Re: [opensuse] VLAN & SUSE

On Sat, May 31, 2008 at 6:48 AM, James Knott <james.knott@xxxxxxxxxx> wrote:
It made me wonder if it's possible to configure a NIC to be part of
a VLAN, instead of requiring a switch port to be configured for that VLAN.

I don't know much about VLANs. But you might find this article helpful.

VLANs on Linux
http://www.linuxjournal.com/article/7268

Mike
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: Question about VLAN (802.1Q) on Windows Server 2003
    ... > utility from Intel to create, modify and configure the VLAN on adapter. ... You'll have to combine Static and Dynamic VLANs at the same switch port. ...
    (microsoft.public.windows.server.networking)
  • Re: 7940/7960 setting admin vlan for non-cisco switch
    ... them the setting would stick if the phone is plugged into a switch port ... that has no VLANs enabled (all untagged frames). ... into a port that has the default vlan untagged and the phone vlan ... Prev by Date: ...
    (comp.dcom.sys.cisco)
  • Re: Managed gigabit switch as router..?
    ... You would actually need to change all of the subnets so ... being in VLAN C) is not VLAN aware. ... the server participate in both VLANs with an IP interface ... and set the switch port to be in both VLANS ...
    (comp.dcom.lans.ethernet)
  • Re: Exposing multiple VLANs to host
    ... the attached host to be aware of many VLANs on that port at the same time. ... VLAN X and after disconnecting it another host with IP address of VLAN Y. ... I have configured the switch port ... but after connecting a host and configuring it for ...
    (comp.dcom.sys.cisco)
  • Re: [opensuse] VLAN & SUSE
    ... instead of requiring a switch port to be configured for ... that VLAN. ... the vendor kernels all include vlan support already. ...
    (SuSE)