Re: NIC Cards



On 4/30/06, OOzy Pal <oozypal@xxxxxxxxx> wrote:
On 4/30/06, Brendon <brendontoogood@xxxxxxxxx> wrote:
> On Sun, 30 Apr 2006 12:11:49 +0300, you wrote:
>
> > My card is built-in my motherboard is a Gigabyte 915G (81915G Duo).
> > The built-in NIC is NetLink BCM5789 Gigabit Ethernet PCI Express.
> >
> > I have few questions?
> >
> > 1. Anybody know if this NIC compatible with Ubuntu?
> > 2. This card is 10/100/1000 and I have 256K DSL? Does it make a
> > difference if I switch to one of the 10/100 NIC?
> > 3. If item 1 above is OK, how can I install this NIC?
> >
> >
> > Thank you.
> >
> > --
> > OOzy
> i just had a look on the net and found this on the net i am not sure about
> ubuntu but this card seems to work on linux well a different distro
> this is what it said about your nic card
> Broadcom NetLink BCM5789 Gigabit Ethernet - Use Tigon3 tg3 module.
>
> http://hell.jedicoder.net/?p=30
> it won't make difference if you switch to a 10/100 i am running it on that
> and a friend of mine is running a gigabit ethernet card and he can't tell
> the differance between the speed wise so if a 10/100 works i'd say use
> that.
>
> --
>
>
> .....
> brendon
>
> --
> ubuntu-users mailing list
> ubuntu-users@xxxxxxxxxxxxxxxx
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>

I found the driver but it is for the RPM distros.

http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

How can I install it in .deb?
--
OOzy


I tried to follow the installation instruction but I got the following msg

---------------
$ sudo rpm -bb SPECS/tg3.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.27456
+ umask 022
+ cd /usr/src/rpm/BUILD
+ cd /usr/src/rpm/BUILD
+ rm -rf tg3-3.43f
+ /usr/bin/bzip2 -dc /usr/src/rpm/SOURCES/tg3-3.43f.tar.bz2
+ tar -xvvf -
drwxr-xr-x root/root 0 2006-01-09 15:35:22 tg3-3.43f/
-rw-r--r-- root/root 326949 2006-01-09 15:35:22 tg3-3.43f/tg3.c
-rw-r--r-- root/root 90955 2006-01-09 15:35:22 tg3-3.43f/tg3.h
-rw-r--r-- root/root 3099 2006-01-09 15:35:22 tg3-3.43f/tg3.mod.c
-rw-r--r-- root/root 15153 2006-01-09 15:35:22 tg3-3.43f/LICENSE
-rw-r--r-- root/root 56601 2006-01-09 15:35:22 tg3-3.43f/ChangeLog
-rw-r--r-- root/root 2359 2006-01-09 15:35:22 tg3-3.43f/Makefile
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd tg3-3.43f
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.27456
+ umask 022
+ cd /usr/src/rpm/BUILD
+ cd tg3-3.43f
+ make
make -C /lib/modules/2.6.12-9-386/build
SUBDIRS=/usr/src/rpm/BUILD/tg3-3.43f modules
make: *** /lib/modules/2.6.12-9-386/build: No such file or directory. Stop..
make: *** [default] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.27456 (%build)


RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.27456 (%build)
-------------------

--
OOzy

--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
https://lists.ubuntu.com/mailman/listinfo/ubuntu-users



Relevant Pages

  • RE: gigabit ethernet stuck at 100Mbps
    ... You can force it's speed negotiation. ... gigabit ethernet stuck at 100Mbps ... The switch port connected to the D-Link DGE-530T card shows a green ... TCTL (Transmit ctrl register) 0x000400FA ...
    (Debian-User)
  • Re: AMD 800 with 256MB RAM
    ... Upgrading to a 7200 rpm drive will make a difference, especially when copying and moving files, accessing large files and when the system makes use of the pagefile. ... As for the Video card you won't notice much of any difference unless you do gaming, watch/edit video clips, or work with graphics programs like CAD/CAM software or publishing/pre-print software. ...
    (microsoft.public.win2000.general)
  • Kerneloops & Intel 82541PI Gigabit Ethernet woes
    ... A few months ago I ran into a problem where my Gigabit Ethernet card ... the card again recently with a fully updated Lenny install. ... One of the side effects of the gigabit is that I get a kerneloops ...
    (Debian-User)
  • Re: netgear wg511t - wireless network card
    ... There are also madwifi RPMs of a similar nature on lvn. ... -go to the atrpms site and get the required rpm ... take this card, for this linux version.. ... if it doesn't really natively support any cards that i can ...
    (Fedora)
  • RE: gigabit ethernet stuck at 100Mbps
    ... mii-tool doesn't seem to understand gigabit speeds, ... At least ethtool knows that the card is capable of gigabit. ... > You can force it's speed negotiation. ... gigabit ethernet stuck at 100Mbps ...
    (Debian-User)