os.os2.setup.storage)
  • Re: [opensuse] Re: Partitioning problem in installing oS v11.1
    ... as shown by the fact that the newly made partitions are on ... DFSee sees them. ... why don't you use YaST installer to do the ... partition information that isn't there anymore, ...
    (SuSE)