Re: external monitor

norman said the following on 14/04/09 17:54:
I am using Ubuntu 8.10 with an Inspiron 1525 and I wish to connect an
external monitor to operate independently and not simply copy the same
settings as the laptop monitor. I have tried looking in Google but have
not found anything helpful. The only thing I came across was a reference
to using the Fn key in combination with the F8 key but when I tried this
nothing happened.

Could some kind person point me in the right direction please from where
I may get some positive help.
As the other poster mentioned, xrandr is the right tool.

I've done this on a Dell Inspiron 1525 with 8.04, it works.

You might find better tools to do this, please search for other
possibilities first. The following is purely manual hackery, might not be
suitable for newbies.

First thing first, plug all monitors! :) (I still remember a couple of hours
spent futilely trying to get my Eee 701 booting of the network, plugging the
network cable actually helps...)

Then run xrandr all by itself and see what you have.

(This is on my Insp 9400) and I have a 1024x768 VGA and a 1440x900 screen on
the laptop:

hakan@photon:~$ xrandr
Screen 0: minimum 320 x 200, current 2464 x 900, maximum 2880 x 1024
VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 304mm
x 228mm
1024x768 60.0*+ 75.1 70.1 60.0 59.9
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 60.0
720x400 70.1
LVDS connected 1440x900+1024+0 (normal left inverted right x axis y axis)
367mm x 230mm
1440x900 59.9*+ 59.9
1280x800 60.0
1280x768 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
TMDS-1 disconnected (normal left inverted right x axis y axis)
TV disconnected (normal left inverted right x axis y axis)

Note the first line above. My maximum resolution is 2880x1024. Now, this
wasn't so when I started. The default X11 max resolution is much smaller
than this. You would like to change this. Total amount of pixels you used to
be able to have is 2048x2048=4194304 but you might have this in any way you
like and they might have changed this by now. You can check this with
looking at your X11's log file in /var/log.

You increase this with the following modification to /etc/X11/xorg.conf but
first, make a backup!

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Virtual 2304 1024
EndSubSection
EndSection


Add the resolution of your screens in the way you'd like to lay them (the
above is for a 1024x768 + 1280x1024 screen used for the 1525. If you define
a resolution too big or too small, you might end up with gaps or overlapping
areas between the screens.

Test this xorg.conf: sudo X -config /etc/X11/xorg.conf :1

This will start a second X11, if you want to go back to the original, any
time use the keys CTRL-ALT-F7.

Make sure your X runs succesfully! If not, revert to your backup.

If OK, logout and login again (you might like to restart gdm/kdm at that
point as well).

OK, now, remember I had two screens, similar to yours and xrandr recognised
these.

Now decide how you want to lay out your screens. Xrandr has some nifty
options which make things easier.

Some samples:
Put the VGA into the right of LVDS:
xrandr --output VGA-0 --right-of LVDS

Force a particular screen to a particular resolution:
xrandr --output LVDS --mode 1440x900

You can also make these permanent by putting them into the xorg.conf (don't
do it until you're comfortable with the options)
Again, some stuff from my xorg.conf, places foo to the left of bar, sets
them to enabled and defines which one is preferred (and yes, they're really
called foo and bar, go figure).

Section "Monitor"
Identifier "bar"
Option "Preferred Mode" "1440x900"
Option "Position" "1024 0"
Option "Enable" "true"
Option "Preferred" "true"
Modeline "1440x900" 106.29 1440 1520 1672 1904 900 901 904 932
-HSync +Vsync
EndSection

Section "Monitor"
Identifier "foo"
Option "Preferred Mode" "1024x768"
Option "Position" "0 0"
Option "LeftOf" "bar"
EndSection

Hope it works for you.


--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Relevant Pages

  • Re: Auto resize forms
    ... is on the left monitor, with the form open in design view. ... The forms still have be to designed to be usable at the lowest resolution ... screens. ...
    (microsoft.public.access.forms)
  • Re: Multi monitors in OS X
    ... exactly the same image and they must be the same number of pixels. ... screens, will then display very different numbers of pixels. ... If the resolution chosen by the user happens to be the native one ... If the monitor is able to support scaling an image at a different ...
    (comp.sys.mac.system)
  • Re: splash screen flicker
    ... Click on the Monitor tab and increase the resolution. ... rez of the splash screen;-) it's independent of the desktop ... small rez screens "on-the'-fly" to fit - which may be the cause ...
    (microsoft.public.windowsxp.video)
  • Re: Two identical screens
    ... I've had similar problems in the past when using an invalid refresh rate on ... Get your daughter to wind the resolution and refresh rate down to ... Monitor and pick the 60Hertz setting] ... Then she can wind up the resolution to the screens native resolution if ...
    (uk.comp.misc)
  • Triple multiheaded CDE works :) except when logging out and back in ??
    ... monitor setup working. ... the remander spread across all three screens. ... # This loads the DBE extension module. ... Identifier "Keyboard1" ...
    (comp.unix.solaris)