Re: [opensuse] 10.2 no RAID to 11.0 RAID 1

On Mon, Sep 22, 2008 at 6:27 PM, Carlos E. R.
<robin.listas@xxxxxxxxxxxxxx> wrote:

But he did not wait enough for answers or did not apply them, and
reinstalled, blaming mdadm.


I applied everything I could get my hands on. You dont think I tried
every single posting? Nothing works. I spent two full weekends
(saturday and sunday) and I certainly had more insight into it when
the second system, after correctly halting, would not turn back on
again! How do you explain that? Shutdown, wait for it to turn off,
swap a PCI card in the system, turn it back on and the RAID does not
work? If the system was correctly shut down I would suspect the drives
or the controller. The controller in that system is fine, only the
drives were new. The manufacturer long test shows no errors. The only
other new factor is the PCI card, which was replacing an identical
(defective) card and the md RAID. PCI Win Modem cards dont cause md
RAID to think it is corrupted.
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Newvbie hard drive controller question
    ... I'm new to Debian and I've loaded 2.2.20-compact on a Compaq Proliant DL380 that ... controller, and a PCI SIIG "raid" controller. ... Unfortunatly I don't have much info on the PCI card. ...
    (Debian-User)
  • Re: SATA software RAID-inkernel vs hardware
    ... > I need to set up a server with two RAID1 SATA drives to do mirroring. ... > I was wondering if there was any point in using software RAID ... > Also using a PCI card for the disc drives in place of the built in SATA ...
    (freebsd-isp)
  • Re: Why doesnt VIA RAid Tool recognize my RAID drive?
    ... A pair of them is set up as a raid 0. ... The VIA RAID Tool v4.04 shows the following: Controller 0, Channel 0, Master as not in any disk array, 238,475 MB ... Have you purchased a separate PCI card with a VIA VT6421 ... VIA RAID management software makes sense. ...
    (microsoft.public.windowsxp.general)
  • Re: raid hardware
    ... That depends on what you want: local attached (PCI card), ... If you want a PCI card RAID I think there are just two choices: ... and floppy-based utitlity for configuration management. ... > What RAID hardware arrays are available for OpenVMS? ...
    (comp.os.vms)
  • Re: trouble with entering Promise BIOS
    ... I have an AGP graphics card, a Belkin Pre-N PCI card, and a ... I get an exclamation point in Device Manager ... Device Manager to see the RAID if I didn't see it in the BIOS. ...
    (alt.comp.periphs.mainboard.asus)