Re: dsl-g604t port forwarding (static ip help)

On Sat, Mar 14, 2009 at 11:02 PM, Ray Parrish <crp@xxxxxxx> wrote:

James Takac wrote:
Hi Guys

I'm having problems getting the port forwarding to word on said modem. I
have
the main pc hooked up via the ethernet port directly and my others are
wireless. I understand that I need to set up static ip's for port
forwarding
to work but that's where I'm running into problems. Already been googling
around a bit to no avail. The most comprehensive instructions I've come
across assume a windows system alas. And it seems setting up the dns and
such
is a lil different in ubuntu (8.04 here). Currently all my pc's are on
roaming mode as it's the only way I've been able to connect to the net.
Once
I can get the static ip's working I SHOULD be fine with the port
forwarding

DLink's tech site suggests the following using a windows system

Select the 'Use the following IP address' option:
IP address: 10.1.1.99
Subnet mask: 255.0.0.0
Default Gateway: 10.1.1.1 (your router's address)
DNS: 10.1.1.1 and 61.88.88.88 (or whichever your provider is using)

Any help appreciated

James

Hello again,

OK, I found the user manual for yoiur modem online, and it is located here.

<http://www.seattlewireless.net/index.cgi/DlinkDslG604t>

From another link on that page I found a wiki page that claims that
youe modem does not have a web interface like mine, so you will need to
use the telnet command shown below to get into it's configuration. It is
Linux based, and the following Wiki page has the set up procedure for it
using Telnet. You need to scroll down a ways to find them.

<http://wiki.openwrt.org/OpenWrtDocs/Hardware/D-Link/DSL-G604T>
/
telnet 192.168.1.1
/
Evidently not all DSL modems have a web browser- based cinfiguration
interface as I had assumed before. Your's evidently has both telnet and
ftp access to it's interface.

Anyway, those pages should get you up and runnimg in short order.

Later, Ray Parrish

-

Human reviewed index of links about the computer
http://www.rayslinks.com
Poetry from the mind of a Schizophrenic
http://www.writingsoftheschizophrenic.com/


--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-users


if you can't connect to the internet using static ip, you need to know the
dhcp client's config on your pc.
as I stated before go to the network config and uncheck the roaming mode and
use the dhcp configuration, then in the console use the following:

ifconfig
cat /etc/resolv.conf

and write down the parameters and that would be the info needed to
configurate static ip address.

as I've just seen that your modem/router doesn't have a web-based method to
configurate port forwarding, so you'll have to read your manual to do that
using telnet, it's not difficult at all, although I haven't done it for
years.

remember something roaming mode is just like using the dhcp config in
network config, but it's not the same.
and if you can use roaming mode and dhcp config, surely you can use static
ip.


--
"It is human nature to think wisely and act in an absurd fashion."

"Todo el desorden del mundo proviene de las profesiones mal o mediocremente
servidas"
--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Relevant Pages

  • Re: dsl-g604t port forwarding (static ip help)
    ... I'm having problems getting the port forwarding to word on said modem. ... OK, I found the user manual for yoiur modem online, and it is located here. ... use the telnet command shown below to get into it's configuration. ... interface as I had assumed before. ...
    (Ubuntu)
  • Re: dsl-g604t port forwarding (static ip help)[RESOLVED]
    ... I'm having problems getting the port forwarding to word on said modem. ... use the telnet command shown below to get into it's configuration. ... dhcp client's config on your pc. ...
    (Ubuntu)
  • Re: AS5300 in POS environment
    ... If you are seeing the extra DEL characters, ... not to do TELNET. ... You can see what the router is sending on the modem link with the following ... Some comments on your config: ...
    (comp.dcom.sys.cisco)
  • Re: Probleme with nm-16am v1.0
    ... the router worked perfectly until electrical outage then the tow cards ... sh start - displays the time the config was last saved *however* ... modem country microcom_hdms europe ... interface FastEthernet0/0 ...
    (comp.dcom.sys.cisco)
  • Re: Trouble setting up Cisco-UBR924 with Comcast
    ... After having more than one cable modem fail this year, ... cable router. ... Something must be missing in my config. ... then use a Cisco with two ethernet ports to route if you're set on the ...
    (comp.dcom.sys.cisco)