Re: Problem with Fritz!WLAN USB Stick N



Am 02.07.2010 11:38, schrieb Markus Schönhaber:
02.07.2010 11:30, Markus Schönhaber:


The first thing I'd try is to install the
linux-backports-modules-wireless-<something>
package that matches your kernel, for example
linux-backports-modules-wireless-2.6.32-23-generic

Better use the package without version number, i. e. like
linux-backports-modules-wireless-lucid-generic
this will make sure that the package which actually contains the modules
will always get installed, even when you update your kernel.


I did that. Now uname -a says:
Linux zaphod 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC
2010 i686 GNU/Linux

In /var/log/syslog there are some interesting lines:
Jul 2 15:03:21 zaphod NetworkManager: <info> (wlan1): device state
change: 4 -> 5 (reason 0)
Jul 2 15:03:21 zaphod NetworkManager: <info> Activation
(wlan1/wireless): connection 'Auto Desaster Area' has security, and
secrets exist. No new secrets needed.
Jul 2 15:03:21 zaphod NetworkManager: <info> Config: added 'ssid'
value 'Desaster Area'
Jul 2 15:03:21 zaphod NetworkManager: <info> Config: added 'scan_ssid'
value '1'
Jul 2 15:03:21 zaphod NetworkManager: <info> Config: added 'key_mgmt'
value 'WPA-PSK'
Jul 2 15:03:21 zaphod NetworkManager: <info> Config: added 'psk' value
'<omitted>'
Jul 2 15:03:21 zaphod NetworkManager:
nm_setting_802_1x_get_pkcs11_engine_path: assertion
`NM_IS_SETTING_802_1X (setting)' failed
Jul 2 15:03:21 zaphod NetworkManager:
nm_setting_802_1x_get_pkcs11_module_path: assertion
`NM_IS_SETTING_802_1X (setting)' failed
Jul 2 15:03:21 zaphod NetworkManager: <info> Activation (wlan1) Stage
2 of 5 (Device Configure) complete.
Jul 2 15:03:21 zaphod NetworkManager: <info> (wlan1): supplicant
connection state: scanning -> disconnected
...
Jul 2 15:04:01 zaphod kernel: [ 102.950446] usb 2-1: received invalid
command response got 12572 bytes, instead of 256 bytes and the resp
length is 32 bytes
Jul 2 15:04:01 zaphod kernel: [ 102.950463] ar9170 invalid resp:
00000000: 1c 31 00 00 00 00 00 00 00 c6 c9 0c 00 c6 41 0d .1............A.
Jul 2 15:04:01 zaphod kernel: [ 102.950470] ar9170 invalid resp:
00000010: 00 c6 41 0d 00 14 18 00 00 14 18 00 00 14 18 00 ..A.............
Jul 2 15:04:08 zaphod kernel: [ 109.492182] usb 2-1: no command
feedback received (-110).
Jul 2 15:04:08 zaphod kernel: [ 109.492209] ar9170 cmd: 08 01 00 00 04
01 1d 00 03 00 00 00 ............
Jul 2 15:04:08 zaphod kernel: [ 109.493057] Pid: 1094, comm: phy0 Not
tainted 2.6.32-23-generic #37-Ubuntu
Jul 2 15:04:08 zaphod kernel: [ 109.493064] Call Trace:
Jul 2 15:04:08 zaphod kernel: [ 109.493123] [<de83bb38>]
ar9170_usb_exec_cmd+0x1c8/0x210 [ar9170usb]
Jul 2 15:04:08 zaphod kernel: [ 109.493142] [<de83f6d1>]
ar9170_write_reg+0x51/0xa0 [ar9170usb]
Jul 2 15:04:08 zaphod kernel: [ 109.493154] [<de842e04>]
ar9170_set_leds_state+0x14/0x20 [ar9170usb]
Jul 2 15:04:08 zaphod kernel: [ 109.493165] [<de842ece>]
ar9170_update_leds+0xbe/0x130 [ar9170usb]
Jul 2 15:04:08 zaphod kernel: [ 109.493196] [<c016375e>]
run_workqueue+0x8e/0x150
Jul 2 15:04:08 zaphod kernel: [ 109.493208] [<de842e10>] ?
ar9170_update_leds+0x0/0x130 [ar9170usb]
Jul 2 15:04:08 zaphod kernel: [ 109.493218] [<c01638a4>]
worker_thread+0x84/0xe0
Jul 2 15:04:08 zaphod kernel: [ 109.493231] [<c0167800>] ?
autoremove_wake_function+0x0/0x50
Jul 2 15:04:08 zaphod kernel: [ 109.493239] [<c0163820>] ?
worker_thread+0x0/0xe0
Jul 2 15:04:08 zaphod kernel: [ 109.493247] [<c0167574>]
kthread+0x74/0x80
Jul 2 15:04:08 zaphod kernel: [ 109.493254] [<c0167500>] ?
kthread+0x0/0x80
Jul 2 15:04:08 zaphod kernel: [ 109.493269] [<c0104087>]
kernel_thread_helper+0x7/0x10
Jul 2 15:04:08 zaphod kernel: [ 109.493278] phy0: writing reg 0x1d0104
(val 0x3) failed
Jul 2 15:04:10 zaphod kernel: [ 111.728409] usb 2-1: no command
feedback received (-110).
Jul 2 15:04:10 zaphod kernel: [ 111.728437] ar9170 cmd: 08 01 00 00 04
01 1d 00 03 00 00 00 ............
Jul 2 15:04:10 zaphod kernel: [ 111.728458] Pid: 1094, comm: phy0 Not
tainted 2.6.32-23-generic #37-Ubuntu
Jul 2 15:04:10 zaphod kernel: [ 111.728470] Call Trace:
Jul 2 15:04:10 zaphod kernel: [ 111.728529] [<de83bb38>]
ar9170_usb_exec_cmd+0x1c8/0x210 [ar9170usb]
... and so on

Do someone know anybody who can tell me what is going on?

Thanks in advance
Leander Jedamus

--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users



Relevant Pages