USB-serial converter recognised but not mounted
- From: Colin Law <clanlaw@xxxxxxxxxxxxxx>
- Date: Sat, 31 Oct 2009 18:00:32 +0000
I have a USB to serial converter. When I plug this in on a Ubuntu 9.04
machine it works fine. With lsusb I see
Bus 003 Device 007: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
and in dmesg I see
[ 8139.812054] usb 3-2: new full speed USB device using uhci_hcd and address 7
[ 8140.020285] usb 3-2: configuration #1 chosen from 1 choice
[ 8140.022817] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 8140.022863] usb 3-2: Detected FT232BM
[ 8140.022958] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
However on a Xubuntu 9.04 machine lsusb shows
Bus 001 Device 004: ID 0403:6001 Future Technology Devices
International, Ltd FT232 USB-Serial (UART) IC
which seems ok, but dmesg only shows
[ 1287.847468] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 1288.126514] usb 1-1: configuration #1 chosen from 1 choice
and the ttyUSB0 is not available.
I suspect that the fact that it is Xubuntu is not relevant.
Any suggestions on where to go from here would be much appreciated.
Colin
--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
- Prev by Date: Re: Proposed Repositories - GPG errors
- Next by Date: Re: Which VM?
- Previous by thread: Kubuntu reference
- Next by thread: dclock no more works after upgrade to karmic
- Index(es):
Relevant Pages
|
