Re: [opensuse] USB Webcam audio problem on Linux

Il giorno mer, 24/03/2010 alle 15.27 +0100, Dominique Leuenberger ha
scritto:
On 3/24/2010 at 15:17, Marco Calistri <marco.calistri@xxxxxxxxxxxx> wrote:
Note: If I firstly boot on Windows, then reboot on openSUSE 11.2,
letting camera plugged, then audio works, but voice is sampled at bigger
speed, appearing as Walt Disney Mickey Mouse original voice!

That behaviour heavily reminds me of any other device that is loading a firmware in the device when booting into Windows (WiFi for example), keeping
the firmware there until you unplug it.
Did you ever check what dmesg tells you when you connect this device?

Dominique

Hi Dominique,

I attach two dmesg:

1) Without Webcam plugged in

2) With Webcam plugged in

Furthermore the output of lsusb -v

Enjoy! ;-)

--
opensuse 11.2 - Linux 2.6.31.12-0.2-default x86_64
AMD Turion(tm) 64 Mobile Technology MK-36 - GeForce Go 6150
Gnome 2.28.2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.12-0.2-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2010-03-16 21:25:39 +0100
[ 0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000abf00000 (usable)
[ 0.000000] BIOS-e820: 00000000abf00000 - 00000000abf15000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000abf15000 - 00000000abf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000abf80000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF8000000 write-back
[ 0.000000] 3 base 00A8000000 mask FFFC000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000150000000 aka 5376M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ac000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xabf00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000abf00000 (usable)
[ 0.000000] modified: 00000000abf00000 - 00000000abf15000 (ACPI data)
[ 0.000000] modified: 00000000abf15000 - 00000000abf80000 (ACPI NVS)
[ 0.000000] modified: 00000000abf80000 - 00000000b0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000abf00000
[ 0.000000] 0000000000 - 00abe00000 page 2M
[ 0.000000] 00abe00000 - 00abf00000 page 4k
[ 0.000000] kernel direct mapping tables up to abf00000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000150000000
[ 0.000000] 0100000000 - 0150000000 page 2M
[ 0.000000] kernel direct mapping tables up to 150000000 @ b000-12000
[ 0.000000] RAMDISK: 37909000 - 37fef319
[ 0.000000] Compaq Presario V6000: using 0xed I/O delay port
[ 0.000000] ACPI: RSDP 00000000000f88f0 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 00000000abf0bc24 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000abf14c15 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 00000000abf0bc64 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000abf15fc0 00040
[ 0.000000] ACPI: SSDT 00000000abf14c89 00115 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000abf14d9e 0003C (v01 HP MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000abf14dda 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 00000000abf14e12 00050 (v01 HP APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000abf14e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000abf14e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000150000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000024fff]
[ 0.000000] bootmap [0000000000025000 - 000000000004efff] pages 2a
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001c718b0] TEXT DATA BSS ==> [0001000000 - 0001c718b0]
[ 0.000000] #3 [0037909000 - 0037fef319] RAMDISK ==> [0037909000 - 0037fef319]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001c72000 - 0001c7217c] BRK ==> [0001c72000 - 0001c7217c]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f8920] f8920
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880001e00000-ffff8800057fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00150000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000abf00
[ 0.000000] 0: 0x00100000 -> 0x00150000
[ 0.000000] On node 0 totalpages: 1031832
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3830 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 685880 pages, LIFO batch:31
[ 0.000000] Normal zone: 4480 pages used for memmap
[ 0.000000] Normal zone: 323200 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000abf00000 - 00000000abf15000
[ 0.000000] PM: Registered nosave memory: 00000000abf15000 - 00000000abf80000
[ 0.000000] PM: Registered nosave memory: 00000000abf80000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff88000584a000, static data 82912 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012910
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2f58000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 3981976k/5505024k available (5507k kernel code, 1377696k absent, 145352k reserved, 4539k data, 1024k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2008.999 MHz processor.
[ 0.000015] spurious 8259A interrupt: IRQ7.
[ 0.000101] Console: colour dummy device 80x25
[ 0.000105] console [tty0] enabled
[ 0.000323] hpet clockevent registered
[ 0.000327] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000334] Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.99 BogoMIPS (lpj=8035996)
[ 0.006188] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.006302] Security Framework initialized
[ 0.006322] AppArmor: AppArmor initialized
[ 0.008107] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011780] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013140] Mount-cache hash table entries: 256
[ 0.013310] Initializing cgroup subsys ns
[ 0.013314] Initializing cgroup subsys cpuacct
[ 0.013319] Initializing cgroup subsys memory
[ 0.013337] Initializing cgroup subsys devices
[ 0.013339] Initializing cgroup subsys freezer
[ 0.013342] Initializing cgroup subsys net_cls
[ 0.013368] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.013371] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.013375] CPU 0/0x0 -> Node 0
[ 0.013377] tseg: 00abf80000
[ 0.013380] mce: CPU supports 5 MCE banks
[ 0.013390] using C1E aware idle routine
[ 0.013393] Performance Counters: AMD PMU driver.
[ 0.013398] ... version: 0
[ 0.013400] ... bit width: 48
[ 0.013401] ... generic counters: 4
[ 0.013403] ... value mask: 0000ffffffffffff
[ 0.013405] ... max period: 00007fffffffffff
[ 0.013407] ... fixed-purpose counters: 0
[ 0.013409] ... counter mask: 000000000000000f
[ 0.013423] SMP alternatives: switching to UP code
[ 0.024194] Freeing SMP alternatives: 34k freed
[ 0.024232] ACPI: Core revision 20090521
[ 0.044049] Setting APIC routing to flat
[ 0.044586] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084285] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (4017.99 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] devtmpfs: initialized
[ 0.088941] Booting paravirtualized kernel on bare hardware
[ 0.089168] regulator: core version 0.5
[ 0.089198] Time: 20:39:55 Date: 03/24/10
[ 0.089266] NET: Registered protocol family 16
[ 0.089417] node 0 link 0: io port [1000, fffff]
[ 0.089420] TOM: 00000000b0000000 aka 2816M
[ 0.089424] node 0 link 0: mmio [e0000000, efffffff]
[ 0.089428] node 0 link 0: mmio [a0000, bffff]
[ 0.089431] node 0 link 0: mmio [b0000000, fe0bffff]
[ 0.089434] TOM2: 0000000150000000 aka 5376M
[ 0.089437] bus: [00,ff] on node 0 link 0
[ 0.089439] bus: 00 index 0 io port: [0, ffff]
[ 0.089442] bus: 00 index 1 mmio: [b0000000, ffffffff]
[ 0.089444] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.089447] bus: 00 index 3 mmio: [150000000, fcffffffff]
[ 0.089455] ACPI: bus type pci registered
[ 0.089531] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6
[ 0.089535] PCI: MCFG area at e0000000 reserved in E820
[ 0.089873] PCI: Using MMCONFIG at e0000000 - e06fffff
[ 0.089875] PCI: Using configuration type 1 for base access
[ 0.090874] bio: create slab <bio-0> at 0
[ 0.092534] ACPI: EC: Look up EC in DSDT
[ 0.097580] ACPI: BIOS _OSI(Linux) query ignored
[ 0.098160] ACPI: Interpreter enabled
[ 0.098167] ACPI: (supports S0 S3 S4 S5)
[ 0.098196] ACPI: Using IOAPIC for interrupt routing
[ 0.098753] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.121137] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.121140] ACPI: EC: driver started in interrupt mode
[ 0.121600] ACPI: No dock devices found.
[ 0.121772] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.122087] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122091] pci 0000:00:02.0: PME# disabled
[ 0.122130] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122133] pci 0000:00:03.0: PME# disabled
[ 0.122157] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff]
[ 0.122164] pci 0000:00:05.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.122171] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff]
[ 0.122177] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.122372] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f]
[ 0.122439] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f]
[ 0.122445] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f]
[ 0.122471] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.122477] pci 0000:00:0a.1: PME# disabled
[ 0.122513] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff]
[ 0.122614] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff]
[ 0.122652] pci 0000:00:0b.0: supports D1 D2
[ 0.122654] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122659] pci 0000:00:0b.0: PME# disabled
[ 0.122692] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff]
[ 0.122730] pci 0000:00:0b.1: supports D1 D2
[ 0.122732] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122737] pci 0000:00:0b.1: PME# disabled
[ 0.122781] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f]
[ 0.122831] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7]
[ 0.122836] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7]
[ 0.122842] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf]
[ 0.122848] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3]
[ 0.122853] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f]
[ 0.122859] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff]
[ 0.122958] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff]
[ 0.122996] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.123000] pci 0000:00:10.1: PME# disabled
[ 0.123039] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff]
[ 0.123045] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7]
[ 0.123071] pci 0000:00:14.0: supports D1 D2
[ 0.123073] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123077] pci 0000:00:14.0: PME# disabled
[ 0.123220] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff]
[ 0.123224] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff]
[ 0.123229] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff]
[ 0.123264] pci 0000:03:00.0: reg 10 32bit mmio: [0xb6000000-0xb6003fff]
[ 0.123313] pci 0000:03:00.0: supports D1 D2
[ 0.123335] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.123402] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff]
[ 0.123450] pci 0000:00:10.0: transparent bridge
[ 0.123466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.123686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.123741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.172747] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
[ 0.173025] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.173299] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.173572] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.173846] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.174120] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.174394] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
[ 0.174667] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.174941] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.175213] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
[ 0.175486] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
[ 0.175759] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.176042] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.176316] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
[ 0.176592] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
[ 0.176868] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
[ 0.177142] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
[ 0.177429] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[ 0.177711] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
[ 0.177959] SCSI subsystem initialized
[ 0.178038] libata version 3.00 loaded.
[ 0.178126] usbcore: registered new interface driver usbfs
[ 0.178147] usbcore: registered new interface driver hub
[ 0.178176] usbcore: registered new device driver usb
[ 0.178257] PCI: Using ACPI for IRQ routing
[ 0.178619] PCI-DMA: Disabling AGP.
[ 0.178708] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.178710] PCI-DMA: using GART IOMMU.
[ 0.178715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.179225] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.179233] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.185396] AppArmor: AppArmor Filesystem Enabled
[ 0.185416] pnp: PnP ACPI init
[ 0.185436] ACPI: bus type pnp registered
[ 0.189459] pnp: PnP ACPI: found 13 devices
[ 0.189462] ACPI: ACPI bus type pnp unregistered
[ 0.189476] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.189485] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.189489] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.189493] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.189497] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.189503] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.189510] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.189514] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 0.189517] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 0.189521] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 0.189524] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 0.189528] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 0.189531] system 00:04: ioport range 0x2000-0x203f has been reserved
[ 0.189538] system 00:05: ioport range 0x360-0x361 has been reserved
[ 0.189541] system 00:05: ioport range 0x380-0x383 has been reserved
[ 0.189544] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.194340] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.194344] pci 0000:00:02.0: IO window: 0x4000-0x4fff
[ 0.194348] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff
[ 0.194352] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff
[ 0.194357] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.194360] pci 0000:00:03.0: IO window: disabled
[ 0.194363] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff
[ 0.194367] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.194370] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07
[ 0.194372] pci 0000:00:10.0: IO window: disabled
[ 0.194376] pci 0000:00:10.0: MEM window: disabled
[ 0.194380] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.194390] pci 0000:00:02.0: setting latency timer to 64
[ 0.194396] pci 0000:00:03.0: setting latency timer to 64
[ 0.194402] pci 0000:00:10.0: setting latency timer to 64
[ 0.194407] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.194410] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.194413] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
[ 0.194416] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff]
[ 0.194419] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff]
[ 0.194423] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff]
[ 0.194426] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.194429] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.194509] NET: Registered protocol family 2
[ 0.194710] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.196492] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.201191] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.201773] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.201776] TCP reno registered
[ 0.201910] NET: Registered protocol family 1
[ 0.201985] Unpacking initramfs...
[ 0.344038] Freeing initrd memory: 7064k freed
[ 0.347823] Simple Boot Flag at 0x36 set to 0x1
[ 0.348093] Scanning for low memory corruption every 60 seconds
[ 0.348291] audit: initializing netlink socket (disabled)
[ 0.348307] type=2000 audit(1269463195.348:1): initialized
[ 0.356932] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.357070] VFS: Disk quotas dquot_6.5.2
[ 0.357108] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.357266] msgmni has been set to 1947
[ 0.357375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.357378] io scheduler noop registered
[ 0.357381] io scheduler anticipatory registered
[ 0.357383] io scheduler deadline registered
[ 0.357402] io scheduler cfq registered (default)
[ 0.357503] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.357509] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.357552] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.357580] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.357588] pci 0000:00:05.0: Boot video device
[ 0.568108] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.568166] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.568227] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.568401] alloc irq_desc for 24 on node 0
[ 0.568404] alloc kstat_irqs on node 0
[ 0.568415] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.568421] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.568541] alloc irq_desc for 25 on node 0
[ 0.568543] alloc kstat_irqs on node 0
[ 0.568549] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.568554] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.568639] pci-stub: invalid id string ""
[ 0.568844] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001800000, using 3072k, total 65536k
[ 0.568848] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.568851] vesafb: scrolling: redraw
[ 0.568854] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.569051] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.582998] bootsplash: silentjpeg size 91628 bytes
[ 0.599120] bootsplash: ...found (1024x768, 50700 bytes, v3).
[ 0.655408] Console: switching to colour frame buffer device 124x44
[ 0.700041] Switched to high resolution mode on CPU 0
[ 0.711459] fb0: VESA VGA frame buffer device
[ 0.713274] Non-volatile memory driver v1.3
[ 0.713277] Linux agpgart interface v0.103
[ 0.713281] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.713789] Fixed MDIO Bus: probed
[ 0.713797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.714305] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.714310] alloc irq_desc for 22 on node 0
[ 0.714313] alloc kstat_irqs on node 0
[ 0.714325] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
[ 0.714344] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.714348] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.714383] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.714426] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.714431] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.714457] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
[ 0.724011] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.724049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.724052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724055] usb usb1: Product: EHCI Host Controller
[ 0.724058] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-default ehci_hcd
[ 0.724060] usb usb1: SerialNumber: 0000:00:0b.1
[ 0.724148] usb usb1: configuration #1 chosen from 1 choice
[ 0.724181] hub 1-0:1.0: USB hub found
[ 0.724191] hub 1-0:1.0: 8 ports detected
[ 0.724296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.724772] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.724778] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
[ 0.724798] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.724802] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.724813] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.724830] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
[ 0.782021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.782025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.782027] usb usb2: Product: OHCI Host Controller
[ 0.782030] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-default ohci_hcd
[ 0.782033] usb usb2: SerialNumber: 0000:00:0b.0
[ 0.782109] usb usb2: configuration #1 chosen from 1 choice
[ 0.782138] hub 2-0:1.0: USB hub found
[ 0.782150] hub 2-0:1.0: 8 ports detected
[ 0.782236] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.782282] Initializing USB Mass Storage driver...
[ 0.782305] usbcore: registered new interface driver usb-storage
[ 0.782308] USB Mass Storage support registered.
[ 0.782331] usbcore: registered new interface driver libusual
[ 0.782343] usbcore: registered new interface driver ums-alauda
[ 0.782356] usbcore: registered new interface driver ums-cypress
[ 0.782368] usbcore: registered new interface driver ums-datafab
[ 0.782380] usbcore: registered new interface driver ums-freecom
[ 0.782393] usbcore: registered new interface driver ums-isd200
[ 0.782405] usbcore: registered new interface driver ums-jumpshot
[ 0.782418] usbcore: registered new interface driver ums-karma
[ 0.782430] usbcore: registered new interface driver ums-onetouch
[ 0.782444] usbcore: registered new interface driver ums-sddr09
[ 0.782456] usbcore: registered new interface driver ums-sddr55
[ 0.782468] usbcore: registered new interface driver ums-usbat
[ 0.782513] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.799323] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.799330] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.799397] mice: PS/2 mouse device common for all mice
[ 0.800567] rtc_cmos 00:09: RTC can wake from S4
[ 0.800616] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.800655] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.800667] cpuidle: using governor ladder
[ 0.800670] cpuidle: using governor menu
[ 0.800970] usbcore: registered new interface driver hiddev
[ 0.800985] usbcore: registered new interface driver usbhid
[ 0.800988] usbhid: v2.6:USB HID core driver
[ 0.900302] TCP cubic registered
[ 0.900368] NET: Registered protocol family 10
[ 0.900888] lo: Disabled Privacy Extensions
[ 0.901284] lib80211: common routines for IEEE802.11 drivers
[ 0.901287] lib80211_crypt: registered algorithm 'NULL'
[ 0.901397] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6
[ 0.909593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.112011] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.250147] usb 1-2: New USB device found, idVendor=0471, idProduct=2034
[ 1.250151] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.250154] usb 1-2: Product: USB Video Camera
[ 1.250215] usb 1-2: configuration #1 chosen from 1 choice
[ 1.720931] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 1.783418] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 1.788193] PM: Resume from disk failed.
[ 1.788208] registered taskstats version 1
[ 1.788353] Magic number: 2:41:701
[ 1.788388] pci 0000:00:00.6: hash matches
[ 1.788443] rtc_cmos 00:09: setting system clock to 2010-03-24 20:39:57 UTC (1269463197)
[ 1.788534] Freeing unused kernel memory: 1024k freed
[ 1.789016] Write protecting the kernel read-only data: 8920k
[ 1.830428] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.830442] ACPI: Thermal Zone [THRM] (65 C)
[ 1.834738] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.834788] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.834871] scsi0 : pata_amd
[ 1.834971] scsi1 : pata_amd
[ 1.835862] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 1.835865] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.016309] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
[ 2.016336] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12)
[ 2.048256] ata1.00: configured for MWDMA2
[ 2.057204] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
[ 2.057362] ata2: port disabled. ignoring.
[ 2.063612] sata_nv 0000:00:0e.0: version 3.5
[ 2.063627] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.064087] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 2.064093] alloc irq_desc for 23 on node 0
[ 2.064095] alloc kstat_irqs on node 0
[ 2.064108] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
[ 2.064112] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.064177] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 2.064305] scsi2 : sata_nv
[ 2.064378] scsi3 : sata_nv
[ 2.064573] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
[ 2.064577] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
[ 2.532038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.583974] ata3.00: ATA-8: WDC WD2500BEVS-22VAT0, 11.01A11, max UDMA/133
[ 2.583978] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.600722] ata3.00: configured for UDMA/133
[ 2.600834] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 11.0 PQ: 0 ANSI: 5
[ 2.601014] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.601067] sd 2:0:0:0: [sda] Write Protect is off
[ 2.601071] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.601099] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.601235] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 2.638103] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.922597] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.941795] Uniform Multi-Platform E-IDE driver
[ 2.952150] processor LNXCPU:00: registered as cooling_device0
[ 2.965858] udev: starting version 146
[ 3.874248] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 3.874253] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 3.874258] PM: Marking nosave pages: 00000000abf00000 - 0000000100000000
[ 3.875650] PM: Marking nosave pages: 0000000020000000 - 0000000024000000
[ 3.878224] PM: Basic memory bitmaps created
[ 3.908207] PM: Basic memory bitmaps freed
[ 3.919253] PM: Starting manual resume from disk
[ 3.919257] PM: Resume from partition 8:6
[ 3.919259] PM: Checking hibernation image.
[ 3.919508] PM: Resume from disk failed.
[ 4.149656] kjournald starting. Commit interval 15 seconds
[ 4.149948] EXT3 FS on sda3, internal journal
[ 4.149953] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.253748] udev: starting version 146
[ 9.392511] ACPI: AC Adapter [ACAD] (off-line)
[ 9.495129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.495180] ACPI: Power Button [PWRF]
[ 9.756803] ACPI: Battery Slot [BAT0] (battery present)
[ 9.756970] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 9.757026] ACPI: Power Button [PWRB]
[ 9.757092] ACPI: WMI: Mapper loaded
[ 9.757145] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 9.757177] ACPI: Sleep Button [SLPB]
[ 9.757230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 9.781508] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.997843] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 9.997879] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 10.021612] ACPI: Lid Switch [LID]
[ 10.028987] acpi device:24: registered as cooling_device1
[ 10.029164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input7
[ 10.029219] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 10.097704] EDAC MC: Ver: 2.1.0 Mar 17 2010
[ 10.104863] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.395954] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 10.396448] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 10.396454] alloc irq_desc for 20 on node 0
[ 10.396456] alloc kstat_irqs on node 0
[ 10.396470] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
[ 10.396476] forcedeth 0000:00:14.0: setting latency timer to 64
[ 10.396566] nv_probe: set workaround bit for reversed mac addr
[ 10.525913] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.525919] Uniform CD-ROM driver Revision: 3.20
[ 10.526050] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 10.917121] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:46:32:75
[ 10.917126] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
[ 10.917261] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 10.917282] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 11.805758] nvidia: module license 'NVIDIA' taints kernel.
[ 11.805763] Disabling lock debugging due to kernel taint
[ 12.062588] nvidia 0000:00:05.0: power state changed by ACPI to D0
[ 12.063019] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
[ 12.063025] alloc irq_desc for 18 on node 0
[ 12.063028] alloc kstat_irqs on node 0
[ 12.063042] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18
[ 12.063049] nvidia 0000:00:05.0: setting latency timer to 64
[ 12.063371] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009
[ 12.111454] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 12.111462] alloc irq_desc for 19 on node 0
[ 12.111465] alloc kstat_irqs on node 0
[ 12.111479] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19
[ 12.111489] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 12.168086] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 12.189781] EDAC amd64_edac: Ver: 3.2.0 Mar 17 2010
[ 12.189863] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 12.189867] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 12.189870] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 12.189872] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 12.189874] Might be a BIOS bug, if BIOS says ECC is enabled
[ 12.189875] Use of the override can cause unknown side effects.
[ 12.189902] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 12.251836] Linux video capture interface: v2.00
[ 12.448704] usbcore: registered new interface driver snd-usb-audio
[ 12.556781] cfg80211: Calling CRDA to update world regulatory domain
[ 12.566212] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.566219] alloc irq_desc for 21 on node 0
[ 12.566222] alloc kstat_irqs on node 0
[ 12.566236] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
[ 12.566312] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 12.638824] uvcvideo: Found UVC 1.00 device USB Video Camera (0471:2034)
[ 12.641244] input: USB Video Camera as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2:1.0/input/input8
[ 12.641306] usbcore: registered new interface driver uvcvideo
[ 12.641311] USB Video Class driver (v0.1.0)
[ 12.855616] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 13.369494] phy0: Selected rate control algorithm 'minstrel'
[ 13.370316] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
[ 13.571221] Adding 2104444k swap on /dev/sda6. Priority:-1 extents:1 across:2104444k
[ 14.954197] device-mapper: uevent: version 1.0.3
[ 14.956661] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 15.865181] loop: module loaded
[ 16.147026] fuse init (API version 7.12)
[ 16.844714] kjournald starting. Commit interval 15 seconds
[ 16.845634] EXT3 FS on sda5, internal journal
[ 16.845639] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.921729] kjournald starting. Commit interval 15 seconds
[ 16.922143] EXT3 FS on sda4, internal journal
[ 16.922149] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.032807] kjournald starting. Commit interval 15 seconds
[ 17.033193] EXT3 FS on sda7, internal journal
[ 17.033199] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.646443] type=1505 audit(1269474015.355:2): operation="profile_load" pid=1125 name=/bin/ping
[ 19.682282] type=1505 audit(1269474015.391:3): operation="profile_load" pid=1126 name=/sbin/klogd
[ 19.756232] type=1505 audit(1269474015.467:4): operation="profile_load" pid=1127 name=/sbin/syslog-ng
[ 19.826500] type=1505 audit(1269474015.535:5): operation="profile_load" pid=1128 name=/sbin/syslogd
[ 19.899561] type=1505 audit(1269474015.607:6): operation="profile_load" pid=1129 name=/usr/sbin/avahi-daemon
[ 19.968373] type=1505 audit(1269474015.679:7): operation="profile_load" pid=1130 name=/usr/sbin/identd
[ 20.035605] type=1505 audit(1269474015.743:8): operation="profile_load" pid=1131 name=/usr/sbin/mdnsd
[ 20.114179] type=1505 audit(1269474015.823:9): operation="profile_load" pid=1132 name=/usr/sbin/nscd
[ 20.217839] type=1505 audit(1269474015.927:10): operation="profile_load" pid=1133 name=/usr/sbin/ntpd
[ 20.281895] type=1505 audit(1269474015.991:11): operation="profile_load" pid=1134 name=/usr/sbin/traceroute
[ 21.334219] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.641340] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.735555] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.821462] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.20.00)
[ 32.821529] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
[ 32.821535] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
[ 32.821541] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12
[ 32.821548] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 32.828249] Marking TSC unstable due to cpufreq changes
[ 33.500051] Clocksource tsc unstable (delta = -299988508 ns)
[ 39.644163] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 48.290234] eth0: no link during initialization.
[ 48.299207] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.344162] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 48.436695] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 48.445866] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 48.454265] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 48.580027] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 48.674874] Registered led device: b43-phy0::tx
[ 48.674930] Registered led device: b43-phy0::rx
[ 48.674990] Registered led device: b43-phy0::radio
[ 48.695342] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.319699] NET: Registered protocol family 17
[ 110.124685] wlan0: authenticate with AP 00:1b:2f:e5:39:88
[ 110.126235] wlan0: authenticated
[ 110.126247] wlan0: associate with AP 00:1b:2f:e5:39:88
[ 110.128588] wlan0: RX AssocResp from 00:1b:2f:e5:39:88 (capab=0x431 status=0 aid=1)
[ 110.128599] wlan0: associated
[ 110.131692] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 111.165303] Intel AES-NI instructions are not detected.
[ 111.276518] padlock: VIA PadLock not detected.
[ 120.788018] wlan0: no IPv6 routers present
[ 121.060274] RPC: Registered udp transport module.
[ 121.060286] RPC: Registered tcp transport module.
[ 121.534010] Slow work thread pool: Starting up
[ 121.536543] Slow work thread pool: Ready
[ 121.536690] FS-Cache: Loaded
[ 121.924953] FS-Cache: Netfs 'nfs' registered for caching
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.12-0.2-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2010-03-16 21:25:39 +0100
[ 0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000abf00000 (usable)
[ 0.000000] BIOS-e820: 00000000abf00000 - 00000000abf15000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000abf15000 - 00000000abf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000abf80000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF8000000 write-back
[ 0.000000] 3 base 00A8000000 mask FFFC000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000150000000 aka 5376M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ac000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xabf00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000abf00000 (usable)
[ 0.000000] modified: 00000000abf00000 - 00000000abf15000 (ACPI data)
[ 0.000000] modified: 00000000abf15000 - 00000000abf80000 (ACPI NVS)
[ 0.000000] modified: 00000000abf80000 - 00000000b0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000abf00000
[ 0.000000] 0000000000 - 00abe00000 page 2M
[ 0.000000] 00abe00000 - 00abf00000 page 4k
[ 0.000000] kernel direct mapping tables up to abf00000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000150000000
[ 0.000000] 0100000000 - 0150000000 page 2M
[ 0.000000] kernel direct mapping tables up to 150000000 @ b000-12000
[ 0.000000] RAMDISK: 37909000 - 37fef319
[ 0.000000] Compaq Presario V6000: using 0xed I/O delay port
[ 0.000000] ACPI: RSDP 00000000000f88f0 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 00000000abf0bc24 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000abf14c15 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 00000000abf0bc64 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000abf15fc0 00040
[ 0.000000] ACPI: SSDT 00000000abf14c89 00115 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000abf14d9e 0003C (v01 HP MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000abf14dda 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 00000000abf14e12 00050 (v01 HP APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000abf14e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000abf14e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000150000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000024fff]
[ 0.000000] bootmap [0000000000025000 - 000000000004efff] pages 2a
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001c718b0] TEXT DATA BSS ==> [0001000000 - 0001c718b0]
[ 0.000000] #3 [0037909000 - 0037fef319] RAMDISK ==> [0037909000 - 0037fef319]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001c72000 - 0001c7217c] BRK ==> [0001c72000 - 0001c7217c]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f8920] f8920
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880001e00000-ffff8800057fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00150000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000abf00
[ 0.000000] 0: 0x00100000 -> 0x00150000
[ 0.000000] On node 0 totalpages: 1031832
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3830 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 685880 pages, LIFO batch:31
[ 0.000000] Normal zone: 4480 pages used for memmap
[ 0.000000] Normal zone: 323200 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000abf00000 - 00000000abf15000
[ 0.000000] PM: Registered nosave memory: 00000000abf15000 - 00000000abf80000
[ 0.000000] PM: Registered nosave memory: 00000000abf80000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff88000584a000, static data 82912 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012910
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part3 repair=1 resume=/dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2fd8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 3981976k/5505024k available (5507k kernel code, 1377696k absent, 145352k reserved, 4539k data, 1024k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2009.425 MHz processor.
[ 0.000014] spurious 8259A interrupt: IRQ7.
[ 0.000100] Console: colour dummy device 80x25
[ 0.000104] console [tty0] enabled
[ 0.000322] hpet clockevent registered
[ 0.000326] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.85 BogoMIPS (lpj=8037700)
[ 0.006017] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.006130] Security Framework initialized
[ 0.006151] AppArmor: AppArmor initialized
[ 0.007504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010041] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011371] Mount-cache hash table entries: 256
[ 0.011537] Initializing cgroup subsys ns
[ 0.011542] Initializing cgroup subsys cpuacct
[ 0.011546] Initializing cgroup subsys memory
[ 0.011564] Initializing cgroup subsys devices
[ 0.011566] Initializing cgroup subsys freezer
[ 0.011569] Initializing cgroup subsys net_cls
[ 0.011596] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.011598] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.011602] CPU 0/0x0 -> Node 0
[ 0.011604] tseg: 00abf80000
[ 0.011608] mce: CPU supports 5 MCE banks
[ 0.011618] using C1E aware idle routine
[ 0.011620] Performance Counters: AMD PMU driver.
[ 0.011625] ... version: 0
[ 0.011627] ... bit width: 48
[ 0.011629] ... generic counters: 4
[ 0.011631] ... value mask: 0000ffffffffffff
[ 0.011633] ... max period: 00007fffffffffff
[ 0.011635] ... fixed-purpose counters: 0
[ 0.011637] ... counter mask: 000000000000000f
[ 0.011651] SMP alternatives: switching to UP code
[ 0.022049] Freeing SMP alternatives: 34k freed
[ 0.022087] ACPI: Core revision 20090521
[ 0.036078] Setting APIC routing to flat
[ 0.036613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077919] CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (4018.85 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] devtmpfs: initialized
[ 0.080939] Booting paravirtualized kernel on bare hardware
[ 0.081166] regulator: core version 0.5
[ 0.081197] Time: 20:27:59 Date: 03/24/10
[ 0.081265] NET: Registered protocol family 16
[ 0.081417] node 0 link 0: io port [1000, fffff]
[ 0.081421] TOM: 00000000b0000000 aka 2816M
[ 0.081424] node 0 link 0: mmio [e0000000, efffffff]
[ 0.081428] node 0 link 0: mmio [a0000, bffff]
[ 0.081431] node 0 link 0: mmio [b0000000, fe0bffff]
[ 0.081434] TOM2: 0000000150000000 aka 5376M
[ 0.081437] bus: [00,ff] on node 0 link 0
[ 0.081440] bus: 00 index 0 io port: [0, ffff]
[ 0.081442] bus: 00 index 1 mmio: [b0000000, ffffffff]
[ 0.081445] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.081447] bus: 00 index 3 mmio: [150000000, fcffffffff]
[ 0.081456] ACPI: bus type pci registered
[ 0.081531] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6
[ 0.081534] PCI: MCFG area at e0000000 reserved in E820
[ 0.081872] PCI: Using MMCONFIG at e0000000 - e06fffff
[ 0.081875] PCI: Using configuration type 1 for base access
[ 0.082872] bio: create slab <bio-0> at 0
[ 0.084533] ACPI: EC: Look up EC in DSDT
[ 0.089578] ACPI: BIOS _OSI(Linux) query ignored
[ 0.090156] ACPI: Interpreter enabled
[ 0.090163] ACPI: (supports S0 S3 S4 S5)
[ 0.090192] ACPI: Using IOAPIC for interrupt routing
[ 0.090749] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.113310] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.113314] ACPI: EC: driver started in interrupt mode
[ 0.113773] ACPI: No dock devices found.
[ 0.113946] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.114261] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114265] pci 0000:00:02.0: PME# disabled
[ 0.114304] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114308] pci 0000:00:03.0: PME# disabled
[ 0.114332] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff]
[ 0.114339] pci 0000:00:05.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.114345] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff]
[ 0.114352] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.114545] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f]
[ 0.114612] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f]
[ 0.114618] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f]
[ 0.114645] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.114651] pci 0000:00:0a.1: PME# disabled
[ 0.114686] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff]
[ 0.114787] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff]
[ 0.114825] pci 0000:00:0b.0: supports D1 D2
[ 0.114828] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114833] pci 0000:00:0b.0: PME# disabled
[ 0.114866] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff]
[ 0.114903] pci 0000:00:0b.1: supports D1 D2
[ 0.114906] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114910] pci 0000:00:0b.1: PME# disabled
[ 0.114955] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f]
[ 0.115004] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7]
[ 0.115010] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7]
[ 0.115015] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf]
[ 0.115021] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3]
[ 0.115027] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f]
[ 0.115032] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff]
[ 0.115132] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff]
[ 0.115170] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.115174] pci 0000:00:10.1: PME# disabled
[ 0.115212] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff]
[ 0.115218] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7]
[ 0.115245] pci 0000:00:14.0: supports D1 D2
[ 0.115247] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.115251] pci 0000:00:14.0: PME# disabled
[ 0.115393] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff]
[ 0.115397] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff]
[ 0.115401] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff]
[ 0.115436] pci 0000:03:00.0: reg 10 32bit mmio: [0xb6000000-0xb6003fff]
[ 0.115485] pci 0000:03:00.0: supports D1 D2
[ 0.115507] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.115573] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff]
[ 0.115621] pci 0000:00:10.0: transparent bridge
[ 0.115638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.115792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.115858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.115912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.164829] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
[ 0.165106] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.165380] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.165654] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.165928] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.166202] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.166476] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
[ 0.166750] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.167023] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.167295] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
[ 0.167568] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
[ 0.167840] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.168123] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.168396] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
[ 0.168672] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
[ 0.168948] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
[ 0.169222] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
[ 0.169508] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[ 0.169791] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
[ 0.170039] SCSI subsystem initialized
[ 0.170116] libata version 3.00 loaded.
[ 0.170204] usbcore: registered new interface driver usbfs
[ 0.170226] usbcore: registered new interface driver hub
[ 0.170254] usbcore: registered new device driver usb
[ 0.170335] PCI: Using ACPI for IRQ routing
[ 0.170699] PCI-DMA: Disabling AGP.
[ 0.170789] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.170791] PCI-DMA: using GART IOMMU.
[ 0.170796] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.171306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.171314] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.177397] AppArmor: AppArmor Filesystem Enabled
[ 0.177417] pnp: PnP ACPI init
[ 0.177437] ACPI: bus type pnp registered
[ 0.181786] pnp: PnP ACPI: found 13 devices
[ 0.181789] ACPI: ACPI bus type pnp unregistered
[ 0.181802] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.181811] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.181815] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.181819] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.181823] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.181830] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.181837] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.181840] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 0.181844] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 0.181847] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 0.181850] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 0.181854] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 0.181857] system 00:04: ioport range 0x2000-0x203f has been reserved
[ 0.181864] system 00:05: ioport range 0x360-0x361 has been reserved
[ 0.181867] system 00:05: ioport range 0x380-0x383 has been reserved
[ 0.181871] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.186666] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.186670] pci 0000:00:02.0: IO window: 0x4000-0x4fff
[ 0.186674] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff
[ 0.186678] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff
[ 0.186683] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.186686] pci 0000:00:03.0: IO window: disabled
[ 0.186689] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff
[ 0.186693] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.186696] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07
[ 0.186698] pci 0000:00:10.0: IO window: disabled
[ 0.186702] pci 0000:00:10.0: MEM window: disabled
[ 0.186706] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.186716] pci 0000:00:02.0: setting latency timer to 64
[ 0.186722] pci 0000:00:03.0: setting latency timer to 64
[ 0.186728] pci 0000:00:10.0: setting latency timer to 64
[ 0.186733] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.186736] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.186739] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
[ 0.186742] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff]
[ 0.186745] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff]
[ 0.186748] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff]
[ 0.186752] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.186755] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.186833] NET: Registered protocol family 2
[ 0.187031] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.188784] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.193475] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.194057] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.194061] TCP reno registered
[ 0.194195] NET: Registered protocol family 1
[ 0.194270] Unpacking initramfs...
[ 0.336511] Freeing initrd memory: 7064k freed
[ 0.340338] Simple Boot Flag at 0x36 set to 0x1
[ 0.340590] Scanning for low memory corruption every 60 seconds
[ 0.340788] audit: initializing netlink socket (disabled)
[ 0.340804] type=2000 audit(1269462479.339:1): initialized
[ 0.349429] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.349567] VFS: Disk quotas dquot_6.5.2
[ 0.349605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.349763] msgmni has been set to 1947
[ 0.349873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.349876] io scheduler noop registered
[ 0.349878] io scheduler anticipatory registered
[ 0.349881] io scheduler deadline registered
[ 0.349899] io scheduler cfq registered (default)
[ 0.350001] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.350007] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.350050] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.350078] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.350085] pci 0000:00:05.0: Boot video device
[ 0.564027] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.564085] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.564146] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.564321] alloc irq_desc for 24 on node 0
[ 0.564323] alloc kstat_irqs on node 0
[ 0.564334] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.564340] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.564458] alloc irq_desc for 25 on node 0
[ 0.564461] alloc kstat_irqs on node 0
[ 0.564467] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.564472] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.564557] pci-stub: invalid id string ""
[ 0.564762] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001800000, using 3072k, total 65536k
[ 0.564766] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.564768] vesafb: scrolling: redraw
[ 0.564771] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.564970] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.578891] bootsplash: silentjpeg size 91628 bytes
[ 0.595005] bootsplash: ...found (1024x768, 50700 bytes, v3).
[ 0.651276] Console: switching to colour frame buffer device 124x44
[ 0.703932] Switched to high resolution mode on CPU 0
[ 0.707309] fb0: VESA VGA frame buffer device
[ 0.709126] Non-volatile memory driver v1.3
[ 0.709129] Linux agpgart interface v0.103
[ 0.709133] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.709640] Fixed MDIO Bus: probed
[ 0.709648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.710156] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.710162] alloc irq_desc for 22 on node 0
[ 0.710165] alloc kstat_irqs on node 0
[ 0.710177] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
[ 0.710197] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.710200] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.710236] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.710280] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.710285] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.710312] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
[ 0.720010] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.720037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.720040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.720043] usb usb1: Product: EHCI Host Controller
[ 0.720046] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-default ehci_hcd
[ 0.720048] usb usb1: SerialNumber: 0000:00:0b.1
[ 0.720135] usb usb1: configuration #1 chosen from 1 choice
[ 0.720169] hub 1-0:1.0: USB hub found
[ 0.720178] hub 1-0:1.0: 8 ports detected
[ 0.720283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720758] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.720764] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
[ 0.720784] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.720788] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.720799] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.720816] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
[ 0.778022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778028] usb usb2: Product: OHCI Host Controller
[ 0.778030] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-default ohci_hcd
[ 0.778033] usb usb2: SerialNumber: 0000:00:0b.0
[ 0.778110] usb usb2: configuration #1 chosen from 1 choice
[ 0.778139] hub 2-0:1.0: USB hub found
[ 0.778150] hub 2-0:1.0: 8 ports detected
[ 0.778237] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.778282] Initializing USB Mass Storage driver...
[ 0.778306] usbcore: registered new interface driver usb-storage
[ 0.778309] USB Mass Storage support registered.
[ 0.778332] usbcore: registered new interface driver libusual
[ 0.778344] usbcore: registered new interface driver ums-alauda
[ 0.778357] usbcore: registered new interface driver ums-cypress
[ 0.778369] usbcore: registered new interface driver ums-datafab
[ 0.778381] usbcore: registered new interface driver ums-freecom
[ 0.778393] usbcore: registered new interface driver ums-isd200
[ 0.778405] usbcore: registered new interface driver ums-jumpshot
[ 0.778418] usbcore: registered new interface driver ums-karma
[ 0.778430] usbcore: registered new interface driver ums-onetouch
[ 0.778444] usbcore: registered new interface driver ums-sddr09
[ 0.778456] usbcore: registered new interface driver ums-sddr55
[ 0.778469] usbcore: registered new interface driver ums-usbat
[ 0.778514] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.795995] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.796007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.796075] mice: PS/2 mouse device common for all mice
[ 0.797027] rtc_cmos 00:09: RTC can wake from S4
[ 0.797075] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.797115] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.797127] cpuidle: using governor ladder
[ 0.797129] cpuidle: using governor menu
[ 0.797431] usbcore: registered new interface driver hiddev
[ 0.797445] usbcore: registered new interface driver usbhid
[ 0.797448] usbhid: v2.6:USB HID core driver
[ 0.896752] TCP cubic registered
[ 0.896817] NET: Registered protocol family 10
[ 0.897337] lo: Disabled Privacy Extensions
[ 0.897734] lib80211: common routines for IEEE802.11 drivers
[ 0.897737] lib80211_crypt: registered algorithm 'NULL'
[ 0.897848] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD2500BEVS-22VAT0_WD-WXEX08TFF875-part6
[ 0.906378] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.706188] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 1.770340] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 1.774861] PM: Resume from disk failed.
[ 1.774879] registered taskstats version 1
[ 1.775024] Magic number: 2:832:498
[ 1.775111] rtc_cmos 00:09: setting system clock to 2010-03-24 20:28:01 UTC (1269462481)
[ 1.775192] Freeing unused kernel memory: 1024k freed
[ 1.775675] Write protecting the kernel read-only data: 8920k
[ 1.816300] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.816312] ACPI: Thermal Zone [THRM] (36 C)
[ 1.820613] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.820663] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.820746] scsi0 : pata_amd
[ 1.820845] scsi1 : pata_amd
[ 1.821746] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 1.821749] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.000311] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH16, max MWDMA2
[ 2.000339] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc700) ACPI=0x39f (120:600:0x12)
[ 2.032257] ata1.00: configured for MWDMA2
[ 2.048895] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH16 PQ: 0 ANSI: 5
[ 2.049060] ata2: port disabled. ignoring.
[ 2.055290] sata_nv 0000:00:0e.0: version 3.5
[ 2.055305] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.055734] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 2.055740] alloc irq_desc for 23 on node 0
[ 2.055742] alloc kstat_irqs on node 0
[ 2.055755] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
[ 2.055759] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.055826] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 2.055949] scsi2 : sata_nv
[ 2.056056] scsi3 : sata_nv
[ 2.056253] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
[ 2.056258] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
[ 2.524038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.573244] ata3.00: ATA-8: WDC WD2500BEVS-22VAT0, 11.01A11, max UDMA/133
[ 2.573248] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.589005] ata3.00: configured for UDMA/133
[ 2.589116] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 11.0 PQ: 0 ANSI: 5
[ 2.589294] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.589348] sd 2:0:0:0: [sda] Write Protect is off
[ 2.589351] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.589379] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.589516] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 2.627363] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.910597] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.929767] Uniform Multi-Platform E-IDE driver
[ 2.940062] processor LNXCPU:00: registered as cooling_device0
[ 2.953725] udev: starting version 146
[ 3.811463] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 3.811469] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 3.811473] PM: Marking nosave pages: 00000000abf00000 - 0000000100000000
[ 3.812922] PM: Marking nosave pages: 0000000020000000 - 0000000024000000
[ 3.813169] PM: Basic memory bitmaps created
[ 3.841464] PM: Basic memory bitmaps freed
[ 3.853209] PM: Starting manual resume from disk
[ 3.853213] PM: Resume from partition 8:6
[ 3.853215] PM: Checking hibernation image.
[ 3.853463] PM: Resume from disk failed.
[ 4.082956] kjournald starting. Commit interval 15 seconds
[ 4.083243] EXT3 FS on sda3, internal journal
[ 4.083249] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.322651] udev: starting version 146
[ 9.537827] ACPI: WMI: Mapper loaded
[ 9.652249] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 9.652286] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.658628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.658680] ACPI: Power Button [PWRF]
[ 9.658743] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 9.658774] ACPI: Power Button [PWRB]
[ 9.658826] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 9.658858] ACPI: Sleep Button [SLPB]
[ 9.658911] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 9.667441] ACPI: Lid Switch [LID]
[ 9.989101] ACPI: Battery Slot [BAT0] (battery present)
[ 10.081264] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.252751] ACPI: AC Adapter [ACAD] (off-line)
[ 10.256582] acpi device:24: registered as cooling_device1
[ 10.256754] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input7
[ 10.256807] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 10.278592] EDAC MC: Ver: 2.1.0 Mar 17 2010
[ 11.479245] nvidia: module license 'NVIDIA' taints kernel.
[ 11.479251] Disabling lock debugging due to kernel taint
[ 11.735246] nvidia 0000:00:05.0: power state changed by ACPI to D0
[ 11.735671] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
[ 11.735677] alloc irq_desc for 18 on node 0
[ 11.735680] alloc kstat_irqs on node 0
[ 11.735694] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18
[ 11.735702] nvidia 0000:00:05.0: setting latency timer to 64
[ 11.736064] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009
[ 11.745279] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 11.745301] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 11.950528] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 11.951065] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 11.951071] alloc irq_desc for 20 on node 0
[ 11.951074] alloc kstat_irqs on node 0
[ 11.951087] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
[ 11.951093] forcedeth 0000:00:14.0: setting latency timer to 64
[ 11.951161] nv_probe: set workaround bit for reversed mac addr
[ 12.203421] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 12.203431] alloc irq_desc for 19 on node 0
[ 12.203434] alloc kstat_irqs on node 0
[ 12.203449] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19
[ 12.203458] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 12.222276] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.222283] Uniform CD-ROM driver Revision: 3.20
[ 12.222407] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 12.227771] EDAC amd64_edac: Ver: 3.2.0 Mar 17 2010
[ 12.262086] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 12.399863] cfg80211: Calling CRDA to update world regulatory domain
[ 12.469728] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:46:32:75
[ 12.469733] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
[ 12.475567] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 12.479804] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 12.479809] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 12.479813] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 12.479815] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 12.479817] Might be a BIOS bug, if BIOS says ECC is enabled
[ 12.479818] Use of the override can cause unknown side effects.
[ 12.479841] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 12.480831] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.480838] alloc irq_desc for 21 on node 0
[ 12.480840] alloc kstat_irqs on node 0
[ 12.480854] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
[ 12.480922] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 12.606573] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 13.078693] phy0: Selected rate control algorithm 'minstrel'
[ 13.079522] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
[ 13.324761] Adding 2104444k swap on /dev/sda6. Priority:-1 extents:1 across:2104444k
[ 14.062527] device-mapper: uevent: version 1.0.3
[ 14.062934] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 15.060429] loop: module loaded
[ 15.388591] fuse init (API version 7.12)
[ 16.130588] kjournald starting. Commit interval 15 seconds
[ 16.131139] EXT3 FS on sda5, internal journal
[ 16.131145] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.218716] kjournald starting. Commit interval 15 seconds
[ 16.219092] EXT3 FS on sda4, internal journal
[ 16.219098] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.285334] kjournald starting. Commit interval 15 seconds
[ 16.285685] EXT3 FS on sda7, internal journal
[ 16.285690] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.079655] type=1505 audit(1269473298.800:2): operation="profile_load" pid=1073 name=/bin/ping
[ 19.116202] type=1505 audit(1269473298.840:3): operation="profile_load" pid=1074 name=/sbin/klogd
[ 19.188578] type=1505 audit(1269473298.912:4): operation="profile_load" pid=1075 name=/sbin/syslog-ng
[ 19.261448] type=1505 audit(1269473298.984:5): operation="profile_load" pid=1076 name=/sbin/syslogd
[ 19.338306] type=1505 audit(1269473299.060:6): operation="profile_load" pid=1077 name=/usr/sbin/avahi-daemon
[ 19.403815] type=1505 audit(1269473299.124:7): operation="profile_load" pid=1078 name=/usr/sbin/identd
[ 19.471943] type=1505 audit(1269473299.192:8): operation="profile_load" pid=1079 name=/usr/sbin/mdnsd
[ 19.548382] type=1505 audit(1269473299.272:9): operation="profile_load" pid=1080 name=/usr/sbin/nscd
[ 19.656877] type=1505 audit(1269473299.380:10): operation="profile_load" pid=1081 name=/usr/sbin/ntpd
[ 19.719214] type=1505 audit(1269473299.440:11): operation="profile_load" pid=1082 name=/usr/sbin/traceroute
[ 20.819337] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.126327] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.201488] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.899880] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.20.00)
[ 32.899946] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
[ 32.899953] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
[ 32.899960] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x12
[ 32.899967] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 33.000241] Marking TSC unstable due to cpufreq changes
[ 33.500026] Clocksource tsc unstable (delta = -289817672 ns)
[ 39.088344] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 47.278839] eth0: no link during initialization.
[ 47.280892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.332090] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 47.369963] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 47.413378] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 47.456700] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 47.600361] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 47.672493] Registered led device: b43-phy0::tx
[ 47.672519] Registered led device: b43-phy0::rx
[ 47.672543] Registered led device: b43-phy0::radio
[ 47.685141] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.939175] NET: Registered protocol family 17
[ 112.718106] wlan0: authenticate with AP 00:1b:2f:e5:39:88
[ 112.723237] wlan0: authenticated
[ 112.723250] wlan0: associate with AP 00:1b:2f:e5:39:88
[ 112.728644] wlan0: RX AssocResp from 00:1b:2f:e5:39:88 (capab=0x431 status=0 aid=1)
[ 112.728656] wlan0: associated
[ 112.731420] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 113.437578] Intel AES-NI instructions are not detected.
[ 113.638499] padlock: VIA PadLock not detected.
[ 123.248013] wlan0: no IPv6 routers present
[ 127.162688] RPC: Registered udp transport module.
[ 127.162701] RPC: Registered tcp transport module.
[ 127.209216] Slow work thread pool: Starting up
[ 127.209826] Slow work thread pool: Ready
[ 127.209889] FS-Cache: Loaded
[ 127.256931] FS-Cache: Netfs 'nfs' registered for caching
[ 312.496038] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.2 DST=204.152.191.39 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=40656 DF PROTO=TCP SPT=36439 DPT=80 WINDOW=724 RES=0x00 ACK FIN URGP=0 OPT (0101080A00000C340311E2C2)
[ 343.764067] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.2 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54883 DF PROTO=TCP SPT=52505 DPT=80 WINDOW=266 RES=0x00 ACK FIN URGP=0 OPT (0101080A00002ABD141BB3A7)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31.12-0.2-default ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:0b.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Bus 001 Device 002: ID 0471:2034 Philips Webcam SPC530NC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0471 Philips
idProduct 0x2034 Webcam SPC530NC
bcdDevice 0.00
iManufacturer 0
iProduct 1 USB Video Camera
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 422
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 98mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 1 USB Video Camera
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 1 USB Video Camera
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 77
dwClockFrequency 48.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x00000000
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 3
bSourceID 1
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000157b
Brightness
Contrast
Saturation
Sharpness
Gamma
White Balance Temperature
Backlight Compensation
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
bmVideoStandards 0x1a
NTSC - 525/60
SECAM - 625/50
NTSC - 625/50
VideoControl Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 6
guidExtensionCode {d2090058-6fe7-2446-8512-76cdd8dda14e}
bNumControl 2
bNrPins 1
baSourceID( 0) 3
bControlSize 1
bmControls( 0) 0x03
iExtension 0
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 2
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 6
iTerminal 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 157
bEndPointAddress 131
bmInfo 0
bTerminalLink 2
bStillCaptureMethod 1
bTriggerSupport 1
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 2
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 54
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x01
Still image supported
wWidth 640
wHeight 480
dwMinBitRate 1179648000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 7
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 499998
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 999996
dwFrameInterval( 5) 1333332
dwFrameInterval( 6) 1999992
VideoStreaming Interface Descriptor:
bLength 62
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x01
Still image supported
wWidth 320
wHeight 240
dwMinBitRate 1179648000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 166666
bFrameIntervalType 9
dwFrameInterval( 0) 166666
dwFrameInterval( 1) 200000
dwFrameInterval( 2) 333333
dwFrameInterval( 3) 400000
dwFrameInterval( 4) 499998
dwFrameInterval( 5) 666666
dwFrameInterval( 6) 999996
dwFrameInterval( 7) 1333332
dwFrameInterval( 8) 1999992
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 1 Audio
bFunctionSubClass 2 Streaming
bFunctionProtocol 0
iFunction 1 USB Video Camera
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 1 USB Video Camera
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 38
bInCollection 1
baInterfaceNr( 0) 3
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0000
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 5
bSourceID 3
bControlSize 1
bmaControls( 0) 0x43
Mute
Volume
Automatic Gain
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 4
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 5
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 4
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 29
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 7 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 16000
tSamFreq[ 3] 22050
tSamFreq[ 4] 32000
tSamFreq[ 5] 44100
tSamFreq[ 6] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.31.12-0.2-default ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:0b.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled

Attachment: signature.asc
Description: Questa =?ISO-8859-1?Q?=E8?= una parte del messaggio firmata digitalmente

Relevant Pages

  • 2.6.33-rc1 unusable due to scheduler issues, circular locking, WARNs and BUGs
    ... Initializing cgroup subsys cpuset ... NX protection missing in CPU or disabled in BIOS! ... ACPI: PM-Timer IO Port: 0x920 ... Booting paravirtualized kernel on bare hardware ...
    (Linux-Kernel)
  • 2.6.28.3 ext4 ooops
    ... On newly formatted ext4 usb disk I noticed data corruption after copying ... Initializing cgroup subsys cpuset ... ACPI: Local APIC address 0xfee00000 ... # CPUFreq processor drivers ...
    (Linux-Kernel)
  • problem with "sched: revert back to per-rq vruntime"?
    ... I have some nice'd tasks that use 100% of the CPU on each core of the Core 2 duo, and killing these tasks make the latency go away. ... Initializing cgroup subsys cpuset ... ACPI: Local APIC address 0xfee00000 ... # Device Drivers ...
    (Linux-Kernel)
  • -tip tree panic
    ... Initializing cgroup subsys cpu ... Using ACPI for SMP configuration information ... # Device Drivers ...
    (Linux-Kernel)
  • Re: My Sid box is lost Module p80211
    ... Initializing cgroup subsys cpuset ... ACPI: Local APIC address 0xfee00000 ... Atom events, Intel PMU driver. ... eth0: no IPv6 routers present ...
    (Debian-User)