Re: [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- From: "Rajko M." <rmatov101@xxxxxxxxxxx>
- Date: Wed, 23 Jul 2008 19:00:23 -0500
On Wednesday 23 July 2008 07:13:48 am Peter Bloomfield wrote:
On Tuesday 22 July 2008 21:14, Rajko M. wrote:
On Tuesday 22 July 2008 07:13:37 am Peter Bloomfield wrote:
...
I am still 'non the wiser' as to why sax2 failed. If someone can let me
know how to pipe the output of the command 'sax2 -a' to a log file I
will post it here. I can log most of the ouput, but not the lines
during the failure, where it prints which lines of which object the
program failed at.
/var/log/SaX.log should be good enough for debugging.
I looked in here but there does not appear to much helpful debugging
information.
Actually helpful is XOrg.0.log, SaX.log and output of 'hwinfo -gfxcard'. Each
separately is not complete information. There is also third utility that I
can't recall the name.
There is difference in output of 'hwinfo -gfxcard' when you boot in runlevel 3
with onboard adapter enabled or disabled in BIOS. So far I recall it is fine
if primary adapter is the same as required with 'sax2 -c <card_number>, and
not so if you ask for another card. I had problem with this computer because
BIOS would enable onboard adapter although it was manually disabled, so at
the end I gave up and use onboard graphic. It is slightly slower than add on
card, but I can live with it. I guess it was looking for PCI-e only and add
on was plain PCI, so it will not see add on card. Though, I never bought
PCI-e to check is that the case.
In any case it would be interesting to file bug report.
I have never filed a bug report, since I always assume that I have screwed
something up, which is invariably the case.
Here there was not much I could mess up during install, so will look into
this. I would like to be able to save the listing from the program to put
in the bug report, but have failed so far to do so.
I wouldn't worry about that output as part of that is in SaX.log or
Xorg.0.log. If guys that will debug problem need more they will tell what and
how to obtain it.
--
Regards, Rajko
http://en.opensuse.org/Portal needs helpful hands.
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
- References:
- [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- From: Peter Bloomfield
- Re: [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- From: Rajko M.
- Re: [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- From: Peter Bloomfield
- [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- Prev by Date: Re: [opensuse] NFS & Host Configuration Problem
- Next by Date: Re: [opensuse] Re: ntfs write; future of FAT32: FAT40/48/64? Other FS?
- Previous by thread: Re: [opensuse] 'Missing' monitor during OpenSuSE 11.0 Install
- Next by thread: [opensuse] smplayer doesn't work under kde4
- Index(es):
Relevant Pages
|
