Re: [opensuse] Poor routing performance OpenSUSE 11.3
John Andersen wrote:
What are you using for Routing software?
Whatever is in 11.3. I just enable routing. However, as I mentioned in
a later note, I resolved the problem by setting the MTU to 1500. I
don't know why that should make a difference as, according to ifconfig,
it already was by default.
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
Relevant Pages
- Re: [opensuse] Periodic problem resolving URLs?
... No, you must reduce the MTU in the Router only, to a lower number. ... To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx ... For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx ...
(SuSE) - Re: [opensuse] ifcfg-ethx settings in 10.2
... MTU and it defaults to 1500 every time. ... I recall it used to be in ... To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx ... For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx ...
(SuSE) - RE: How do I manually set the MTU on a PPP Connection?
... Subject: Re: How do I manually set the MTU on a PPP Connection? ... > ...when I dial-up using pppd or wvdial... ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ... Trouble? ...
(Debian-User) - Re: iptables to ipfw
... It turns out that openvpn configures tun0 with too small a MTU which causes ... According to RFC 1918, unregistered source ... > as an extra flag to natd ... >> To unsubscribe, send any mail to ...
(freebsd-questions) - Re: aptitude/apt-get hangs during update (plus) on IPv6
... was mentioned my connection to the IPv6 network is via a tunnel and I'm ... The RFCs say that any conforming implementation MUST handle an MTU of 1280, and may not necessarily handle anything larger. ... So it makes sense (if you're going to go to the trouble of setting the MTU in the first place) to use that number. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
(Debian-User) |
|
