Re: [opensuse] Full HD on onboard X1250

crow wrote:
On Sun, Apr 27, 2008 at 9:41 AM, David C. Rankin

Hi,

Thnx for you replay it really really help :).
After 2 days of work i am able again to play with Suse 10.3x86_64. I
removed again fgrlx driver and install again, now i am able to run
also glxgears test and fgl_glxgears (if i use "sudo fgl_glxgears" i
got Error: couldn´t open display (null), but if i just run it as
normal user "fgl_glxgears" i got bench test) results:


Great, I knew it was just a matter of time. I have struggled with the ATI driver ever since October when 10.3 was released. It was in horrible shape then. Now, I really have no complaints. I only have one remaining bug open with Novell and ATI at present, and hopefully it will be fixed for 11.0.

fgl_glxgears
Using GLX_SGIX_pbuffer
4423 frames in 5.0 seconds = 884.600 FPS (start of bench)
4609 frames in 5.0 seconds = 921.800 FPS (max that i sow)

glxgears
15018 frames in 5.0 seconds = 3003.552 FPS (max that i sow)

Regarding Modline: sax2 -r -m 0=fglrx generete a modline for full hd
wich is from xorg.conf :
Section "Modes"
Identifier "Modes[0]"
Modeline "1920x1080" 148.00 1920 2008 2052 2200 1080 1084 1089
1125 +HSync +VSync
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
EndSection


It would appear you have a typo. 19200 should be 1920


But if i try to generate one with your suggestion i got:
vdrbox:~ # gtf 19200 1080 60
^

# 19200x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 1729.05 MHz
Modeline "19200x1080_60.00" 1729.05 19200 20424 22488 25776 1080
1081 1084 1118 -HSync +Vsync

At 1920, it works and there is a good match with sax2:

00:02 nemesis~> gtf 1920 1080 60

# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync

Good luck!

--
David C. Rankin, J.D., P.E.
Rankin Law Firm, PLLC
510 Ochiltree Street
Nacogdoches, Texas 75961
Telephone: (936) 715-9333
Facsimile: (936) 715-9339
www.rankinlawfirm.com
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx