Re: [opensuse] comp cant be access, hd failure ?

I install 11.1 for several days, in last few days my system cant be
acces in the morning, I can ping to it, but I cannot ssh and samba
didnt work. When I check /var/log/messages, I some errors. Then after
I restart, i see almost same errors (you can see it bellow). I that
because of Hardware failure ? my Hardisk ? I have 2 disk, 1 with SATA
(/dev/sda), 1 with IDE (/dev/sdb).

regards,

Please remember to avoid wrapping lines of the sort that follow.
Sorry.. :)
linux-gkfg:/home/arie # mount

Feb 9 21:19:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius
changed from 35 to 34
Feb 9 21:19:40 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors
Feb 9 21:19:40 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors

Here you're seeing that your hard drive has errors that cannot be
corrected (the data redundancy is not sufficient to correct the errors).

You are best advised to avoid using this drive immediately, replace it
and restore or reinstall whatever it held.

Ok. What if I use fsck.ext3, would be any good ? Anyway i will replace
this hard drive tonight, cause it's production server :( Now I run
crontab to bacekup almost every hour.. so if anything goes wrong i
still can restore to earliest hour..

Randall Schulz


Thank you..
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: DSL connectivity problems - was fine previously
    ... Thanks for the reply - FYI I tried a restore and that didnt work so I ... >> You need to use PPPoE with Verizon DSL, as far as I know - so either the ... >>> The network area ...
    (microsoft.public.windowsxp.network_web)
  • Re: Big Problem with XP Professional
    ... Ugh what a mess. ... with all the application problems and reloads ... >> I already did a restore and only had one restore point and it didnt work ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: change outlook message class
    ... contacts with the designed form. ... that the current message class is IPM.Contact and when I click on convert, ... >> want to restore the default contact form. ... >> used this application from Microsoft's web site but it didnt work ...
    (microsoft.public.outlook.general)
  • System restore gone bad? its eating all my hardrive :-(
    ... something is hidding in my hardrive, but the thing is this, because of some ... lost drivers I did ssystem restore, I have a 120 gig hardrive, from which I ... had 91 gigs still available, I had to do a restore to look for drives, didnt ... work, went back to restore doing it one day, and if didnt work, I did it ...
    (microsoft.public.windowsxp.newusers)