[opensuse] Re: Screen Resolution
- From: Wolfgang Mueller <wm@xxxxxxxxxxxxxx>
- Date: Sat, 16 Apr 2011 12:13:28 +0200
On 04/16/11 09:04, Felix Miata wrote:
On 2011/04/16 08:46 (GMT+0200) Wolfgang Mueller composed:
I have installed Suse 11.4 on my new laptop, an Acer Aspire 7551G.
According to Acer's product description the computer has a WSXGA Display
with 1600x900 pixels. My X runs well, but I have the impression that it
uses a smaller resolution than 1600x900.
What size is that screen?
The size of my screen is 17.3".
So I have two questions:
1. How can I determine the resolution used by my X?
1-Load in a web browser
http://fm.no-ip.com/Auth/dpi-screen-window.html and/or
2-Open KInfoCenter -> Xserver and/or
3-'xdpyinfo | grep dime'
2. In case it is lower, how can I force X to use 1600x900 px?
Really hard to answer that without knowing the output of
'lspci | grep vga' and/or output from 'hwinfo --gfxcard'.
"lspci | grep vga" produces no result, but "lspci | grep VGA" shows this line:
02:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour \
[AMD Radeon HD 6470M]
And here follows the response of "hwinfo --gfxcard"
"25: PCI 200.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
Unique ID: B35A.mAJbyLlkeA6
Parent ID: _Znp.XY83zNTsW5E
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: graphics card
Model: "ATI VGA compatible controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x6760
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0388
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
Memory Range: 0xd0000000-0xd001ffff (rw,non-prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xd0040000-0xd005ffff (ro,non-prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00006760sv00001025sd00000388bc03sc00i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)
Primary display adapter: #25
Moreover I list the contents of /etc/X11/xorg.conf
Section "Device"
Identifier "vboxvideo"
Driver "vboxvideo"
EndSection
Section "Screen"
Identifier "vboxvideo"
Device "vboxvideo"
EndSection
Section "Device"
Identifier "vmware"
Driver "vmware"
EndSection
Section "Screen"
Identifier "vmware"
Device "vmware"
EndSection
Section "Device"
Identifier "cirrus"
Driver "cirrus"
EndSection
Section "Screen"
Identifier "cirrus"
Device "cirrus"
EndSection
Section "Device"
Identifier "fbdev"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "fbdev"
Device "fbdev"
EndSection
Section "Device"
Identifier "vesa"
Driver "vesa"
EndSection
Section "Screen"
Identifier "vesa"
Device "vesa"
EndSection
Section "ServerLayout"
Identifier "Layout"
Screen "vboxvideo"
Screen "vmware"
Screen "cirrus"
Screen "fbdev"
Screen "vesa"
EndSection
I hope these data are helpful.
Bye,
Wolfgang
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
- References:
- [opensuse] Screen Resolution
- From: Wolfgang Mueller
- Re: [opensuse] Screen Resolution
- From: Felix Miata
- [opensuse] Screen Resolution
- Prev by Date: Re: [opensuse] Re: Screen Resolution
- Next by Date: [opensuse] Re: Screen Resolution
- Previous by thread: [opensuse] Re: Screen Resolution
- Next by thread: [opensuse] No route to Internet
- Index(es):