[opensuse] making rw esata hotplug

Hello

I use an e-sata docking station.

My problem is that the disks mount ro.

I usually switch off the station, insert the disk and switch on.

The disk is seen and mount

I can make it rw manually, but I need to go root and it's not scalable.

The various disks have of course various names and various /dev/sd mount points.

may be an udev rule?

thanks
jdd

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

Relevant Pages

  • Re: General mount/shadow command?
    ... But referring to the disks without logical names (except in the procedure ... The mount command is different. ... Do not use logicals in the MOUNT command. ... Do use the MOUNT command to create logicals for the volumes. ...
    (comp.os.vms)
  • Summary: System hardware migration best practices
    ... - Is the HDS and EMC storage all SAN-connected? ... disks and data disks. ... On new sys: ... Mount manually one by one to test: ...
    (SunManagers)
  • Summary: System hardware migration best practices
    ... - Is the HDS and EMC storage all SAN-connected? ... disks and data disks. ... On new sys: ... Mount manually one by one to test: ...
    (SunManagers)
  • booting problems
    ... I was able to mirror the two disks (c0t0d0s.. ... boot but it still failed, and resulted the same as mention above. ... I booted from CD and tried to mount the root by ...
    (comp.unix.solaris)
  • booting problems
    ... I was able to mirror the two disks (c0t0d0s.. ... boot but it still failed, and resulted the same as mention above. ... I booted from CD and tried to mount the root by ...
    (comp.unix.questions)