Re: [opensuse] 10.2 no RAID to 11.0 RAID 1

Hylton Conacher (ZR1HPC) wrote:

I see 11.0 has an option under the partitioner in YAST for RAID and I
am wondering if thee 11.0 install will allow me to create the RAID
array and set it up if it detects two drives of the same size and with
identical partitions?

Yes it will.


/Per Jessen, Zürich

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
    ... > like a fresh install and porting their application and data to the new system. ... PERC4/Di RAID on the motherboard, Dell DLT tape drive, Dell slimline ... PATA connector usable for two PATA drives. ... After downloading drivers from both SCO and Dell to create the ...
    (comp.unix.sco.misc)
  • [Summary] saving disksuite info while rebuilding server
    ... "Caution - If a full install of Solaris is performed, ... make sure you have tape backups of everything. ... I had an old workgroup storage array with six 18G drives formatted RAID5 ...
    (SunManagers)
  • Re: Problems with software RAID on SATA
    ... Connected to this are two 320GB drives ... >>which I want to turn into a RAID1 array. ... >>I'm almost certain it's a problem with initting the RAID arrays at boot. ...
    (Debian-User)
  • Re: RAID newbie...can I have several partitions on a RAID 1 array?
    ... You haven't expounded upon why you think you need raid. ... better backup device rather than buy 2 cheap RAID HBAs. ... RAID array then I would have to replace the mobo with the same one or at ... Lets say, for example, you buy 2 identical model drives, from ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: [PATCH 000 of 5] md: Introduction
    ... "why linux raid isn't Raid really, why it can be worse than plain disk") ... After this, the array ... error is in the filesystem, due to the complex layout of raid5. ... hundreds or 1000s of drives, you've quite high probability that some of them will fail sometimes, or will develop a bad sector etc). ...
    (Linux-Kernel)