Re: [opensuse] 11.2 network install - yast crashes with locale error

I wrote:
I started yast and got as far as choosing the partitions.

Actually, I got a little bit further. Or rather I repeated the process
and watched more closely ...

After that, yast died and the ssh session shows:

error: cannot open Packages index using db3 - No such file or directory (2)

This error occurred after I chose the partitions and before the screen
to setup a user was displayed.

terminate called after throwing an instance of 'std::runtime_error'
what(): locale::facet::_S_create_c_locale name not valid
YaST got signal 6 at YCP file String.ycp:128
/usr/lib/YaST2/startup/YaST2.call: line 288: 4217 Aborted
$OPT_FBITERM y2base "$Y2_MODULE_NAME" $Y2_MODE_FLAGS $Y2_MODULE_ARGS
$Y2_MODE $Y2_UI_ARGS
unicode_stop skipped on /dev/pts/0
inst-sys:~ # Connection to pcx36 closed by remote host.

This block all appeared after I setup a user and a root password.

I've tried changing LANG and LC_ALL to various values (blank, 'C' etc)
but it doesn't seem to make any difference.

y2log shows this at the end of its run:

2010-02-15 14:59:34 <1> 10.14.0.9(7366) [Interpreter]
clients/hwinfo_proposal.ycp:34 Calling YaST client hwinfo_proposal
2010-02-15 14:59:34 <1> 10.14.0.9(7366) [YCP] InitHWinfo.ycp:93 memory:
[$["bus":"None", "bus_hwcfg":"none", "class_id":257, "model":"Main
Memory", "old_unique_key":"4srm.CxwsZFjVASF",
"resource":$["mem":[$["active":true, "length":1072561152, "start":0]],
"phys_mem":[$["range":1073741824]]], "sub_class_id":2,
"unique_key":"rdCR.CxwsZFjVASF"]]
2010-02-15 14:59:34 <1> 10.14.0.9(7366) [YCP] InitHWinfo.ycp:181 System
string:


and when I turn debugging on for a later run, the last line is followed
by this:

2010-02-15 17:13:33 <1> 10.14.0.9(14857) [YCP] InitHWinfo.ycp:181 System
string:
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue
(initialized@0x9f09818 = 'true')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [libycp]
ExecutionEnvironment.cc(popframe):115 Pop frame 0xa05bc68
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [libycp]
ExecutionEnvironment.cc(pushframe):105 Push frame
String::FormatSizeWithPrecision (memory_size, 2, true)
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (bytes@0x80b1328 =
'1073741824')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (precision@0x80b13c0
= '2')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue
(omit_zeroes@0x80b1478 = 'true')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (units@0x80b5be8 =
'["B", "kB", "MB", "GB", "TB"]')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (index@0x80b5c38 = '0')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (whole@0x80b5ce8 =
'1.07374e+09')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (whole@0x80b5ce8 =
'1.04858e+06')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (index@0x80b5c38 = '1')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (whole@0x80b5ce8 =
'1024.')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (index@0x80b5c38 = '2')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (whole@0x80b5ce8 = '1.')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (index@0x80b5c38 = '3')
2010-02-15 17:13:33 <0> 10.14.0.9(14857) [liby2]
SymbolEntry.cc(setValue):107 SymbolEntry::setValue (precision@0x80b13c0
= '0')

I've still no idea what it means. Does anybody have a clue?

Sadly, this is still the case. Does anybody know what these yast logs mean?

Thanks, Dave

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: Time to sell my basses
    ... Finish setup on OLP 8 string conversion. ... Possibly shim the neck Recut G ... Tune piccolo bass: Make wenge neck. ...
    (alt.guitar.bass)
  • RE: Can you help
    ... Well the way its setup is I have all three forms setup one ... select the relevant text in the combo box it makes teh sub ... text (string) as in James or a number as in ...
    (microsoft.public.access.modulesdaovba)
  • setup and radius
    ... I'm having a spot of trouble getting my Yamaha RBX4-A2 setup how I want it. ... I like action kind of low, but the higher frets are choking out when I bend notes. ... As I understand it this is a result of the radius being smaller than I'm used to. ... holding down 1st fret measuring 17th fret 3/32" on the G string and 5/64" on the B string. ...
    (uk.music.guitar)
  • Re: Time to sell my basses
    ... Finish setup on OLP 8 string conversion. ... Possibly shim the neck Recut G ... Tune piccolo bass: Make wenge neck. ...
    (alt.guitar.bass)
  • Re: Ric Dead E string
    ... Did you try more than one E string? ... bass, or another brand, whatever, to make sure you didn't get two non- ... actually hoping that there is an easy fix like that, ... culprit...IOW improper setup out of the factory. ...
    (alt.guitar.bass)