Re: [opensuse] opensuse with JMicron JMB362/363 Fake RAID (SoftRAID) driver

LLLActive@xxxxxxx wrote:

@Per: I tried the methods with pata_jmicron and dmraid. They are
loaded, but the so-called HW-Bios setup Raid 10 disk is not seen, only
the seperate disks. I got it working with a Linux Raid.

If I'm not using hardware RAID, I use software RAID (mdraid) - this is
typically where reliability is important, performance less so.



--
Per Jessen, Zürich (13.4°C)

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

Relevant Pages

  • Re: [opensuse] opensuse with JMicron JMB362/363 Fake RAID (SoftRAID) driver
    ... what do you think of a combination or hybrid raid; 2 HW Raid 1's on two separate 3ware 2 port cards and that striped with a ... Still another alternative is some NAS like Qnap TS-410 NAS-System (300 Euro, same as a 3ware card) Any experiences with NAS systems? ... the seperate disks. ...
    (SuSE)
  • Re: MSDTC conflicting articles
    ... 'physical' disk for it due to SAN configurations, ... RAID ... seperate LUNs (and therefore they are seperate disks to the OS), ...
    (microsoft.public.windows.server.clustering)
  • Re: [SLE] RAID mirroring
    ... I have an ASUS KN8 mobo that can do SATA RAID according to ... onto a disk connected to it, with hardware RAID enabled, will almost always ... because "Linux RAID" is a distinct partition type ...
    (SuSE)
  • Re: nVidia Raid vs Linux Software RAID
    ... Linux RAID works, works well and has ... that you can use any disks you like regardless of whether the sizes are ... not even disks at all (I've done md over the network block device in the ...
    (uk.comp.os.linux)
  • Re: [opensuse] swap partition with raid not active
    ... When I look at Linux Raid with webmin it tells me ... The other partitions seem to be fine. ... This is the first Linux Raid I have setup. ... I had the same problem with linux raid and swap. ...
    (SuSE)